luceco Smart CASTRA LSMFSP-05 Manual

Installation & Operating Instructions
IP65
RATED 3
WARRANTY
year
standard
CRI
80
>
30,000
HOURS
Powered by the BG Home app
1 2
Tech Help Line
UK - 0330 0249 279
Non UK - [phone]
Supplied by LUCECO
Stafford Park 1, Telford, Shropshire,
England, TF3 3BD
Visit our website at www.luceco.com
Kontakt
UK - 0330 0249 279
Non UK - [phone] - 29
Geliefert von Luceco GmbH
Holstenplatz 20b,
22765 Hamburg DEUTSCHLAND
Besuchen Sie uns auf www.luceco.de
Support Technique
UK - 0330 0249 279
Non UK - [phone]
Notice fournie par
Luceco SAS France & Belux 3
Rue de Courtalin, Magny Le Hongre 77700
FRANCE & BELUX
Visitez note site Web www.luceco.fr
Assistenza tecnica telefonica
UK - 0330 0249 279
Non UK - [phone]
Fornito da BG Electrical Ltd Nexus
Italia, Via Amman 10 33170
Pordenone, Italy
Visitate il nostro sito www.luceco.com
Servicio de asistencia telefónica
UK - 0330 0249 279
Non UK - [phone]
(EU) Luceco SE
C/Bobinadora 1-5 08302 Mataró
Barcelona, Spain
Visite nuestra web en www.luceco.com
SECURITY FLOODLIGHT PIR
LSMFSP-05
LSMFSP.RO.06.2021
PRODUCT MUST BE INSTALLED THROUGH A
SWITCH TO ACTIVATE CONNECTION MODE
This product range is designed for domestic outdoor use. Not suitable for interior use. If outdoor connection is required, use a suitably IP rated
junction box and terminals. Glands used must be suitable for HO5RN-F cable as supplied with the luminaire. The Floodlight is pre-wired with 1.0M
of H05RN-F cable, removing the need to open the housing. The external exible cord or cable of this luminaire cannot be replaced; if the cord is
damaged, the luminaire shall be destroyed.
NOTE – To comply with regulations, installation must be carried out by suitably
qualied competent person and in accordance with the current IEE Wiring
Regulations (BS761) and Building Regulations. A copy of the instructions must be
left for the user/maintenance engineer for the future reference.
For non-UK, please refer/consult local requirments
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/
ISOLATED BEFORE CIMMERCING INSTALLATION
5mm
40mm
Turn OFF power supply, ensure all required
equipment and tools are present. For optimal
detection, avioid placing near sources of heat
e.g. extractor vents
• Power Drill
• Applicable screws and fixings
NOTE – During the rst 48 hours of operation, the PIR may cause the LED
oodlight to operate as it self adjusts to the ambient light level of the installation.
Voltage :220-240V AC, 50-60Hz
Wireless IEEE standard : Wi- 2.4Ghz b/g/n
The PIR Sensor can be aimed to cover the desired detection area, and has
a maximum range of up to 10 Meters over a 120° degree area. Detection
range is controlled by the angle of the PIR, for maximum range, point PIR
directly horizontal. To reduce range, tilt the PIR towards the ground.
PIR Settings in the APP allow the following adjustments:
• Time ON = from 10 seconds (+/- 5 seconds)
to 30 minutes (+/- 2 minutes),
• Ambient Light = 2 Lux to 2000Lux, ambient light controls when the PIR
will detect movement. For typical dusk light levels, we suggest around
50% setting.
• Sensititvity – Adjust the amount of movement needed to trigger the PIR
Dusk Till Dawn Mode:
The PIR features an internal photocell, that can detect light levels to come
on and stay on all night until set lux level is reached. Ideal for all night
illumination.
Night Glow Mode:
Allowing a 10% low light level continuous illumination, increasing to full
brightness when movement is detected, Ideal for security use or ensuring
some illumination at all times.
PIR

Installation & Operating Instructions
Powered by the BG Home app
Tech Help Line
UK - 0330 0249 279
Non UK - [phone]
Supplied by LUCECO
Stafford Park 1, Telford, Shropshire,
England, TF3 3BD
Visit our website at www.luceco.com
Kontakt
UK - 0330 0249 279
Non UK - [phone] - 29
Geliefert von Luceco GmbH
Holstenplatz 20b,
22765 Hamburg DEUTSCHLAND
Besuchen Sie uns auf www.luceco.de
Support Technique
UK - 0330 0249 279
Non UK - [phone]
Notice fournie par
Luceco SAS France & Belux 3
Rue de Courtalin, Magny Le Hongre 77700
FRANCE & BELUX
Visitez note site Web www.luceco.fr
Assistenza tecnica telefonica
UK - 0330 0249 279
Non UK - [phone]
Fornito da BG Electrical Ltd Nexus
Italia, Via Amman 10 33170
Pordenone, Italy
Visitate il nostro sito www.luceco.com
Servicio de asistencia telefónica
UK - 0330 0249 279
Non UK - [phone]
(EU) Luceco SE
C/Bobinadora 1-5 08302 Mataró
Barcelona, Spain
Visite nuestra web en www.luceco.com
4
3
5 6
With a suitable mounting position identified,
loosen main fixing bolt on the rear of the housing
and tilt to allow access to fixing holes.
Fit floodlight to the wall using suitable fixings.
Tilt and rotate floodlight to desired angle and securing
fixing bolt. Ensure product is secure.
LIVE = BROWN
NEUTRAL = BLUE
EARTH = YELLOW/GREEN
Connect the pre-wired cable to the electrical
supply, observing the correct polarity.
Note - Cables must be grounded
When connections are safe. re-isntate power.
Undo
LSMFSP.RO.06.2021
VIEWED FROM ABOVE
PIR

