M-Elec RAPID User manual

Compliant with:
AS/NZS . AS/NZS .. AS/NZS ..
*Suitable for use with .mm2& .mm2C+E ONLY WITH CENTRE
EARTH cables in accordance with AS/NZS .: conductor range.
BEFORE COMMENCING INSTALLATION OR MAINTENANCE, ENSURE ELECTRICITY
IS SWITCHED OFF AT THE MAINS.
For .mm2cable* place
the cable into the channel
and push it down so it’s
completely flat.
For . mm2cable*, remove
the insert in the centre.
Place the cable* into the
channel and push it down so
it is completely flat.
INSTALLATION GUIDE
Turn over for termination and unlocking guide.
ML - BSRC -XC
ML - BSRC - XC - 
OR
UNIVERSAL POLARITY SAFE.
This product is NOT polarity sensitive,
L & N are interchangable.
Align the lid pins with the
channel grooves.
Use a steady firm motion
and slide the cover closed
until you hear a ‘click’ sound.
This indicates the unit is now
installed securley.

OPTIONAL: Fix the rapid
connector into place
using suitable fixing
screws or the cable tie
loops.
OPTIONAL Termination guide for rapid connector.
Strip 15mm of the outer
cable* insulation
exposing the inner
insulated wires.
Insert active, earth and
neutral insulated cables*
into the slots on the
terminator block.
Clip the terminator block
in the top end of the
channel ensuring the
cable* is siing flat in the
channel.
Place the cover on top of the
main body and press the
pins firmly into the channel
grooves. Slide lid forwards
as per step 5.
OPTIONAL Unlocking guide.
Insert a small flat bladed
screwdriver into position
A and li slightly.
Slide the cover back until
you can remove it
completely.
A
15mm
Using the XC connector
flex, plug in the XC
connector to the LED
driver. The XC connector
may be inserted either
way as it has universal
polarity.
ML - BSRC -XC
ML - BSRC - XC - 
1
3
YEAR WARRANTY