Lynk 421121 User manual

Set drawer onto glide frame with holes
in drawer and glide aligned
Check for adequate cabinet and
door clearance
Adjust glide frame position if needed
4 Mounting
holes
Check Cabinet Clearance
As shown using alignment guide
found in parts bag
2 ” min.
50.8mm
Alignment
Guide
2.5”min.
63.5mm
2 ” min.
50.8mm
Make sure arrows
are pointing to the
front of the cabinet
20” Drawers require
more side clearance
4”min.
101.6mm
Align Glide Frame
4
Using #1 small wood screws and brackets
Do not over tighten
Attach Wood Front
3
Small Wood Screw (4)
#1
Bracket (2)
Align Wood At Front of Drawer
2
5
Front
Holes (4)
No
packing
materials
Glide
Frame Drawer
Front
Front
Wood
Floor
Parts
Bag
Wood Front
Unpack
1
#2
#3
Small Wood Screw (4)
#1
Bracket (2)
Instructions
Alignment Guide
Large Wood Screw (4)
Mounting Screw (4)
Discard
8places
Discard
4places
© 2019 Lynk, Inc. 8241 Melrose Dr. Lenexa, KS 66214
#421121DS – #421421DS – #421721DS – #422021DS Roll Out Wood R1 1
Roll Out Wood Drawers

Set drawer onto glide frame with drawer and
glide mounting holes aligned
Attach Drawer
Insert Wood Floor
7
8
Turn screws
until just snug
#3Mounting Screw (4)
Install front
screws first
Recommended:
Use of a Power Screwdriver
Drill 4 starter holes using a
1/8” diameter drill bit
For 17” and 20” drawers
Use holes nearest to
glide rails (as shown)
Move inner
glide rails
forward
Optional for 20”drawers:
Use 2 extra screws in back
Remove drawer from glide frame
Move inner glide rails slightly forward as shown
Mount glide frame into cabinet using
#2 large wood screws found in parts bag
Mount Glide Frame
6
#2Large Wood Screw (4)
LIMITED WARRANTY AND DISCLAIMER OF LIABILITY
The manufacturer warrants this product against defects in manufacturing and workmanship for a period of ninety (90) days from the date of purchase. For questions, call
[phone] for customer service.
MANUFACTURER DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE WITH REGARD TO THE PRODUCT. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, INJURY TO PERSON OR PROPERTY, OR ANY OTHER INCIDENTAL, CONSEQUENTIAL OR
PECUNIARY LOSS), OR FOR ATTORNEY’S FEES OR COSTS, ARISING OUT OF THE USE OR OPERATION OF THE PRODUCT.
If you have questions, please call 800-733-5965 www.lynkinc.com
© 2019 Lynk, Inc. 8241 Melrose Dr. Lenexa, KS 66214
#421121DS – #421421DS – #421721DS – #422021DS Roll Out Wood R1 1