Installation & Operating Instructions
Powered by the BG Home app
Tech Help Line
UK - 0330 0249 279
Non UK - [phone]
Supplied by LUCECO
Stafford Park 1, Telford, Shropshire,
England, TF3 3BD
Visit our website at www.luceco.com
Kontakt
UK - 0330 0249 279
Non UK - [phone] - 29
Geliefert von Luceco GmbH
Holstenplatz 20b,
22765 Hamburg DEUTSCHLAND
Besuchen Sie uns auf www.luceco.de
Support Technique
UK - 0330 0249 279
Non UK - [phone]
Notice fournie par
Luceco SAS France & Belux 3
Rue de Courtalin, Magny Le Hongre 77700
FRANCE & BELUX
Visitez note site Web www.luceco.fr
Assistenza tecnica telefonica
UK - 0330 0249 279
Non UK - [phone]
Fornito da BG Electrical Ltd Nexus
Italia, Via Amman 10 33170
Pordenone, Italy
Visitate il nostro sito www.luceco.com
Servicio de asistencia telefónica
UK - 0330 0249 279
Non UK - [phone]
(EU) Luceco SE
C/Bobinadora 1-5 08302 Mataró
Barcelona, Spain
Visite nuestra web en www.luceco.com
Environmental Protection W.E.E.E (Wheelie Bin Symbol for EU ONLY)
This symbol is known as the “crossed-out” wheelie Bin Symbol”. When this symbol is marked on a product or battery, It means that it should not be
disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and
the environment. Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials
contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.
United Kingdom Warranty
For other territories and for further information, please see www.luceco.uk for details
Products are protected by warranty for a period of 3 years from date of purchase against defects in material and workmanship (unless otherwise stated). Should a product
fail to perform as described within the warranty period it will be repaired or replaced with the same or equivalent product by Luceco, free of charge provided that you: (1)
return the product to us with shipping charge prepaid, (2) provide us with proof of the original date of purchase and (3) quote our return authorization number.
Repaired or replaced products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If in our
sole discretion, we are unable to repair or replace a defective product, we will refund the purchase price of the product.
This warranty will not apply if in our judgment, the product fails due to damage in shipment, handling, storage, accident, abuse or misuse, or if it has been used in a
manner not conforming to our product instructions, has been modied in any way, or has any serial number removed or defaced. Repair or attempted repair will void this
warranty. Our maximum liability under the terms of this warranty is limited to the purchase price of the product covered by the warranty.
The warranty is given under English Law. If any part of this warranty is deemed unenforceable (including any provision in which we exclude our liability to you) the
enforceability of any other parts of the warranty will not be aected. These terms do not reduce your statutory rights.
For Non-UK please contact Local Luceco Oce for details. THESE TERMS AND CONDITIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Eventually, you may want to replace this tting;
LSMFSP.RO.06.2021
1. Download & create BG Home account
1.1. Download and Install the BG Home App on your Smart device 1.2. Create an account
2. Connecting to WiFi &setting up rst device
NOTE: If trying to setup multiple light ttings all connected to the same lighting power circuit, rst select and successfully set up one device. After this repeat Setup, the app should
automatically detect other devices in conguration mode and prompt you to connect. If not automatically detected, repeat add “WiFi equipment” setup.
1. Ensure that your lighting device is connected to the power supply and
turned ON.
2. When switched on, the lighting device will be in conguration mode (red
LED indicator in PIR will ash quickly).
Note: if the lighting device is not in conguration mode, turn the light switch
OFF and ON 4 times to active conguration mode – OFF for 1 second, ON for
1 second.
3. Go to the BG Home app and “Add Device”.
4. Follow the on-screen instructions to setup your device. Please make sure
your phone is connected to 2.4GHz WiFi (not 5GHz) so your device can be
discovered and setup successfully.
5. Once connected to WiFi, you will be prompted to select which device to
connect from those in conguration mode. Follow based on lighting device
you are setting up.
6. When successfully connected, the lighting device will stop pulsing and stay
switched on. Proceed to “Room” allocation and device “Naming”.
7. When successfully set up, the app will indicate a successful connection.
Scan the
QR code below
Scan the
QR code below