Lumination tradeSELECT LUMELSQ Series User manual

WARNING – This product contains chemicalsknownto the StateofCalifornia to cause cancer, birth
defects and/orother reproductive harm. Thoroughly wash hands afterinstalling, handling, cleaning,
or otherwise touching this product.
604038_INST_SHT 3/17
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should
always be followed including the following.
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
1. Rated for temperature range of 10°C-40°C (50°F - 104°F) and suitable for use in an
5. The use of accessory equipment is not recommended by the manufacturer and may cause
an unsafe condition.
INSTALLER:
•SEE UNIT LABEL FOR ADDITIONAL MODEL SPECIFICATIONS
•SAVE THESE INSTRUCTIONS FOR USE BY OWNER/OCCUPANT
IMPORTANT
The battery in this unit may not be fully charged. After electricity is connected to the unit,
let battery charge up to 24 hours. Then the normal operation of this unit should take
RECYCLING INFORMATION
All steel, aluminum and thermoplastic
parts are recyclable. All cartons contain
recycled materials.
LUMELSQ Series

INSTALLATION WIRING DIAGRAM
Warning:
using enclosed wire nuts.
J-Box Mounting
2. Then connect to AC power (Fig. A)
check light (Fig. C)
Conduit
OPERATION
minimum of 90 minutes.
To test this unit, let it charge correctly with AC power supply for a minimum of 24 hours
Wiring Diagram for LED Emergency Light