Ltl Acorn Ltl-6210MC User manual

Ltl Acorn ®
Mobile H D V i d e o Scouting Camera
Ltl-6210M Series
USER’S MANUAL

TABLE OF CONTENTS
General Information
1.1 Features
1.2 Application
1.3 Illustration
Quick Start
2.1 Insert SIM Card
2.2 Load Batteries
2.3 Insert SD Card
2.4 Enter Test Mode
2.5 Enter Live Mode
2.6 Advantages of Prep Sensors
Advanced Settings
3.1 Parameter Settings
3.2 File Format
3.3 Set up MMS Function on Camera
3.4 Set up Camera on PC
35 Set up MMS Function on PC
3.6 Camera Working with MMS
3. 7 View Local MNOP Name and Signal Strength on TFT Display
Ltl-6210M Series Products
4.1 Parts
4.2 Models for Purchase
Important Information
5.1 Power Supply
5.2 SD Card
5.3 Auto Adjustment on Video Length
5.4 850nm and 940nm IR LED
5.5 Mount on Tripod
5.6 FAQs on MMS Function
Firmware Upgrades
6.1 Firmware Upgrades
Warranty Information
Appendix I Technical Specifications
Appendix II Package Contents

GENERAL INFORMATION
1.1 Introduction
The Ltl Acorn M Series (Model Ltl-6210MC and Ltl-6210MM) is the first generation of our HD
video scouting camera. Bundled with the MMS-module (Multimedia Messaging Service) LTL-
MM2, the standard scouting camera (Ltl-6210M) can be upgraded to work as a remote cellular
camera. With its highly sensitive Passive Infra-Red (PIR) sensor, the camera detects the sudden
change of ambient temperature caused by moving game in a region of interest (ROI), triggers to
take pictures/videos, and sends the images via GSM network to the user’s cell phone or email
account.
Features:
• Programmable 2/ 5 / 12-Megapixel high-quality resolution.
• HD video with sound:H.264/AVC format 1080 and 720P
• Infrared night vision LEDs flash range : 850nm—82 feet; 940nm—43 feet.
• In “Cam + Video” mode, camera takes both pictures and video at every trigger event
• Continuous shooting interval time about 0.5 seconds (stamp off)
• Ultra low standby power consumption. Extremely long in-field life (in standby mode, up
to 6 months with 12 x AA batteries)
• Unique side Prep Sensor design provides wider sensing angle and enhances
camera’s response speed
• Perform in the most extreme temperatures from -22°F to 158°F
• Compact size (5 ½ x 3 ½ x 2 ½ inches). Well designed to deploy covertly
• Impressively quick trigger time (1.2 second)
• In Time Lapse setting, the camera automatically and constantly takes pictures/videos at
specified interval. This is very useful when observing plants flowering, birds building
nest, or when monitoring unattended properties such as parking lots
• With Timer setting on, the camera can be programmed to only work in specified period
every day. This feature can work together with Time Lapse feature
• Backpack-looking tree grabber makes mounting and aiming a snap
• Serial Number setting enables you to code locations in the photos. This helps multi-camera
users identify the location when reviewing the photos
• Built-in 2.0” TFT color display located at the bottom cover to review images and videos
• Date, time, temperature and moon phase can be stamped in the pictures
• Lockable and password protected
• MMS image sizes : 640 x 480
• Users can configure the Camera and MMS function either by running the enclosed CD
on the computer, or directly on the built-in TFT display.
• Can change several language of the menu through setting country in MMS menu or in PC
setup.
• Separation of the Camera and the MMS module provides users flexibility: starting with
the value models a standard scouting camera, and upgrading to the premium model with
MMS function.
• SD card can be set in “Cycling Save” mode, which automatically deletes the earliest
photos or videos and makes room for new ones.

