LuxenHome WHPL1605 User manual

PREPARATION
Before assembling product, make sure all parts are present. Compare parts with
package contents list and hardware contents below. If any part is missing or
damaged, do not attempt to assemble the product.
Tools required for assembly (included): Allen key , Spanner
SAFETY INFORMATION
Tighten all the screws before using.
This planter is intended for outdoor use only. The floor may be wet when watering
the plant.
Not for use by children. Keep children and pets away from the planter.
Metal Rectangular Raised Garden Planter with Casters
It’s suggested to wear gloves when assembling product.
WHPL1605
Thank you for your purchase of our LuxenHome product. This product is manufactured with the highest
standards of safety and quality.

A
A
B
B
C
D
D
E
F
Part Description Quantity
A
B
C
D
E
F
G
H
I
J
HARDWARE CONTENTS
K
P
Long panel
Short panel
Long stand leg
Short stand leg
Bottom panel
Iron frame
Handle
Caster connector
Caster
Caster cap
Plastic leg cover
Plastic corner cover
2
2
2
2
1
1
1
1
2
2
2
4
L M N O Q R
M6x12MM Screw
8PCS
M6x15MM
4PCS
Screw Nut
12PCS
Pin
2PCS
Spanner
1PC
Allen key
1PC
K
G
H
I
J
IJ
P
Metal Rectangular Raised Garden Planter with Casters
WHPL1605

CK
1
2
Make sure the plastic leg cover (K) are well attached to all long stand legs (C).
Upside down the panels when assembling. Place long panel (A). and short panel (B) as
picture (1) shown. Make sure (B) is on top of (A) as picture (2) shown.
B
A
A
B
(1)
(2)
Metal Rectangular Raised Garden Planter with Casters
WHPL1605

3
D
A
B
L
N
L
AD
L
N
Attach short stand legs (D) to (B) and (A) with screws (L) and nuts (N).
4Attach long stand legs (C) and handle (G) to (B) and (A) with screws (L) and nuts (N).
A
A
D
C
C
G
BL
N
L
Hardware used:
L
N
x4
x4
Screw
Nut
N
N
Hardware used: LN
x4 x4
Screw Nut
Metal Rectangular Raised Garden Planter with Casters
WHPL1605

5Attach the iron fame (F) with screws (M) and nuts (N).
M
N
M
N
NN
F
I
H
I
6Insert the caster connector (H) through the holes of short stand legs (D).
Put the casters (I) to both ends.
DD
Hardware used:
M
N
x4
x4
Screw
Nut
Metal Rectangular Raised Garden Planter with Casters
WHPL1605

7Insert the pins into the holes of the caster connector, and bend one of the legs of the pin.
Cover the caster (I) with caster cap (J).
I
O
O
H
J
8Turn upright the planter, place bottom panel (E) into the planter.
Attach plastic corner covers (P) to 4 planter corners.
E
P
P
Hardware used:
Ox2
Pin
Metal Rectangular Raised Garden Planter with Casters
WHPL1605