manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Ltech
  6. •
  7. Temperature Controllers
  8. •
  9. Ltech T2 User manual

Ltech T2 User manual

T2
LED Color Temperature Controller
1 2
T2 is the 2.4GHz RF wireless synchronization color temperature controller which adopts LTECH multiple
global initiate technology, the control system consists of two parts, the RF remote control and the receiver,
realize the signal synchronization on unlimited receivers within effective distance, a very good solution for the
LED project needs sync control wirelessly.
1. Technical Specs:
2. Product Size:
T2 2.4G LED Color Temperature Controller Manual
Can RF remote the functions of color temperature dimming, quick color temperature/brightness selection, DIY
and delay off and so on. User-friendly color wheel for color temperature adjustment, unique LED state light
for sync change indicated, user can simply know the LED working state from distance by checking the remote
control.
Input Voltage: DC5V Built-in Lithium Battery
Working Current: ≤30mA
Working Frequency: 2.4GHz
RF Remote Distance: 30m
Remote Option: sync control unlimited receivers
T2 Remote Control
Standby Time: ≤6 Months
Battery Capacity: 1000mAh
Dimensions: L145×W55×H22(mm)
Package Size: L168×W102×H28(mm)
Weight (G.W.): 200g
T2
T3-CV T3-CC
T2 2.4G LED Color Temperature Controller Manual
Input voltage: DC12V-DC48V
Output voltage: DC3V-DC46V
Output current: CC 350/700/1050mA ×2CH (CT control)
Output power: 1.05W~48.3W ×2CH Max 96.6W
Compatible remote control: T1/T2/T2M/T3/T3M/T3X
Working temperature: -30℃~55℃
Dimension: L175×W44×H30(mm)
Package size: L178×W48×H33mm
Weight (G.W.): 150g
T3-CC Receiving controller (current 3 in 1)
Input voltage: DC5V-DC24V
Max current load: 6A×2CH Max 12A (CT control)
Max output power: 60W/144W/288W(5V/12V/24V)
Compatible remote control: T1/T2/T2M/T3/T3M/T3X
Working temperature: -30℃~55℃
Dimension: L175×W44×H30(mm)
Package size: L178×W48×H33mm
Weight (G.W.): 140g
T3-CV Receiving controller
T2 RF remote control
T3-CV/T3-CC Remote holder
Learning ID:
If you want to control multiple receivers synchronously, just follow the above instructions for each receiver.
Cancelling ID:
3. The learning ID method of remote control:
4. Components Description for Receiver and Remote Control:
1. Turn on the receiver and remote control
Short press "ID learning button" on the receiver, the running light keeps on, then long press any keys
(except on/off key) on the remote, the running light returns to flash (the buzzer long beep, the indicator light
flashes 3 times), activated successful.
2.
1. Turn on the receiver and remote control.
2. Press “ID learning button” on the receiver more than 8 seconds, the buzzer beep twice, delete all the learned remote.
DC12V~48V
T3-CC
Current selection switch
(Method of operation see below form)
Remote ID
Learning Button
Power Input Socket
LED Lamp Connected Socket
DC5V~24V
T3-CV
Remote ID
Learning Button
Power Input Socket LED Lamp Connected Socket
www.l tech-le d.com
34
6. System Diagram:
Unlimited receivers can be installed within effective distance, no wiring needed between the receivers,
which can be less or more in quantity according to your need for the installation, if you want to increase
or decrease the receivers, just activate or cancel the control ID on the remote control will be fine, no any
changes and effects on the other receivers.
No quantity limited of the receivers.
On/Off
Touch Color Circle
Speed+/Speed-
CT+/CT-
(Press 3 seconds saved)
CT Shortcut Keys
BRT+/BRT-
Sync Status Indicator Light
Delay Off Keys
BRT Shortcut Keys
(Keep pressing to adjust
brightness continuously)
Scene-save Keys
★press “DELAY OFF KEY” in 3 seconds, the buzzer can be on or off.
5. Other Special Functions:
Turn on the remote, long press the on/off key for 5 seconds until the red light flashes 3 times, and then the
green light flashes, the numbers of the green flash will be the frequency point of the remote. you can only edit the
frequency point after 3 seconds.
Method 2: long press “on/off” key over 5 seconds, the green light flashes, the flash times plus 1 means the
frequency point accumulate 1. In short, long press the “on/off” key 5 seconds each time, the frequency
point will accumulate 1, which will again become value 1 when added to 12, and that cycle repeats.
A. Reset Function:
B. Check and Edit the Frequency Point on the Remote:
Long press simultaneously, release the 2 keys after 3 seconds, the remote will auto off,
means reset completed. and then could restart the remote.
Feature: Reset function is available when remote operates abnormally.
Operation:
a.
Multiple remotes sync-control becomes available when they use the same frequency point.
Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user.
b.
After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID. Attn:
Feature:
Check the Frequency Point on the Remote:
Edit the Frequency Point on the Remote: In frequency changing state
Method 1: short press any key from 1-9, the frequency point will be 1-9 correspondingly, the green light will flash in
the same numbers. Press again any key or touch the color circle to exit the frequency edit state.
Frequency
Rate
T2 2.4G LED Color Temperature Controller Manual T2 2.4G LED Color Temperature Controller Manual
www.l tech-le d.com
56
7. Wiring Diagram:
Update Time: 2016.3.9
8. The Charging Methods for Remote Control:
1. When charging, please connect USB cable to the mobile charger or computer with the USB interface.
4. Red indicator light flickers meaning low battery and need to be charged. charging in low battery will affect life of
battery.
3. No memory effect in the lithium battery of remote control. Follow the standard charging procedure even for the first
three times, no need over charge.
2. The blue indicator light flickers while charging, and turns green means the charging is completed. The remote
control can be chargeable even at the OFF state, on which the indicator light is black.
5. The remote should be full charged and stored under low cold drying while a long time without being operated.
And please full recharge every 3 months.
10. Warranty Agreement:
9. Attention:
1. The product shall be installed and serviced by a qualified person.
7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.
Please also ensure that the cable is secured tightly in the connector.
4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is
mounted in a water proof enclosure.
1. We provide lifelong technical assistance with this product:
★This manual only applies to this model. LTECH reserves the right to make changes without prior notice.
4. Any amendment or adjustment to this warranty must be approved in writing by LTECH only.
3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer. LTECH shall
not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
2. Warranty exclusions below:
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement and
covers manufacturing faults only.
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
T2 2.4G LED Color Temperature Controller Manual T2 2.4G LED Color Temperature Controller Manual
www.l tech-le d.com

