The open chamber of the UV-C lamp sterilizes and
disinfects surfaces and objects. In a very short time,
with an efficiency of up to 99.9%, it kills pathogens,
including the SARS-CoV-2, other viruses, bacteria and
fungi. The time of exposure depends on the distance
to the disinfected surface and the direct access of
radiation. It should be assumed that in the case of
direct access and a short distance of up to 4 m, the
time of 30 minutes is sufficient to carry out an
effective sterilization. In the entire room with a
maximum area of about 30 m2, the recommended
exposure time is 2 to 4 hours.
ATTENTION! People and animals are not allowed in
the room.
DESCRIPTION OF THE FUNCTIONING:
APPLICATION:
REPLACING AIR FILTER:
OPEN MODE CLOSED MODE
DIAGRAM OF BASE INSTALLATION
DIAGRAM OF RADIATION CHAMBER OPEN
SWITCHING THE OPERATING MODES OF THE VENTILATION SYSTEM:
REPLACING AIR FILTER (SCHEME)
SWITCH POSITIONING
SILENT MODE TURBO MODE
Knob open / closed mode
155°
165°
Please
replace the UV-C bulb after turning off the power.
REPLACEMENT OF UVC BULB:
The UV-C bulb chamber is closed, the ventilation
system is automatically turned on and the air flows
through the radiator chamber, which removes viruses,
bacteria, fungi, allergens, toxic volatile organic
compounds (VOC), unpleasant odors and fine dust
particles. It is safe for people and animals in the room.
We recommend using the device at all times when
new people are entering and leaving the room so that
the air is effectively cleaned on an ongoing basis.
Two operating modes to choose from:
ATTENTION! It is very important to carefully close the
UV-C bulb chamber so that the radiation does not leak
outside the device.
The Lumeelamp App is available for free download from AppleStore and GooglePlay.
Main functions:
A specially developed coatingFunctional Free Radicals - FFR
FFR
CHANGING THE FILTER
FFR
'
FFR
UV-C bulb
PHOTOCATALYTIC LAYER, ORIGINAL TECHNOLOGY - Lumee Photocatalytic Ionization – LPI
