Luxonic LED-EM HIGH BAY User manual

3.
1. Surface Mount option. Suspended option.
2A.
2B.
6.
4.
5.
NOT TO SCALE
Please ensure all onsite health & safety regulations are observed.
All electrical work should be carried out by qualified personnel only.
The electricity supply should be disconnected before any electrical
work is undertaken.
These products should not be exposed to liquids or the elements.
Suspension wire / gripple to be supplied by
the user.
Health & Safety Suspension Option
L W H Kg.
Catalogue Prefix.
LED-EM 1.8
170 50170
LED-EM (Wireless) 2.2
250 42.5210
For wattages & additional information, please see website.
L
H
W
Unscrew M4 (x4) &
remove lid.
Wireless luminaire
fixing dimensions.
Fix to ceiling (fixing screws
not supplied).
Fixing scews through
dimple as shown.
Mains Feed
194.5mm
162mm
119mm
Connect battery.
For Wiring Config and
Regulations, please turn over.
Replace lid and fasten
with screws.
Illustration purposes
For surface mounted option only.
Thread through
points shown.
Thread suspension wire
through dimples (x4).
Connect luminaire
to mains.
LEN
Stripped Back
Lead: 9mm
220~240V
50/60 Hz
Max Core Dia:
1.5mm
Installation procedure of emergency luminaire:
•The battery connections must be left disconnected
during installation unless uninterrupted mains supply
to the luminaire is guaranteed.
•Cycling of the permanent mains supply other than
necessary to perform Emergency duration and function
test is prohibited as it may cause damage to the battery
•Correct commissioning procedure must be followed,
Please refer to the Luxonic Website for more details¹.
Luminaire fixing dimensions.
150mm
130mm
65mm
6mm
Mains Feed
LED-EM HIGH BAY
Installation Instructions

1. An initial uninterrupted minimum charge period of 24hrs
2. Discharge for 3hrs
3. Uninterrupted charge period of 24hrs
4. Test the fitting for its rated duration
¹Commissioning procedure for Non Self-test Emergency luminaires
For non-user replaceable light sources:
“The light source contained in this luminaire shall only
be replaced by the manufacturer or their zservice
agent or a similar qualified person.”
IP20
Dali 2
Dali 1
Earth
Permanent Live
Neutral
Live
Purpose Wireless 3NMI 3NMIET 3NMID
Fixed Output
x x x
x x x
Wiring Config.
5 core terminal block comes as standard.
Live linked to Permanent live within luminaire.
x x x