Ltl Acorn Ltl-5511 MG User manual

LTL ACORN ®
Infrared Digital Scouting Camera
Ltl-5511 MG/WMG
720P Video
USER’S MANUAL
LTL ACORN ®

Version: Ltl-5511M-01
TABLE OF CONTENTS
General Information.......................................................................................................................1
1.1 Features ............................................................................................................................... 1
1.2 Application..........................................................................................................................2
1.3 Illustration ........................................................................................................................... 2
Quick Start.......................................................................................................................................6
2.1 Load Batteries .....................................................................................................................6
2.2 Insert SD Card..................................................................................................................... 6
2.3 Enter Test Mode ..................................................................................................................7
2.4 Enter Live Mode .................................................................................................................9
2.5 Advantages of two horizontal PIR design ......................................................................... 9
Advanced Settings.........................................................................................................................11
3.1 Parameter Settings............................................................................................................. 11
3.2 File Format........................................................................................................................13
3.3 Set up Camera on PC ........................................................................................................ 14
3.4 Set up MMS Function on PC ............................................................................................ 17
3.5 Set up SMTP Function on PC ........................................................................................... 20
3.6 MMS Remote Control & Table of Command Code.......................................................... 23
3.7 View Local MPNO Name and Signal Strength on TFT LCD Screen ............................... 25
3.8 Camera Working with MMS .............................................................................................26
Ltl-5511MG/WMG Products .......................................................................................................28
4.1 Parts................................................................................................................................... 28
4.2 Models for Purchase.......................................................................................................... 28
Important Information.................................................................................................................29
5.1 Prevent from Short-Circuits .............................................................................................. 29
5.2 Power Supply and Battery Box ......................................................................................... 30
5.3 SD Card.............................................................................................................................30
5.4 Auto Adjustment on Video Length....................................................................................30
5.5 850nm and 940nm IR LED............................................................................................... 30
Firmware Upgrades......................................................................................................................31
6.1 Firmware Upgrades...........................................................................................................31
Warranty Information..................................................................................................................32
Appendix I Technical Specifications............................................................................................33
Appendix II Package Contents ....................................................................................................36
Appendix III Instruction for Installing Battery Box..................................................................37
Appendix IV Instruction for Installing Camera with Battery Box...........................................39
LTL ACORN ®

- 1 -
GENERAL INFORMATION
Introduction
Ltl-5511MG/WMG is the third generation of 5511 series scouting camera. With its highly
sensitive Pyroelectric Infrared Radial (PIR) sensor the camera detects the sudden change of
ambient temperature caused by moving game in a region of interest (ROI), triggered to take
pictures/videos.
1.1 Features:
Programmable 1.3, 5 or 12-Megapixel high resolution.
Programmable 320x240, 640x480 or 1280x720 video size.
Ltl-5511WMG with FOV of 100 degrees.
44 LEDs greatly improve the quality of night picture and video.
Ltl-5511 series (non-wide lens) infrared night vision LEDs 850nm flash range as far as
25m, low-grow 940nm 20m.
Ltl-5511W series infrared night vision LEDs 850nm flash range as far as 20m,
low-glow 940nm 15m.
In “Cam + Video” mode, camera takes both pictures and video at every trigger event.
Ultra low standby power consumption. Extremely long in-field life (in standby mode, up
to 6 months with 12 ×AA batteries).
LTL ACORN unique two horizontal PIR patented design comes up with a 100° angle of
induction, makes our camera activated in advance and gets ready to shoot, this
split-second process could be short as 0.2 second.
The design of two horizontal PIR improves accuracy on shooting, reduce false trigger.
Perform in the most extreme temperatures from -22°F (-30°C) to 158°F (70°C).
Compact size. Well designed to deploy covertly.
Rapid trigger time (1 second).
In Time Lapse setting, the camera automatically and constantly takes pictures/videos at
specified interval. This is very useful when observing plants flowering, birds building
nest, or monitor unattended properties such as parking lots.
With Timer setting On, the camera can be programmed to work in specified period
exclusively. This feature can work together with Time Lapse feature.
Convenient to be mounted on trunk or tripod.
Serial Number setting enables you to code locations in the photos. This helps
multi-camera users identify the location when reviewing the photos.
Built-in 2.36” TFT LCD color display to review images and videos.
Date, time, temperature and moon phase would be stamped on the bottom of the
pictures.
Lockable and password protected.
LTL ACORN ®

- 2 -
Users can configure the Camera on the computer, or directly on the built-in TFT screen.
Advanced Remote Cellular Technology transmits images to your cell phone and/or
email account constantly at lower battery consumption and shorter transmission time,
compared to similar products on the market.
Get SMS Text alert when battery power level gets low.
Check cellular signal reception on the screen.
Operates globally via 2G GSM/GPRS network. Supports four bands: 850 / 900 / 1800 /
1900MHz.
1.2 Application
Trail camera for hunting
Animal or event observation
Motion-triggered security camera, for home, office and community
1.3 Illustration
Figure 1.1 shows the front view of the camera (Part # Ltl-5511MG)
Figure 1.2 shows the bottom view of the camera (Part # Ltl-5511M)
Figure 1.3 shows the back view of the camera (Part # Ltl-5511M) and front view of the
battery box (Part # Ltl-MM3)
LTL ACORN ®

