Lund Industries FE-CSMTS User manual

FE-CSMTS Ford Escaspe In-Dash Mount
Installation Instructions
Lund Industries, Inc is pleased to announce its multi-platform in-dash mount for 2003-2006
Ford Escape. The FE-CSMTS easily mounts in place of the factory AM-FM radio and allows
Datalux TX-200, Data911, Fujitsu “T” Series, Kontron, Motorola MW-800 & 520, Palomar,
Panasonic PDRC, Xplore iX104 & GII, and other displays to be mounted on the dash,
enabling easy access to touch screens and other functions. The unit tilts 25° and swivels 12°
for ease of viewing under high ambient light conditions. The FE-RRL Radio Relocator Bracket
repositions the factory radio under the dash.
Installation Instructions
1. Remove the factory radio.
2. Remove the glove box door.
3. Route radio cables down to the glove box.
4. Install radio relocate bracket in glove box. Secure bracket with (4) screws.
5. Plug in radio connectors & snap radio into bracket
6. Install (2) “U” clips into radio slot and secure by tightening bolts provided. “U” clips attach
to the black plastic around radio opening. Make bolts secure but do not over-tighten as
plastic could crack.
Note: Separating the face plate from the mounting bracket will make monitor installation
easier.
7. Mount monitor to face panel securely.
8. The plastic handles on the side of the mount allow the display to tilt up and down
and swivel left and right for best viewing.
SPECIALISTS IN EMERGENCY VEHICLE PRODUCTS SINCE 1978 • DESIGN, MANUFACTURING, DISTRIBUTION AND INSTALLATION
Rev. 10/05