Lutron Electronics HR-3023SD User manual

SD Card real time data recorder
Humidity/ dew/wet/Temp. , w/o wire
HUMIDITY RECEVER METER
Model : HR-3023SD
Your purchase of this
HUMIDITY RECEVER METER
marks a step forward for
you into the field of precision measurement. Although this Meter is a
complex and delicate instrument, its durable structure developed. Please
read the following instructions carefull yand always keep this manual
within easy reach.
OPERATION MANUAL

TABLE OF CONTENTS
1. FEATURES.............................................................................................................
1
2. SPECIFICATIONS.......................................................................................................
2
3. FRONT PANEL DESCRIPTION.............................................................................................
6
4. MEASURING PROCEDURE...............................................................................................
8
4-1 Hygro-Thermometer measurment ...................................................................................................
8
4-2 Change the temperature unit (
℃
,
℉
).............................................................................
9
4-3 Data Hold...................................................................................................................
9
4-4 Data Record ( Max./ Min. reading )....................................................................
9
4-5 LCD brightness select..................................................................................................
10
5. DATALOGGER...............................................................................................................
11
5-1 Preparation before execute datalogger function...........................................
11
5-2 Auto Datalogger( Set sampling time ≧
1 second ).......................................
12
5-3 Manual Datalogger ( Set sampling time = 0 second )......................................
13
5-4 Check time & sampling time information...............................................................................
13
5-5 SD Card Data structure.......................................................................................
14
6. Saving data from the SD card to the computer....................................................
15
7. ADVANCED SETTING...............................................................................................
16
7-1 SD memory card Format...................................................................................................
17
7-2 Set clock time
( Year/Month/Date, Hour/Minute/ Second ).............................................
17
7-3 Set sampling time (Second )............................................................................................
18
7-4 Auto power OFF management.....................................................................
18
7-5 Set beeper sound ON/OFF ...........................................................................
19
7-6 Set SD card Decimal character................................................................
19
7-7 PROBE PATTING................................................................................
20
7-8 Escape Setting..................................................................................................
20
8. POWER SUPPLY from DC ADAPTER.....................................................................
20
9. BATTERY REPLACEMENT.............................................................................
21
10. SYSTEM RESET.................................................................................................
21
11. RS232 PC serial interface.................................................................................
22
12. PATENT............................................................................................................
23

1. FEATURES
* Meter and probe w/o wire connect.
* Humidity/Temp. meter,
*Humidity measurement can show %RH and Temp.,
Dew , Wet , Temp.
* Temp. display unit default to ℃ or ℉.
* Meter can default auto power off or manual power off.
* Real time SD memory card Datalogger, it Built-in Clock
and Calendar, real time data recorder , sampling time set
from 1 second to 3600 seconds.
* Manual datalogger is available ( set the sampling
time to 0 ), during execute the manual datalogger
function, it can set the different position ( location ) No.
( position 1 to position 99 ).
* Innovation and easy operation, computer is not need
to setup extra software, after execute datalogger, just
take away the SD card from the meter and plug in the
SD card into the computer, it can down load the all the
measured value with the time information (
year/month/date/ hour/minute/second ) to the Excel
directly, then user can make the further data or graphic
analysis by themselves.
* SD card capacity : 4 GB to 16 GB.
* LCD with green light backlight, easy reading.
* Can default auto power off or manual power off.
* Data hold, record max. and min. reading.
* Meter power by UM3/AA ( 1.5 V ) x 6 batteries or DC 9V adapter.
* Probe power by UM4/AAA ( 1.5 V ) x4 batteries and
Support type c socket.
* RS232/USB PC COMPUTER interface.
* Available for the HVAC applications.
1

2. SPECIFICATIONS
2-1 General Specifications
Circuit Custom one-chip of microprocessor LSI
circuit.
Display TFT LCD size : 2.4 "
Measurement
function * Humidity/Temp. meter,DEW ,WET
Datalogger Auto 1, 2, 5, 10, 30, 60, 120, 300, 600,
1800, 3600 second
Sampling Time @ For anemometer measurement,
Setting range the sampling time setting value
should be ≧ 2 seconds.
@ Sampling time can set to 1 second,
but memory data may loss.
Manual Push the data logger button
once will save data one time.
@ Set the sampling time to
0 second.
@ Manual mode, can also select the
1 to 99 position ( Location ) no.
Memory Card SD memory card. 4 GB to 16 GB.
Advanced * Set clock time ( Year/Month/Date,
setting Hour/Minute/ Second )
* Auto power OFF management
* Set beep Sound ON/OFF
* Set sampling time
* Decimal point of SD card setting
* SD memory card Format
2

