EN
10
• Insert the SIM card into the SIM card slot lightly with the corner cutting of the card
aligning to the notch of the slot and the gold plate of the card facing download, till the
SIM card cannot be further pushed in.
• Aim the positive pole and negative pole of the battery at the battery connector of
the mobile phone, and press the left of the battery to install the battery into the bat-
tery tank.
Using code
The mobile phone and the SIM cards support sorts of passwords, in order to prevent
the phone and the SIM cards from being misused. When you are prompted to input
any of the codes mentioned below, just input the correct code and then press the OK
key. If you input a wrong code, press the Right soft key to clear it and then input the
correct code. To modify the PIN, PIN2, and/or phone lock code, choose Settings >
Security setup > Change password.
Phone lock code
The phone lock code may be set to prevent your mobile phone from being misused.
In general, this code is provided along with the mobile phone by the manufacturer.
The initial phone lock code is set to 0000 by the manufacturer. If the phone lock code
is set, you need to input the phone lock code when powering on the mobile phone.