This manual suits for next models

2

Popular Temperature Controllers manuals by other brands

Solo SL4824 Series quick start guide

Solo

Solo SL4824 Series quick start guide

Daikin FWEC2 Installation and operation manual

Daikin

Daikin FWEC2 Installation and operation manual

Siemens RDF30U Technical instructions

Siemens

Siemens RDF30U Technical instructions

iT+ 30.3009.54.IT instruction manual

iT+

iT+ 30.3009.54.IT instruction manual

Daikin 669529101 Installation & maintenance data

Daikin

Daikin 669529101 Installation & maintenance data

CommScope FDH 3000 user manual

CommScope

CommScope FDH 3000 user manual

Danfoss ECL Comfort 100M User's guide and installation instructions

Danfoss

Danfoss ECL Comfort 100M User's guide and installation instructions

Xetron STC-1000Pro user manual

Xetron

Xetron STC-1000Pro user manual

Blaupunkt TS-S1 Getting started

Blaupunkt

Blaupunkt TS-S1 Getting started

domat UC905 quick start guide

domat

domat UC905 quick start guide

Sea-Bird Electronics SBE 49 FastCAT user manual

Sea-Bird Electronics

Sea-Bird Electronics SBE 49 FastCAT user manual

NexSens TS210 user manual

NexSens

NexSens TS210 user manual

Hubbell GAI-TRONICS TempSense TS200 manual

Hubbell

Hubbell GAI-TRONICS TempSense TS200 manual

Auber Instruments SYL-2381-mA instruction manual

Auber Instruments

Auber Instruments SYL-2381-mA instruction manual

White Rodgers 756-50 installation instructions

White Rodgers

White Rodgers 756-50 installation instructions

OWIM HG00073A Operation and safety notes

OWIM

OWIM HG00073A Operation and safety notes

Warner Instruments FireRight LT instruction sheet

Warner Instruments

Warner Instruments FireRight LT instruction sheet

Omron E5CS instruction manual

Omron

Omron E5CS instruction manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.