Proximity distance settings
To choose the right parameter, press the according key on the remote by the instruction
below.
Button «1» - 27 cm
Button «2» –20 cm
Button «3» - 16 cm
Button «4»–12 cm
Door open delay settings
To choose the right parameter, press the according key on the remote by the instruction
below. This parameter controls the time during door will stay open.
Button «1» - 0.1 s
Button «2» –3 s
Button «3» - 6 s
Button «4» –9 s
Output mode settings
To choose the right parameter, press the according key on the remote by the instruction
below. This parameter must be set depending on your lock type. If your lock without power is
open –you need to set the parameter to «NO.» If the lock without power stays closed –«NC.»
Button «1» - NO
Button «2» –NC
Buzzer settings
To choose the right parameter, press the according key on the remote by the instruction
below.
Button «1» - Low volume
Button «2» –Standard volume
Save settings
After setting the parameter, you must see a blink indication according to the parameter
sector of the device. The device is in waiting mode. To confirm settings change, press the Sharp
button « ». To exit from settings mode, press start « ».