Data Hold Freeze the display reading.
Memory Recall Maximum & Minimum value.
Sampling Time Approx. 1 second.
of Display
Data Output RS 232/USB PC computer interface.
* Connect the optional RS232 cable
UPCB-02 will get the RS232 plug.
* Connect the optional USB cable
USB-01 will get the USB plug.
Operating 0 to 50 ℃.
Temperature
Operating Less than 85% R.H.
Humidity
Power Supply * Alkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 6 PCs,
meter or DC 9V adapter input. ( AC/DC power adapter is optional ).
Power Supply * Alkaline or heavy duty DC 1.5 V battery (UM4, AAA) x 4 PCs
probe * Support type c socket
Power Current Normal operation ( w/o SD card save
Meter data ) : Approx. DC 55mA.
When SD card save the data : Approx. DC 80 mA.
Power Current
Probe Approx. DC 15 mA.
Weight Meter : 232 g/ 0.51 LB. Probe : 93 g/0.204 LB
Dimension Meter 181 x 77 x 45 mm.
Probe 168 x 52 x 28 mm.
Accessories * Instruction manual.....................................
..................
1 PC
Included *
RHP-01 Probe.......................................................
1 PC
3

Optional * SD Card ( 4 G )
Accessories * Humidity Probe, RHS-221
* AC to DC 9V adapter.
* USB cable, USB-01.
* RS232 cable, UPCB-02.
* Data Acquisition software,SW-U801-WIN.
* Hard carrying case ( CA-06 )
2-2 Electrical Specifications (23±5 ℃ )
Humidity/Temp. meter
A. Humidity
Measuring Range 0 % to 95 % R.H.
Resolution 0.1 % R.H.
Accuracy ≧70% RH : ±(3% reading + 1% RH).
< 70% RH : ±3% RH.
B. Temperature
Measuring Range 0 ℃ to 50 ℃/32 ℉ to 122 ℉
Resolution 0.1 ℃/0.1 ℉
Accuracy ±0.8 ℃/1.5 ℉
Dew Point ( Humidity )
℃Range
-25.3
℃
to 48.9
℃
Resolution
0.1
℃
℉Range
-13.5
℉
to 120.1
℉
.
Resolution
0.1
℉
.
Remark :
* Dew Point display value is calculated from the
Humidity/Temp. measurement automatically.
* The Dew Point accuracy is sum accuracy value of
Humidity & Temperature measurement..
4

Wet bulb ( Humidity )
℃Range
-21.6
℃
to 50.0
℃
Resolution
0.1
℃
℉Range
-6.9
℉
to 122.0
℉
.
Resolution
0.1
℉
.
Remark :
* Wet bulb display value is calculated from the
Humidity/Temp. measurement automatically.
* The Welt bulb accuracy is sum accuracy value of
Humidity & Temperature measurement..
5

3. FRONT PANEL DESCRIPTION
Fig. 1
6

3-1 Display
3-2 Power Button ( LCD Brightness adjustment )
3-3 Hold Button
3-4 REC Button
3-5 ▲ Button (Unit Button )
3-6 ▼ Button ( Function Button )
3-7 TIME Button ( SET Button )
3-8 ENTER ( LOG Button )
3-9 SD card socket
3-10 Reset Button
3-11 RS-232 Output Terminal
3-12 DC 9V Power Adapter Input Socket
3-13 Battery Compartment/Cover
3-14 Battery Cover Screws
3-15 Stand
3-16 Meter Tripod Fix Nut
3-17 Humidity/Temp. sensor
3-18 Probe power indicator
3-19 Probe link indicator
3-20 Probe power Button
3-21 Probe batter cover screws
3-22 Probe batter cover
3-23 Probe Tripod Fix Nut
3-24 Probe power type c socket
7

4. MEASURING PROCEDURE
4-1 Hygro-Thermometer measurment
1) Pressing the " Power Button "( 3-2, Fig. 1 )
> 2 seconds Turn on the meter.
* Pressing the " Power Button " ( 3-2, Fig. 1 )
continuously and > 2 seconds again will turn off the meter.
2) Turn on the humidity Probe by pressing the " Power Button "(3-2, Fig.1) .
*Short press " Power Button " Turn on the humidity probe ,
the auto power off (about 10 minitu) function will enable.
*long press " Power Button " Turn on the humidity probe
the auto power off function will disable
3) The meter screen will show waiting probe word and
wait a morment the meter will show mesurement value.
Remark :
when screen keep appearing "waiting probe" word ,Please check
probe power ,or press meter" HOLD " key > 2 second or press
" SET " key > 2 second to do Around divice scan and divice pairing ,
wait a morment the screen will display the discovered devices, then
select correct divice and press " ENTER " key , wait a morment the
meter will link the divice and screen will show measure value.
Pressing the " Function Button " ( 3-6, Fig. 1 ) continuously
( not release the button ), the Display will show the
following text in sequence :
(RH+Temp+DEW+WET)---> (RH+Temp)--->
8

