luceco Guardian Slimline PIR Manual

Guardian Slimline
LED Floodlights – PIR
Installation & Operating Instructions
CRI
80
>
IP44
RATED 2
WARRANTY
year
standard
Tech Help Line
UK - 0330 0249 279
Non UK - [phone]
Supplied by LUCECO
Stafford Park 1, Telford,
Shropshire, England, TF3 3BD
Visit our website at
www.luceco.com
LFSP02.JH.11.2017
30,000
HOURS
NOTE – To comply with regulations, installation must be carried out by suitably
qualified competent person and in accordance with the current IEE Wiring
Regulations (BS7671) and Building Regulations. A copy of the instructions must
be left for the user/maintenance engineer for future reference.
For non-UK, please refer/consult local requirements
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/
ISOLATED BEFORE COMMENCING INSTALLATION
INSTRUCTIONS FOR NEW INSTALLATIONS
1. Turn OFF power supply, ensure all required equipment
and tools are present
2. The floodlight is supplied pre-wired with 1.0M of H05RN-F
cable, removing the need to open the housing
3. The floodlight is intended for exterior use and is IP44 rated.
Select a suitable mounting position. Recommended mounting
height shown in the adjacent table, area illuminated is typically
mounting height x3
Lumens Height Suggested Halogen Equivalent
600 2.0m - 3.0m 100W
1200 2.5m - 4.0m 200W
1800 3.0m - 5.0m 300W
3000 4.0m - 6.0m 500W
4. This product is supplied with a long bracket fitted by standard.
With a suitable mounting position:
a) Tilt floodlight forward in the bracket to allow access
to the bracket
b) Fit bracket to wall using suitable fixings (NOT SUPPLIED)
c) Tilt floodlight to desired angle and tighten fixing bolts
5. Connect the pre-wired cable to the electricity supply, observing
the correct polarity:
LIVE = BROWN
NEUTRAL = BLUE
EARTH = GREEN/YELLOW
Note - This product range is design for domestic outdoor use.
Not suitable for interior or commercial use. If outdoor
connection is required, use a suitably IP Rated junction box.
b c

Installation & Operating Instructions
Tech Help Line
UK - 0330 0249 279
Non UK - [phone]
Supplied by LUCECO
Stafford Park 1, Telford,
Shropshire, England, TF3 3BD
Visit our website at
www.luceco.com
LFSP02.JH.11.2017
Environmental Protection W.E.E.E (Wheelie Bin Symbol for EU ONLY)
This symbol is known as the “crossed-out” wheelie Bin Symbol”. When this symbol is marked on a product or battery, It means that it should not be disposed of
with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment.
Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your
co-operation is vital to ensure the success of these schemes and for the protection of the environment.
United Kingdom Warranty
For other territories and for further information, please see www.luceco.com for details
Products are protected by warranty for a period of 2 years from date of purchase against defects in material and workmanship (unless otherwise stated). Should a product
fail to perform as described within the warranty period it will be repaired or replaced with the same or equivalent product by Luceco, free of charge provided that you: (1)
return the product to us with shipping charge prepaid, (2) provide us with proof of the original date of purchase and (3) quote our return authorization number.
Repaired or replaced products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If in our
sole discretion, we are unable to repair or replace a defective product, we will refund the purchase price of the product.
This warranty will not apply if in our judgment, the product fails due to damage in shipment, handling, storage, accident, abuse or misuse, or if it has been used in a
manner not conforming to our product instructions, has been modified in any way, or has any serial number removed or defaced. Repair or attempted repair will void this
warranty. Our maximum liability under the terms of this warranty is limited to the purchase price of the product covered by the warranty.
The warranty is given under English Law. If any part of this warranty is deemed unenforceable (including any provision in which we exclude our liability to you) the
enforceability of any other parts of the warranty will not be affected. These terms do not reduce your statutory rights.
For Non-UK please contact Local Luceco Office for details. THESE TERMS AND CONDITIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Eventually, you may want to replace this fitting;
LUX TIME
MIN MIN
MAX
   
PIR Adjustments
The PIR Sensor can be aimed to cover the desired detection area,
and has a maximum range of up to 10 Meters over a 120° degree
area. PIR Settings allow the following adjustments
• Time ON = from 10 seconds (+/- 5 seconds) to 8 minutes
(+/- 2 minutes), turn the control clockwise to increase duration
the floodlight will illuminate for when movement is detected
• Ambient Light = 2 Lux to 2000Lux, ambient light controls when
the PIR will detect movement, 2000Lux will operate in most light
levels. Turn Anti-Clockwise to increase level of ambient light for
when the PIR will detect movement
Guardian Slimline LED Floodlight - PIR
Once the PIR has been initially set, check all fixings and electrical
connections and when safe, reinstate the power
Note - During the first 48 hours of operation, the PIR may cause
the LED floodlight to operate as it self adjusts to the ambient
light level of the installation
OVERRIDE FACILITY - the PIR sensor is quipped with
this function. It allows the PIR sensor to operate in
Dusk till Dawn mode. However it will only activate depending
on ambient light level set on the PIR
To initiate Override Facility turn the power supply
OFF/ON/OFF/ON within 2 seconds
To turn Override Facility OFF, turn the power
off for a minimum of 5 seconds, this will reset back
to full automatic PIR detection of the installation
PIR
VIEWED FROM BELOW