+
-
+
-
Tips
Sound indicators
Chime
Bird chirping
Wings fluttering
Water drops
Light
Tap the center top surface to activate
the dimmer. There are four levels of
brightness to choose from.
Volume
Slide two fingers up and down along
the curve at the center of the bowl to
adjust volume.
Speaker
Tap the center top surface closer to
the edge to receive or end a call.
Reset
Closing and re-opening Teno will
resolve most issues. If that doesn’t
work, hard re-set the system by
pressing the reset button.
Speaker on/off
Bluetooth/TWS
connected to device
Bluetooth
disconnected
Low battery
Bluetooth disconnect
If you don’t see “Teno” on your phone,
ensure that Teno is not connected to
another device. Disconnect first. If
connection problems continue, try
closing and re-opening Teno.
Maintenance and care
For fabric, wipe dust off the surfaces
using a dry, soft cloth. Do not use
liquid or aerosol cleaners. To remove
stains or dirt, we recommend using
melamine sponge cleaner (also
known as magic eraser) or a soft,
damp cloth and a solution of water
and mild detergent, such as
washing-up liquid. For outer shell,
gently wipe the shell using a soft, dry
cloth. Use a brush with soft bristles
for dust removal in grooves or crack
areas. Do not spray water or cleaner
directly onto the surface.
Scan me
Point your camera at
this QR code for a Teno
instructional video.
Play/Pause
Pick up/Hang up
double tap
Reject call
long hold
Light brightness control
single tap at center of
top surface to turn light on
or to change brightness
Play/Pause
Pick up/Hang up
double tap
Reject call
long hold
Volume -
slide down at
center of bowl curve
Volume +
slide up
at center of
bowl curve
Volume -
slide down at
center of bowl curve
Volume +
slide up
at center of
bowl curve
Instructions
Your Teno is controlled via touch. Separate two halves slightly to turn on light. Fully
separate to turn on speaker. Teno’s Bluetooth connection is automatically discoverable
from your device when you fully open Teno and hear the chime sound.
Pairing two Teno
(True Wireless Stereo)
Turn both on. Using two fingers,
double tap L or R bottom of the outer
shell of each one to sync them. You
will hear bird chirping when connected.
Bluetooth disconnect
Triple tap bottom of outer
shell. You will hear wings
fluttering when disconnected.
USB C charging port
Reset
press invisible button
next to charging port
LR