4-2 Change the temperature unit (
℃
,
℉
)
How to change the Temperature unit, select to the Humidity
and Temperature measurement function only,then press the
"Unit Button " ( 3-5 Fig.1) continuously,the unit will change from
"
℃
" to "
℉
" sequence, until the desired unit is present on the
Display release the " Unit Button ", the select unit will save into
the memory with default.
4-3 Data Hold
During the measurement, press the " Hold Button " ( 3-3,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will release the data
hold function.
4-4 Data Record ( Max., Min. reading )
1) The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-4,
Fig.1 ) once to start the Data Record function and there
will be a " REC " symbol on the display.
2) With the " REC " symbol on the display :
a) Press the " REC Button " ( 3-4, Fig. 1 ) once, the
" REC MAX " symbol along with the maximum value
will appear on the display.
b) Press the " REC Button " ( 3-4, Fig. 1 ) again, the
" REC MIN " symbol along with the minimum value
will appear on the display.
c) To exit the memory record function, just press the
" REC " button for > 2 seconds at least. The display will
revert to the current reading.
9

4-5 LCD brightness select
Depending on the brightness of the environment,
can use the "Backlight Button " ( 3-2, Fig. 1 ) select from
3rd-order LCD Backlight brightness.
10

5. DATALOGGER
5-1 Preparation before execute datalogger function
a. Insert the SD card
Prepare a " SD memory card " ( 4 G to 16 G, optional ),
insert the SD card into the " SD card socket " ( 3-9, Fig. 1).
The front panel of the SD card should face against the
down case.
b. SD card Format
If SD card just the first time use into the meter, it
recommend to make the " SD card Format " at first. ,
please refer chapter 7-1 ( page 17 ).
c. Time setting
If the meter is used at first time, it should to adjust the
clock time exactly, please refer chapter 7-2 ( page 17 ).
d. Decimal format setting
The numerical data structure of SD card is
default used the " . " as the decimal, for
example "20.6" "1000.53" . But in certain
countries ( Europe ...) is used the " , " as the
decimal point, for example " 20, 6 "
"1000,53". Under such situation, it should
change the Decimal character at first, details
of setting the Decimal point, refer to Chapter
7-6, page 19.
11

5-2 Auto Datalogger ( Set sampling time ≧ 1 second )
a. Start the datalogger
Press the " LoggerButton ( 3-8, Fig. 1 ) > 2 Sec. , the LCD will
show the text " LOGGER ", and flashing , at the same time
the measuring data along the time information will be
saved into the memory circuit.
Remark :
* How to set the sampling time, refer to Chapter 7-3,
page 19.
* How to set the beeper sound is enable, refer to
Chapter 7-5, page 19.
b. Pause the datalogger
During execute the Datalogger function , if press the
" Logger Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the text of " LOGGER " will stop flashing.
Remark :
If press the " Logger Button " ( 3-8, Fig. 1 ) once again
will execute the Datalogger again, the text of " LOGGER " will
flashing .
c. Finish the Datalogger
During pause the Datalogger, press the " Logger Button " (
3-8, Fig. 1) continuously at least two seconds, the " Logger "
indication will be disappeared and finish the Datalogger.
12

5-3 Manual Datalogger ( Set sampling time = 0
second )
a. Set sampling time is to 0 second
Press the " Logger Button ( 3-8, Fig. 1 ) >2 Sec. , the LCD will
show the text " Logger ", then press the " Logger Button " (
3-8, Fig. 1 ) once, the " LOGGER " will flashing once and Beeper
will sound once, at the same time the measuring data
along the time information will be saved into the
memory circuit. The lower Display will show the
Position ( Location ) no. and saved into the SD card too.
Remark :
During execute the Manual Datalogger,
It can use the "
▲
Button " ( 3-5, Fig. 1) or "
▼
Button " ( 3-6, Fig. 1 ) to set the measuring position
(1 to 99, for example room 1 to room 99 ) to identify the
measurement location , the lower Display will show P x
( x = 1 to 99 ).
b. Finish the Datalogger
Press the " Logger Button " ( 3-8, Fig. 1) continuously at
least two seconds, the " Logger " indication will be
disappeared and finish the Datalogger.
5-4 Check time & Sample information & connected probe number
During the normal measurement ( not execute the
Datalogger ), short press " Time Button " ( 3-7, Fig. 1
) once , the TFT LCD display will present the time
information of Year, Month/Date, Hour/Minute & Sampling
time & connected probe number information .
13

