Lumens VS-KB30 Use and care manual

FW003 - VS-KB30 FW Update Manual 1
VS-KB30 Firmware(FW) Update
FW version: [SETUP]> [KEYBOARD SETTING]> [MODEL INFO].
Type
Ver.
Name/ Extension
Note
Master
0.x.xL
KEYBOARD.bin
If the original FW is 0.x.xL, please download 0.x.xL version
If the original FW is 2.x.xL, please download 2.x.xL version.
Version 0.x.xL CAN’T update to 2.x.xL due to the hardware
limitation.
2.x.xL
KEYBOARD.bin
Webpage
V2.x.x
V2.x.x.csf
Version V2.x.x CAN’T update to VA.x.x due to the
hardware limitation.
VA.x.x
VA.x.x.img
If you can’t access to check the original FW, please check the label/ serial number to identify.
Model
VS-KB30
VS-KB30,V01
Label
SN
V96xxxxxx
VC3xxxxxx
FW
Master
0.x.xL
2.x.xL
Webpage
V2.x.x / VA.x.x
VA.x.x
Double confirm to download the proper FW version to the unit.
Do NOT change the file name and extension.
Wrong file information may cause the FW update failed and unit not work.

FW003 - VS-KB30 FW Update Manual 2
1Device and Tool Preparation
VS-KB30
Power adapter/
power cord
PC or Laptop
USB Disk
(Format FAT 32)
2Master FW update
Version: 0.x.xL / 2.x.xL
FW File: KEYBOARD.bin
2.1 Save master FW to USB flash disk
2.1.1 Save the “KEYBOARD.bin” firmware file in the root directory (not inside of a folder)
2.2 Place the flash drive into the USB port on the back panel of the VS-KB30
2.3 Hold down the L/R Direction knob and click the power button into the “On” position.
2.4 The keyboard will display a confirmation that the upgrade is starting. (around 10 secs)
2.5 When keyboard shows “FIRMWARE UPGRADE SUCCEED”, power off unit and reboot.
Version 0.x.xL CAN’T update to 2.x.xL due to the hardware limitation.
DO NOT change the file extension.

FW003 - VS-KB30 FW Update Manual 3
3Webpage FW update
FW File: V2.x.x.csf / VA.x.x.img
3.1 Set your PC or laptop and VS-KB30 in the same network.
3.2 Type IP address of VS-KB30 on browser to access the login page.
3.2.1 User：admin
3.2.2 Password：(default is empty)
3.3 Follow the instruction to upload webpage firmware from PC or laptop.
3.4 Press start to upgrade the webpage firmware.
3.5 When keyboard shows “FIRMWARE UPGRADE SUCCEED”, power off unit and reboot.
4Check the firmware version.
4.1 Press “SETUP”, [KEYBOARD SETTING]=>[MODEL INFO] to confirm the firmware version.
Version V2.x.x CAN’T update to VA.x.x due to the hardware limitation.
DO NOT change the file extension.