- 3 -
Figure 1.1: Front View of Ltl-5511MG
LTL ACORN ®

- 4 -
Figure 1.2: Bottom View of Ltl-5511M
The camera provides the following connections for external devices: USB 2.0 port, SD card slot,
TV out jack, and external DC power in jack. The 3-way Power/Mode Switch is used to select the
main operation modes: OFF, ON and TEST.
To power up the camera, install four NEW high-performance alkaline or lithium AA batteries in
the camera. FOR BETTER PERFORMANCE, WE RECOMMEND USING HIGH ENERGY
LITHIUM AA BATTERIES. To achieve longer in-field life, always install the additional
battery box which contains four more AA batteries. (Please refer to Appendix III: Instruction for
Installing Battery Box)
CAUTION
RISK OF EXPLOSION IF BATTERY REPLACED
BYAN INCORRECT TYPE
DISPOSE OF USED BATTERIESACCORDINGTO THE
INSTRUCTIONS
LTL ACORN ®

- 5 -
Figure 1.3: Back View of Ltl-5511M and Front View of Battery Box
CAUTION: If you are not using the camera for an extended period of time, it is highly
recommended to remove the batteries from the camera to avoid possible acid leak that may
damage the camera and void the warranty.
In addition, battery is not included in our package, be sure to purchase a qualified battery,
please pay attention to following instructions especially for lithium battery:
First, the specification of battery is 18650 3.7V rechargeable lithium battery.
Second, to avoid short-circuit faults, please load the battery as the polarity sign on the
battery compartment.
Third, to prevent the environment from damaging .Please do not throw battery away
casually. The battery may explode if damaged or disposed in high temperature.
Fourth, use specified charger only, charging time depends on battery capacity and current
of charger.
LTL ACORN ®

- 6 -
QUICK START
2.1 Load Batteries
To install batteries on the camera (Part # Ltl-5511M ), please follow the instructions below.
Follow direction of arrow, push left slip switch, it will pop out.
Install 4 AA batteries. Make sure the polarity matches the sign on the cover.
Replace the cover.
To install the additional battery box (Part # Ltl-MM3), please refer to Appendix III: Instructions
For Installing Battery Box)
Alternatively the camera can run on an external 6V~12V DC power source (optional). When
both external power and batteries are connected, the camera will be powered by the external one
preferentially. Bundled with our external solar power supply (purchased separately), the camera
could work in the field over one year without changing batteries.
When battery level gets low, in the TEST mode, the message “Low Battery” would be shown on
the TFT LCD screen.
The MMS wireless camera will automatically send a “Low battery” text alert to your cell phone.
Meanwhile, the battery level would be shown as Code B1/B2/B3 on the received MMS pictures.
B3 means high level and B1 indicates the level is low and you may need to change the batteries
soon.
2.2 Insert SD Card
The camera does not come with internal memory. It will not work without a SD (Secure Digital)
memory card or SDHC (High Capacity) card. Before inserting the SD card, please make sure the
write-protect switch is on “OFF” side (NOT in the “LOCK” position). The supported memory
capacity is up to 16GB. If you use a SD card which capacity is larger than 16GB, please make
sure that you test it in advance.
LTL ACORN ®

- 7 -
Figure 2-2
Attention: Please switch the camera to OFF mode before loading or removing batteries/ SD
card.
2.3 Enter Test Mode
Switch to the TEST position to enter the Test mode. In this mode you can take pictures or video
clips like a regular digital camera, or enter the Menu to set up parameters. On the keypad there
are four “shortcut” functional keys (see Figure 2-3) working as below:
Figure 2-3
Press the key to set the camera to shoot video clips.
Press the key to set the camera to take pictures.
LTL ACORN ®

- 8 -
Press the SHOT key to manually trigger the shutter. A photo or video (depending
on the camera setting) will be taken and saved to the SD card. If the display shows
“CARD PROTECTED” when you press the SHOT key, switch the power OFF, remove
the SD card and slide its write-protect switch to OFF.
Press the REPLAY key to review/playback photos/videos on the TFT screen, or a
connected TV monitor. Use and key to navigate.Use and key to zoom
in and out the pictures.Under zoom in,short press to move picture rightwards,
long press to move picture upwards, short press to move leftwards, long press
to move downwards.
There is another key MENU, on the keypad that allows you to program the camera to work the
way you want. Please refer to 3.1 Parameter Settings in Advanced Operation section.
Under the test mode, one useful function you would like is testing the work area of the
Pyroelectric Infrared Radial (PIR) sensor, specifically the sensing angle and distance. To perform
the test:
First strap the camera on a tree aiming the region of interest (ROI).
Walk slowly from one side of the ROI to the other parallel to the camera. Try different
distances and angles from the camera.
If the Motion Indicator flashes red, it indicates the position you located is detected by
the right PIR sensor. If the Motion Indicator flashes blue, it indicates the position you
located is detected by the left PIR sensor. When Motion Indicator both flashes red and
blue ,it indicates the position you located is detected by overlapping area of left and
right PIR sensors, it is the region where camera is ready to shoot.
Through the test, you can find the best place to mount the LTL ACORN camera. In general, it is
recommended to place the camera 3 to 6 feet (1 to 2 meters) above the ground.
To avoid potential false triggers due to temperature and motion disturbances, please do not aim
the camera at a heat source (i.e. the sun) or nearby tree branches and limbs. The ideal direction to
aim at is North or South. Also, remove any limbs close to the front of the camera.
LTL ACORN ®