Lumens LC200 User manual

LC200
CaptureVision Station
[Important]
User Manual - English
To download the latest version of Quick Start Guide,
multilingual user manual, software, or driver, etc.,
please visit Lumens
https://www.MyLumens.com/support

1
Table of Contents
Copyright Information.................................................................................2
Chapter 1 Safety Instructions...................................................................3
Chapter 2 Package Contents....................................................................4
Chapter 3 Product Overview.....................................................................5
3.1 Front panel................................................................................5
3.2 Rear panel.................................................................................5
3.3 RS-232/RS-485 I/O pin description..........................................6
Chapter 4 Instruction for installation.......................................................7
4.1 Product connection diagram...................................................7
Chapter 5 Function Description ...............................................................8
5.1 Real-time operation menu .......................................................8
5.2 Parameter setting.....................................................................9
5.3 Director....................................................................................25
5.4 File management....................................................................30
Chapter 6 Troubleshooting.....................................................................34
Addendum 1...............................................................................................36
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information...37

2
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not provided by
Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after
purchasing this product.
In order to keep improving the product, the information in this file is subject to change without
prior notice.
To fully explain or describe how this product should be used, this manual may refer to names
of other products or companies without any intention of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any possible
technological, editorial errors or omissions, nor responsible for any incidental or related
damages arising from providing this file, using, or operating this product.

3
Chapter 1Safety Instructions
Always follow these safety instructions when using the product:
1 Operation
1.1 Please use the product in the recommended operating environment, away from water or
source of heat.
1.2 Do not place product in tilted position or unstable trolley, stand or table.
1.3 Please clean the dust on the power plug prior to usage. Do not insert the product’s power plug
into a multiplug to prevent sparks or a fire.
1.4 Do not block the slots and openings in the case of this product. They provide ventilation and
prevent the product from overheating.
1.5 Do not open or remove covers, otherwise it may expose you to dangerous voltages and other
hazards. Refer all servicing to licensed service personnel.
1.6 Unplug the product from the wall outlet and refer servicing to licensed service personnel when
the following situations happen:
If the power cords are damaged or frayed.
If liquid is spilled into the product or the product has been exposed to rain or water.
2 Storage
2.1 Do not place the product where the cord can be stepped on as this may result in fraying or
damage to the lead or the plug.
2.2 Unplug the product during thunderstorms or if it is not going to be used for an extended
period.
2.3 Do not place the product or accessories on top of vibrating equipment or heated objects.
3 Cleaning
3.1 Disconnect all the cables prior to cleaning and wipe the surface with a dry cloth. Do not use
alcohol or volatile solvents for cleaning.
4 Batteries (for products or accessories with batteries)
4.1 When replacing batteries, please only use similar or the same type of batteries
4.2 When disposing of batteries or products, please adhere to the relevant instructions in your
country or region for disposing of batteries or products
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
Notice :
The changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
IC Warning
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out
in the interference-causing equipment standard entitled “Digital Apparatus,”ICES-003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de
Classe A prescrites dans la norme sur le material brouilleur: “Appareils Numeriques,”NMB-003 edictee par
l’Industrie.
EN55032 CE Warning
Operation of this equipment in a residential environment could cause radio interference.
KC Warning
This equipment is Industrial (Class A) electromagnetic wave suitability equipment and seller or user
should take notice of it, and this equipment is to be used in the places except for home.

4
Chapter 2Package Contents
LC200
Power Adapter
Power Cord
Appearance may vary
depending on country/region
Quick Installation Guide
RS-232/RS-485
Connector
(x2)
Mounting Metal Plate
(x2)
M3x6 Flat Head
Screw(x4)
Quick Installation Guide

5
Chapter 3Product Overview
3.1Front panel
3.2Rear panel
No
Name
Function Descriptions
1
RECORD
1. Start/Stop recording
2. Press and hold for 3 seconds: Pause Recording
2
SNAPSHOT
Capture a single photo
3
STREAM
On/Off image streaming
4
Single Channel
Display a single channel screen
5
PIP
Switch to PIP display
6
PBP
Switch to PBP display
7
Three
Channel
Switch to three-channel display
8
Customize
Customize layout display
9
USB 3.0 Port
USB hard disk interface for storage
10
Switch Channel
Switches between signal sources
11
Channel 1 ~ 3
Quickly switch to CH1/CH2/CH3 signal sources
12
Line In (4 CH)
Line In / Mic In audio input
13
HDMI In (4 CH)
HDMI signal source input
14
Line Out
Allows line audio out to amplifier transfer
15
HDMI 2 Program
Main screen output, display the recording or streaming
screen and layout
16
HDMI 1 MultiView
Operation interface output; display the device parameter
setting menu and image management
17
USB 2.0 Port
Connect USB keyboard/mouse device operation menu
18
RS-232/RS-485 Port
Control the device through RS-232/RS-485
19
Ethernet
Connecting to LAN
20
DC IN 12 V
DC 12 V power connector
21
Power
On/Off the device power
1
2
3
4
5
10
11
6
7
8
9
14
15
13
12
16
18
19
21
20
17

6
3.3RS-232/RS-485 I/O pin description
RS-232
Pin NO.
Function
1
TX+
2
RX-
3
GND
RS-485
Pin NO.
Function
4
T/R+
5
T/R-
6
GND
6
5
4
3
2
1

7
Chapter 4Instruction for installation
4.1Product connection diagram
Microphone
Amplifier
Line/MIC device Audio In
Display
(Program)
Display
(MultiView)
Router
HDMI output
LAN
Power Supply
Power Cord
HDMI Source Input
Document
Camera
Computer
IP Camera
Audio Output
Speaker
External
Keyboard/
Mouse
Environment
Control
Equipment
USB Control
RS-232/RS-485 Control
Box Camera

8
Chapter 5Function Description
5.1Real-time operation menu
Connect the HDMI1 MultiView output to the display panel to show the real-time
operation menu
Connect the keyboard/mouse through the USB port and use the keyboard/mouse to
select the menu settings
No
Icon
Name
Function Descriptions
1
Parameter
setting
Perform the system network setting, recording/streaming
compress setting
2
Casting
Management
Input signal source selection, audio management,
recording/streaming control, output version selection, and
network video camera control
3
File
management
Conduct the video file content management, including the
following functions: Upload, download, delete, replay video files
4
About
Display the current firmware version and relevant production
information of LC200
5
NA
Device IP
When connecting to the router, the current assigned device IP
address will be displayed
1
5
4
3
2

9
5.2Parameter setting
This Section provides descriptions of the web-based interface to control the display
items. HDMI MultiView only provides items of [System Settings] and [Video Settings].
5.2.1System Settings
5.2.1.1 System Settings
You may set up the device’s basic information, initial date and time, and
others here.
1
2
3
4
5
6
7