5-5 SD Card Data structure
1) When the SD card is used into the meter, the SD card
When the first time, the SD card is used into the meter,
the SD card will generate a folder :
HRA01
2)
If the first time to execute the Datalogger,
under the route HRA01\, will generate a new
file name HRA01001.XLS.
After exist the Datalogger, then execute again,
the data will save to the HRA01001.XLS until
Data row reach to 30,000 rows, then
will generate a new file, for example HRA01002.XLS
3)
Under the folder HRA01\, if the total files more
than 99 files, will generate a new route, such as
HRA02\ ........
4)
The file's route structure :
HRA01\
HRA01001.XLS
HRA01002.XLS
.....................
HRA01099.XLS
HRA02\
HRA02001.XLS
HRA02002.XLS
.....................
HRA02099.XLS
HRAXX\
.....................
Remark : XX : Max. value is 10.
14

6. Saving data from the SD card
to the computer ( EXCEL software )
1) After execute the Data Logger function, take away the
SD card out from the " SD card socket " ( 3-9, Fig. 1 ).
2) Plug in the SD card into the Computer's SD card slot
( if your computer build in this installation ) or
insert the SD card into the " SD card adapter ". then
connect the " SD card adapter " into the computer.
3) Power ON the computer and run the " EXCEL software ".
Down load the saving data file ( for example the file
name : HRA01001.XLS, HRA01002.XLS ) from the SD
card to the computer. The saving data will present into
the EXCEL software screen ( for example as following
EXCEL data screens ) , then user can use those EXCEL
data to make the further Data or Graphic analysis
usefully.
EXCEL data screen ( for example )
15

EXCEL graphic screen ( for example )
7. ADVANCED SETTING
Under do not execute the Datalogger function,
press the " SET Button " ( 3-7, Fig. 1 ) continuously at
least two seconds will enter the " Advanced Setting " mode.
then press the "
▲
(3-5, Fig. 1 )"
or "
▼
(3-6, Fig. 1 ) "
key ,to select
will chang setting mode (text will turn yellow color),in sequence to
select the eight main function, as follows:
SD FORMAT SD memory card Format
CLOCK TIME Set clock time ( Year/Month/Date, Hour/
Minute/Second )
SAMPLE TIME Set sampling time (Second )
AUTO POWER OFF Auto power OFF management
BEEPER SOUND Set beeper sound ON/OFF
DECIMAL POINT Set SD card Decimal character
PROBE PARRING Select correct device to do parring
ESCAE SETTING Escape setting function
16

Remark :
During execute the " Advanced Setting " function,if press
" Power Button " ( 3-2, Fig. 1 ) once will exit the
" Advanced Setting " function, the LCD will
return to normal screen.
7-1 SD memory card Format
1)
Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) select to " SD CARD FORMAT " position
then press " ENTER " key.
2)
Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button " (
3-6, Fig. 1 ) to select the display text to " YES " or " NO ".
YES - Intend to format the SD memory card
NO - Not execute the SD memory card format
3) If select the upper to " yES ", press the " Enter Button
" ( 3-8, Fig. 1 ) once again, the Display will show text
" SURE " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
7-2 Set clock time ( Year/Month/Date,Hour/Minute/ Second )
1)
Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) select to " CLOCK DATA TIME " position
then press " ENTER " key.
2) Press the " Enter Button " ( 3-8, Fig. 1 ) once, Use the
"
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button " ( 3-6, Fig. 1 )
to adjust the value ( Setting start from Year value ).
After the desired value is set, press the " Time Button "
( 3-7, Fig. 1 ) once will going to next value adjustment
( for example, first setting value is Year then next to adjust
Month, Date, Hour,Minute, Second value ).
3) After set all the time value ( Year, Month, Date, Hour,
Minute, Second ), press the " ENTER Button " ( 3-8, Fig. 1 )
once ,will save and Back to " Advanced Setting screen
"
.
17

Remark :
After the time value is setting, the internal clock will
run precisely even Power off if the battery is under
normal condition ( No low battery power ).
7-
3 Set sampling time ( SecondS )
1)
Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) select to " SAMPLI TIME " position
then press " ENTER " key.
2)
Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button " (
3-6, Fig. 1 ) to adjust the value ( 1, 2, 5, 10, 30,60,
120, 300, 600, 1800,3600 seconds ).
3) After the Sampling value is selected, press the "
Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default
and Back to " Advanced Setting screen ".
7-4 Auto power OFF
1)
Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) select to " AUTO POWER OFF " position
then press " ENTER " key.
2)
Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) to select the display text to " YES " or " NO ".
YES - Auto Power Off management will enable.
NO - Auto Power Off management will disable.
3) After select the upper text to " YES " or " NO ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default and Back to " Advanced Setting screen ".
18