LuxenHome WHPL1273 User manual

WHPL1273
L-shaped Galvanized Raised Garden Bed
PREPARATION
SAFETY INFORMATION
Before assembling product, make sure all parts are present. Compare parts with
package contents list and hardware contents below. If any part is missing or damaged,
do not attempt to assemble the product.
Tighten all the screws before using.
This planter is intended for outdoor use only. The floor may be wet when watering
the plant.
Not for use by children. Keep children and pets away from the planter.
It’s suggested to wear gloves when assembling product.
Tools required for assembly (included):Allen key

A
B
C
Part QuantityDescription
5
1
2
HI
HARDWARE CONTENTS
PACKAGE CONTENTS
Frame A
Frame B
Shortest panel
Short panel
reinforcement stick
Long panel
(with the top hole on the left of center)
Long panel
(with the top hole on the right of center)
J
A
D
E
F
G
2
1
1
2
A
A
A
A
B
C
C
DD
EF
G
50 PCS
Bolt Nut Allen key
50 PCS 1 PC

1
2
Hardware Used:
Bolt
x16H
Nut
I x16
Hardware Used:
Bolt
x16H
Nut
I x16
Align the holes on the Frame A with the holes on the shortest panel (C) and short panel (D). Attach the frame and
panels with bolts (H) and nuts (I).
Align the holes on another Frame A with the holes on the shortest panel (C) and long panel (E) Attach the frame and
panels with bolts (H) and nuts (I).
Do the same way to the shortest panel (C), short panel (D) and long panel (F).
A
C
Hx16
E
D
A
C
Hx16
F
D
A
A
ASSEMBCY INSTRUCTION

Attach above two parts with Frame A, Frame B, bolts (H) and nuts (I).
Attach the reinforcement sticks (G) on the top of short panels (D) and long panels (E/F) with bolts (H) and nuts (I).
3
Hardware Used:
Bolt
x14 x14H
Nut
I
Hardware Used:
Bolt
x4 x4H
Nut
I
4
Hx8
Ix8
Ix6
Hx6
B
A
E
F
Hx2
H
H
I
G
G