• If local area mobile signal is too weak to send MMS, user may let the camera send text
message(SMS) instead. Message content includes the time the picture is taken and the
Camera serial number.
• Our Advance Remote Cellular Technology transmits images to your cell phone and email
account constantly at lower battery consumption and shorter transmission time,
compared with products of its kind on the market.
• Automatically send text alert when battery power level goes low
• Check cellular signal information on the built-in TFT display in the field
• All sent MMS pictures will be saved in the MMS folder in the SD card
• Internal antenna design makes the camera portable while still emitting strong signal. When
using the iron security box, user can choose the external antenna design.
• Operates globally via GSM/GPRS network. Supports four bands: 850 / 900 / 1800 /1900MHz.
1.2 Application
• Trail camera for hunting
• Animal or event observation
• Motion-triggered security camera, for home, office and community
• All other indoor/outdoor surveillance where invasion evidence needed
1.3 Illustration
• Figure 1.1 shows the front view of the camera (Part # Ltl-6210M)
• Figure 1.2 shows the bottom view of the camera (Part # Ltl-6210M)
• Figure 1.3 shows the back view of the camera (Part # Ltl-6210M) and front view of LTL-
MM2

Figure 1.1: Front View of Ltl-6210M
Figure 1.2: Bottom View of Ltl-6210M
The camera provides the following connections for external devices: USB 2.0 port, SD card slot,
TV out jack, and external DC power in jack. The 3-way Power/Mode Switch is used to select the
main operation modes: OFF , ON and TEST .

To power up the camera, install four NEW high-performance alkaline or lithium AA batteries in the
camera. FOR BETTER PERFORMANCE, WE RECOMMEND USING ENERGIZER LITHIUM
AA BATTERIES. To achieve longer in-field life, always install 12 AA alkaline batteries.
Figure 1.3: Back View of Ltl-6210M
CAUTION: If you are not using the camera for an extended period of time, it is highly
recommended
that you remove the batteries from the camera to avoid possible acid leak
that may damage the camera which would void the warranty.

QUICK START
2.1 Insert SIM Card (Only for Model Ltl-6210MM)
You need to purchase the SIM card from your
local Mobile Phone Network perators(MPNO),
making sure they provide Multimedia
Messaging Service (MMS). Ask them for the
relevant information to configure the MMS
settings on your camera.
(Please reference 3.4 Set up MMS Function
on
PC in the Advanced Operation section.)
Insert the SIM card into the slot at the bottom
of the camera. Push once to insert, twice to get
out.
Figure
2-1 MMS-module

2.2 Load Batteries
To install batteries on the camera (Part # Ltl-6210M), please follow the instructions below.
• Open the bottom cover by pulling down the lock hole.
• Push the cover of the battery compartment and release. It will pop out.
• Install 12 AA batteries. Make sure the polarity matches the sign on the cover.
• Replace the cover.
Alternatively the camera can run on an external 6V~12V DC power source(optional), preferably
2A (6V) or 1A (12V). When both external power and batteries are connected, the camera will be
powered by the external one preferentially. Bundled with our external solar power supply
(purchased separately), the camera can work in the field over one year without changing batteries.
When battery level gets low, the Motion Indicator in the LED array will flash blue. On Model
Ltl-6210MM, a “Battery Low” text alert will be sent automatically to the user’s cell phone or
email account.
2.3 Insert SD Card
The camera does not come with internal memory. The camera will not work without a SD (Secure
Digital) memory card or SDHC (High Capacity) card. Before inserting the SD card into the card
slot, please make sure the write-protect switch on the side of the SD card is “off” (NOT in the
“Lock” position). The supported memory capacity is up to 32GB.
CAUTION: ALWAYS SWITCH THE CAMERA TO OFF MODE BEFORE YOU INSTALL OR
REMOVE THE BATTERIES OR THE SD CARD.
2.4 Enter Test Mode
Switch to the TEST position to enter the Test mode. In this mode you can take pictures or video
clips like a regular digital camera, or enter the Menu to set up parameters. On the keypad there
are four “shortcut” functional keys (see Figure 2-3) working as below:
Figure 2-2

