LumiCeuticals LumiVIBE Go2 User manual

LumiCeuticals Page 1
Harmonic Light Energy
Systems Go2/Go3
Operations Guide

LumiCeuticals Page 2
Operations Guide
LumiCeuticals Light Energy Systems:
Chapter 1: Welcome LumiCeuticals Owner
1. Why LumiCeuticals?
2. Function and Features
Chapter 2: Operations
1. Basic Use Instructions
2. How to set frequency channels and sweeps
3. Care for your unit and Cautions:
4. Warranty and repair:
Chapter 3 Tips and Suggestions
1. Pad Placement (can include placement, children, pets, frequency of use etc.
2. Frequency and Light Energy Education Resources.
3 Daily use Tips
Indication for use: The LumiVibe Go2, LumiVibe Flex3, LumiVibe Grow6, LumiVibe Pro6 and LumiVibe Pro10 are intended for the relaxation of
muscles and relief of muscle spasms; temporary relief of minor muscle and joint aches, pains and stiffness; temporary relief of minor pain and
stiffness associated with arthritis; and to temporarily increase local blood flow.
LumiCeuticals makes no claims, representations or warranties regarding the ability of its products to cure, mitigate, prevent, repair or heal any
disease. Any information given in this guide should not be considered as a treatment, mitigation, fix, cure or repair for any disease, not is it to
be used as a replacement for qualified medical advice. A qualified medical professional should be consulted with regard to any condition
requiring medical attention. This guide is for educational purposes only. By opening the pages of this owner’s guide and/or using the
information within, you agree to these terms and conditions.
All Rights Reserved:
No part of this guide covered by the copyright herein may be reproduced, transmitted, stored or used in any form or by any means graphic,
electronic, or mechanical, including but not limited to photocopying, recording, scanning, digitizing, taping, web distribution, information
networks or information storage and retrieval systems without the prior written permission of LumiCeuticals.

LumiCeuticals Page 3
Chapter 1 Welcome to LumiCeuticals
Welcome to our LumiCeuticals Light Owner Community. We are so excited to have you join us. We see
such a wonderful future for harmonic light as the ultimate self-healing tool. We are thrilled to be
Lighting The Way….
Lighting the Way for pain-free living with FDA Clearance for Pain Relief and Injury Recovery
Lighting the Way for your power to recover and thrive.
Lighting the Way for your family, pets and community to shine with health and vitality
Lighting the Way for optimum performance and recovery
Lighting the Way for peace and harmony in mind, body and spirit.
Lighting the Way for your inner radiance to shine.
Lighting the Way for a bright financial future for all.
We invite you to use and share your LumiCeuticals light energy system every day.
1. The LumiCeuticals Advantage:
Our systems are all made in an FDA and ISO-9000 approved zero waste medical manufacturing
facility and your whole system is backed by a three year full warranty and service in the USA.
Our systems have a minimum of 500 medical grade invisium diodes in specific wavelengths of
red, infrared and blue light that are well researched for safety and efficacy.
Our systems combine light and vibrational energy by offering the important added benefit of
pulsing the light at 20 highly accurate standard frequencies and a possible 9999 custom
frequency options for a profound full body light energy experience that is simple to use and
program and unique in the marketplace.
Each controller has an automatic timer and contains EMF reduction chips for your health and
safety.
In addition to factory-set frequencies, our Professional System can be user programmed with
up to 9999 individual frequencies or 88 sweeps of your choice. This proprietary feature sets
us apart from any other light energy system on the market to date
All LumiCeuticals Systems come with additional Educational opportunities to further support
your use of your harmonic light system. For Further Information Contact:
[email protected]

LumiVIBE Go2 Operations Guide
Thank you for choosing LumiCeuticals Light equipment. This portable, re-chargeable hand-held light
unit will be one of your favorite tools for creating a healthy environment for your body. It is light-weight,
easy to use and effective for spot treatments and quick sessions. Please read this guide thoroughly
prior to operations in order to maximize the life and efficiency of the product and to provide you with
better results. This guide is meant to provide necessary information for: operations, warnings,
maintenance and precautionary practices, and warranty regarding this equipment.
Disclaimer: LumiCeuticals makes no claims regarding the ability of this or any LumiCeuticals product
to cure, mitigate, fix, prevent, repair or heal any disease. Information herein should not be in lieu of the
advice of a medical professional. This guide is for educational purposes only. By reading it, you agree to
all terms and conditions.
LumiVIBE Go2 Parts Checklist: May contain one or both of those listed.
--Pure Light Portable Hand held controller, with power supply, cord, car charger and Car charger USB
Connector. Controller may be operated independently of the blues buster pad. These are the only
chargers that can be safely used with our controller.
--Portable Blues Buster Pad, must be attached to the hand-held controller, but can provide light
without the hand-held portion being lit up.
--Portable Blue/Red Eye Mask, must be attached to the hand-held controller, but can provide light
without the hand-held portion being lit up.

