Lucasey LG2510B User manual

2.25"
0.4"
(8Pl.) #10 x 1/2" Phillips Screws
Bottom Plate
(8Pl.) Rivets
(8Pl.) Rubber Feet
Adhered to Base
LG2510B INSTALLATION INSTRUCTIONS
LG2510B_Install (9/08) ©2008 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
Page 1 of 2
1 ...
1 ...
4 ...
4 ...
8 ...
Top Plate
Bottom Plate
Security Screws
#10-32 x 1/2" Phillips Machine Screws
#10 x 1/2" Phillips Tapping Screws
Component List
Determine the appropriate location on the furniture
for the monitor. Mark the front edge of the monitor's
plastic base. Mark a parallel line 3/4" back from the
previous line.
Carefully line up the front edge of the Bottom Plate
with the second line marked in step 1.
Attach the Bottom Plate to the furniture with the
provided #10 x 1/2" Phillips Tapping Screws
Remove the rubber feet from the LG Monitor Base.
1.
2.
3.
4.
LG2510B - Bolt Down Furniture Mount
for LG Models 42LC5DC/DCB/DCS & 42LC50C

Security Screws
(Requires Hex Key with hole
Sold Separately with LG2510K)
(4Pl.) #10-32 x 1/2" Phillips
Machine Screws
Top Plate
Monitor Base
(8Pl.) Tapping Screws
Provided with Base
Bottom Plate
Top Plate Assembly
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
Page 2 of 2
LG2510B INSTALLATION INSTRUCTIONS
LG2510B_Install (9/08) ©2008 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
5.
6.
7.
Attach the Top Plate to the Monitor Base with
the provided #10-24 x 1/2" Phillips Machine
Screws using the tapped holes in the Monitor Base
and with the Tapping Screws removed from the
Monitor Base.
Align the slots on the Top Plate Assembly with
the rivets on the Bottom Plate. Pull forward
on the Top Plate Assembly to lock the two plates
together.
Attach the LG monitor to the Monitor Base with the
provided Security Screws.
(Requires Hey Key with Hole, sold separately
with LG2510K - Release Key)
Monitor Removal
Align the Release Key with the middle of the mount
and Slide the Release Key between the Top Plate
Assembly and the Bottom Plate.
Once the Release Key is inserted all the way, the
top and bottom plates will release from each other.