• Press the key to set the camera to shoot video clips
• Press the key to set the camera to take still pictures
• Press the SHOT key to manually trigger the shutter. A photo or video (depending
on the camera setting) will be taken and saved to the SD card. If the display shows “CARD
PROTECTED” when you press the SHOT key, switch the power OFF, remove the SD card
and slide its write-protect switch to off.
• Press the left arrow key to enter the MMS parameters setting mode.
• Press the REPLAY key to review/playback photos/videos on the LCD screen, or a
connected TV monitor. Use and key to navigate. Press the left arrow key to magnify
the picture up to 16 times. Press and hold the up arrow key to move up the magnified picture,
the down arrow key to move down; lightly press the up arrow key to move to the right of the
picture and light press the down arrow key to move to the left. To replay videos, press the
right arrow key to start or end the playing. Push the menu key in replay mode to trigger the
deletion prompt.
There is another key, MENU , on the keypad that allows you to program the camera to work the
way you want. Please make reference to 3.1 Parameter Settings in the Advanced Operation
section.
Under the test mode, one useful function you would like is testing the work area
of the PIR (Passive Infrared) sensor, specifically the sensing angle and distance. To perform the
test:, follow the instructions below:
• First strap the camera on a tree aiming the region of interest (ROI).
• Walk slowly from one side of the ROI to the other in front of the camera. Try different
distances and angles from the camera.
• If the Motion Indicator flashes blue, it indicates the position from where you are
detected by one of the side Prep PIR sensors. If the Motion Indicator flashes red, it
indicates the position from where you are captured by the main PIR sensor.
By doing this test, you can find the best placement when mounting and aiming the Ltl Acorn
camera. In general, you are recommended to place the camera 3 to 6 feet (1 to 2 meters) above
the ground.
To avoid potential false triggers due to temperature and motion disturbances, please do not aim
the camera at a heat source (i.e. the sun) or nearby tree branches and leaves. The ideal direction to
aim at is North or South. Also, remove any big leaves close to the front of the camera.
2.5 Enter Live Mode
Switch to the ON position to enter the live mode. The Motion Indicator will flash red for about
10 seconds and the camera start working by itself without any manual handling. It will at once
shoot pictures or record videos when game or other objects enter the PIR area of the main sensor
directly. If the game enters the PIR area of the prep sensors from the side, the prep sensors detect
the movement and activate the camera. If the game keeps moving into the PIR area of the main
sensor, the camera takes photos/videos immediately. If the game roams away after entering the
PIR area of the prep sensors, the camera will power off and enter standby mode.
2.6 Advantages of Prep Sensors
In general, to save battery power, an Infer-Red camera is in “sleep” mode, with only the PIR
sensor working. When game is detected by the PIR sensor, the camera is powered on and starts

shooting pictures. The time period from being activated to starting firing is called trigger time.
The trigger time varies among different scouting camera brands in the market, generally from 1
to 5 plus seconds. Our Ltl Acorn scouting camera has an impressive 1.2 second trigger time.
With other brands of cameras, when game passes across very quickly, the picture may only
capture the rear part of the body, and possibly nothing at all. Our Ltl Acorn solves this issue with
the unique side prep PIR sensors design. The combination of the two side prep sensors and the
main sensor comes up with a 100 to 120° angle of induction, a very wide scope far outweighing
the 50° angle of the camera lens. When game first crosses the PIR area of the prep sensor, the
camera is activated and ready to shoot after 1 second. If the game continually enters into the PIR
area of the main sensor, the camera takes pictures immediately, therefore catching the whole body
of the game. This split-second process could be as short as 0.2 second.
In the case the game browses only in the PIR area of the prep sensors, to avoid the camera being
powered on constantly, the system is designed to work in the following way: If the game does
not enter the PIR area of the main sensor and therefore not trigger the main sensor, the camera
will power off after 3 seconds. If the trigger events consecutively happened twice only in the PIR
area of the prep sensors, the camera will not be activated by the side prep sensors, but only by
the main sensor. So later on when the game enters the PIR area of the main sensor eventually,
since it is not in fast movement, the picture will by all means capture the whole body of the game
based on our standard 1.2 second response time.