C x4
Pullout Keyboard Shelf Instructions
for Metal Carts
-Phillips Screwdriver
-Pliers or Adjustable Wrench
(Back)
(Front)
FR
FL
C
C
A
A
FR
FL
H
FL,
FR, A& C. Push Screw Athrough the hole at the top of the shelf.
Lay bracket FL &FR on top of screw A. Take nut Cand fasten with a
screwdriver and pliers, do not tighten fully until shelf is attached.
Collect parts: H. Align the pullout shelf Hrunner so that the runner
snaps into place into the FL & FR brackets. Pull the shelf out to
make sure it is fully seated. Tighten screws Aand nut C. Pullout
keyboard shelf assembly is now complete.
www.luxorfurn.com
09/05/17
Tools Required
Parts List
H x1
FL x1
FR x1
A x4