Product Descriptions
LumiVIBE Go2 Portable Controller: The ‘star’ design emits 24 red and infrared light emitting diodes
and can safely be used anywhere on the body except into the eyes. The settings are the same as those
on the other LumiCeuticals light systems for 1 –7 and sweeps A, B. The C setting is a combination of B
and A. Do not use directly into the eyes.
LumiVIBE Go2 Blues Buster Portable Pad: This pad is to be used ONLY with the handheld
controller. It has 90 blue and infrared diodes. It is a high-performance, concentrated pad like the pain
buster pads used with the other LumiCeuticals controllers. Do not use it directly over the eyes.
LumiVibe Go2 Red/Blue Relaxation Eye Mask: This pad is to be used ONLY with the handheld
controller. It has 52 blue and 52 red diodes. It is a relaxation eye mask like the eye mask used with the
other LumiCeuticals controllers.
Indications for Use:
Uses of the LumiVIBE Go2 are as follows:
--Provides heat and light which studies have shown to relieve pain, stiffness and muscle spasm as well
and increasing local blood circulation and relief of injury.
Your LumiVIBE Go2 system will provide many hours of convenient light therapy. This system is
ideal for travel or for areas where electrical plugs are not available. The cordless hand held
portion of the unit provides a deep, targeted light experience that is highly effective. The blues
buster pad adds more diodes and therapy possibilities for painful spots and relaxation. The
ability to use variable factory set frequencies makes this a perfect tool for your wellness
toolbox. Use it anywhere: in your favorite chair, in your hotel room, car, or campground. We
encourage you to take your LumiVIBE Go2 everywhere you go!

Caring for Your system:
Do NOT:
Operate under water
Expose to moisture for a long period of time
Expose to heat and/or sub-freezing temperatures
Crease or excessively bend cords or wrap around pads or device
Stand or walk on unit or apply pressure to any part of the unit.
DO:
Store in a cool, dry place
Clean gently with a natural, non-alcoholic, non-bleach solution with a soft, damp cloth.
Use only with the power supply provided specifically for this controller by LumiCeuticals. Using any
power source other than the one provide will damage the controller and void the product warranty.
Contraindications:
Do not use over womb if pregnant, or over the site of an active cancerous growth.
Do not place the red/infrared handheld or blue/infrared buster pad over the eyes.
Do not use if light sensitive or taking light sensitive drugs such as tetracycline, without Medical approval.
Do not use if prone to seizures or epilepsy.
Other Precautions and Considerations:
Do not use over topical creams or ointments: they may increase the risk of skin irritation
Do not use with ice or cryotherapy: Effectiveness of the light may be impaired.
Monitor physical reaction to light session to prevent irritation or burning sensation.
Use only with building code approved electrical outlets.
Do not use in water, on a wet surface, or when skin is wet.
Do not use pins or metallic materials to hold the light pad in place.
When session is finished, press and hold the ‘off’ button to turn the power off to the LEDS
Disconnect the power plug gently to prevent damage to the unit.
Cease use if an area of the skin becomes sensitive or too warm.
Apply the light with gentle pressure; pressing harder does not render the lights more effective.

Set-Up and Operation of the LumiVIBE Go2 Portable Controller and Pad
The portable handheld should arrive fully charged. Should this not be the case or when the charge
expires do the following:
Charging the battery: Insert the power cable into a power outlet. Insert the 5V power supply jack
into the charging port located on the bottom of the hand-held device. Use LumiCeuticals provided
power cable.
The unit is charging when the red light on the top left-hand side of the controller is illuminated.
A full charge will take @ 60 –75 minute. The greenlight on the right-hand side of the controller
will illuminate when the charge is complete. DO NOT OVERCHARGE the unit. It shortens the life
of your system. Note: Using the Blue Pad uses more power and will shorten the length of a
charge. A charge system will usually last 2 –2.5 hours or more.
Your unit may be charged in your car. Use the connecting cords provided. LumiVIBE 2 is great
for travel. Always use with USA certified plugs or use an adaptor.
LumiVIBE Go2 may be used while the unit is charging if necessary. Take care to avoid electrical
shock. Do not leave a charging unit unattended if there are children present.
Starting your session:
Note: The controller may be used alone or with the blue pad and the blue pad may be used
without the controller being lit.
1. Connecting the pad to the controller: Visually line up the pins on the blues buster port, before
inserting the pad plug into the controller to avoid bending the pins. Be sure that the device is turned off
when connecting the Pad. Once the controller is turned on, the pad will light up as well. To use the pad
exclusive of the handheld controller lights, depress and hold the channel mode button for 5 seconds to
turn off the handheld lights.
2. Turning on the system: Press and hold the On/Off button conveniently located mid-way on the
controller. Each session will last 20 minutes and will automatically turn off. To turn the unit off at any
time, simply press and hold the On/Off button until all lights turn off.
3. Turning on only the pad: To turn on the lights on the pad but not the handheld controller, press the
top button of the handheld controller and hold it down for 6 seconds.
4. Changing the settings: Use the Mode selection button located approximately two inches above the
On/Off button. The Channel Display will enable you to know which channel you are choosing. Once the
unit is turned on, you can advance to any of the pre-programmed settings which are identical to the
other LumiCeuticals light energy controllers. Refer to the Nogier Frequency for Settings 1-7 and the B
setting Solfeggio lists found attached here at the Shine With Light owners website
www.shinewithlight.com . The Portable Handheld/blue pad diodes can be used safely anywhere on the

body except directly into the eyes. The blue pad has 90 diodes and the controller has 24 “star’ design
diodes.
Warranty Information:
LumiCeuticals warrants each piece of the equipment to be free of defects for a period of three years.
The warranty does not extend to any liability for medical expenses or for any other direct, indirect, or
consequential damages caused by failure, defect or malfunction of any LumiCeuticals equipment.
Warranty and Repair:
Please return defective or non-working equipment to a LumiCeuticals authorized service center.
Please notify us right away if you should notice any performance issue by filling out the warranty
questions at www.shinewithlight.com/contactus After submitting your customer service report you
will be contacted within 24 hours.