Macma SJ23060 User manual

Instructions for Stone Cutting Machine
For your own safety, read all instructions carefully
Before using this machine
3HP 2800rpm IP55 (300x25.4)
350x25.4
L=600
B=85(165) 500x510 0°or 45° 600lt/h
L=1145
B=695
H=500
77/97
3HP 2800rpm IP55 (300x25.4)
350x25.4
L=800
B=85(175) 1050x580 0°-45° 600lt/h
L=1270
B=786
H=735
112/142
+3
+3
2800rpm IP55 L=1000
% 1250x580 0°-45° 600lt/h
L=1470
B=786
H=735
127/157
2800rpm IP55 (300x25.4)
350x25.4
(300x25.4)
350x25.4
L=1200
% 1450x580 0°-45° 600lt/h
L=1670
B=786
H=735
137/172
Kg.
Technical data
Please Read First
WARNING!
When using electric tools basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and personal injury including the
following.
Read these instructions before attempting to operate
this product and save these instructions.
If you notice transport damage while unpacking, notify
your supplier immediately. Do not operate the saw!
Dispose of the packing in an environmentally friendly
manner. Take to a proper collecting point.
Keep these instructions for reference on any issues
you may be uncertain about.
General safety instructions
1. Keep work area clear
- Cluttered areas invite injuries.
2. Consider work area environment
- Do not expose tools rain.
- Do not use tools in damp or wet locations.
- Keep work area well lit.
- Do not use tools in the presence of flammable liquids
of gases.
3. Guard against electric shock
- Avoid body contact with earthed or grounded
surfaces. (e.g. pipes, radiators, ranges,
refrigerators).
4. Keep other persons away,
- Do not let persons, especially children, not involved
in the work touch the tool or the extension cord and
keep them away from the work area.
5. Store idle tools
- When not in use, tools should be stored in a dry
locked up place. Out of reach of children.
6. Do not force the tool
- It will do the job better and safer at the rate for
when it was intended.
7. Use the right tool
- Do not force small tools to do the job of a heavy duty
tool.
- Do not use tools for purposes not intended.
8. Dress properly
- Do not wear loose clothing or jewellery, they can be
caught in moving parts.
- Non-skid footwear is recommended.
- Wear protective hair covering to contain long hair.
9. Use protective equipment
- Use safety glasses.
- Use face or dust mask if working operations create
dust.
10. Do not abuse the cord
- Never yank the cord to disconnect it from the socket.
Keep the cord away from heat, oil and sharp edges.
11. Do not overreach
- Keep proper footing and balance at all times.
12. Maintain tools with care
- Keep cutting tools sharp and clean for better and
safer performance.
- Follow instructions for lubricating and changing
accessories.
- Inspect tool cords periodically and if damaged have
them repaired by an authorized service facility.
- Inspect extension cords periodically and replace if
damaged.
- Keep handles dry, clean and free from oil and grease.
13. Disconnect tools
- When not in use, before servicing and when changing
-1-
SJ23060
SJ23080
SJ23100
SJ23120

accessories such as blades, bits and cutters,
disconnect tools from the power supply.
14. Remove adjusting keys and wrenches
- Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool before
turning it on.
15. Avoid unintentional starting
- Ensure switch is in "off" position when plugging in.
16. Use outdoor extension leads
- When the tool is used outdoors, use only extension
cords intended for outdoor use and so marked.
17. Stay alert
- Watch what you are doing use common sense and
do not operate the tool when you are tired.
18. Check damaged parts
- Before further use of tool, it should be carefully
checked to determine that it will operate properly
and perform its intended function.
- Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting and any
other conditions that may affect its operation.
- A guard or other part that is damaged should be
properly repaired or placed by an authorized service
center unless otherwise indicated in this instruction
manual.
- Have defectives switches replaced by an authorized
service center.
- Do not use the tool if the switch does no turn it on
and off.
19. Warning
- The use of any accessory or attachment other than
one recommended in this instruction manual may
present a risk of personal injury.
- Use only saw blades for which the maximum
possible speed is not less than the maximum spindle
speed of the tool and the tool and the material to be
cut.
- When transporting the machine use only transpor-
tation devices and do never use guards for handling
or transportation.
- Do not use saw blades which are damaged or
deformed.
- Wear respiratory protection to reduce the risk of
inhalation of harmful dust.
20. Have your tool repaired by a qualified person.
This electric tool complies with the relevant safety
rules. Repairs should only be carried out by qualified
persons using original spare parts, otherwise this
may result in considerable danger to the user.
8QSDFNLQJ
1RWH
0DNHVXUHDOOLWHPVDUHDFFRXQWHGIRUEHIRUHGLVFDUGLQJ
DQ\SDFNDJLQJPDWHULDO
:DUQLQJ
7RDYRLGLQMXU\LIDQ\SDUWVDUHPLVVLQJGRQRWDWWHPSW
WRDVVHPEOHWKHPDFKLQHGRQRWSOXJLQWKHSRZHUFRUG
GRQRWWXUQWKHVZLWFKRQXQWLOPLVVLQJSDUWVDUH
REWDLQHGDQGLQVWDOOHGFRUUHFWO\
,QVWDOODWLRQ
:DUQLQJ
'RQRWOLIWWKHVDZZLWKRXWKHOS
7KHVDZLVWRRKHDY\WROLIWZLWKRXWKHOSFXVWRPHUV
VKRXOGVHHNDVVLVWDQFHIURPVWDIIWROLIWWKLVPDFKLQH
$IWHUXQSDFNLQJLQVWDOODOOWKHORRVHQSDUWVRQWKHPDLQ
ERG\LQDFFRUGLQJWRWKHH[SORVLRQGUDZLQJRQWKH
PDQXDO0DNHVXUHDOOWKHORRVHQSDUWVFRUUHFWO\
LQVWDOOHG
1RWH
7RSRUWDEO\WXUQWKHKHDGDVVHPEO\IRUEHYHOFXWWLQJ
LQVWHDGRIWZRKH[VFUHZVRQWZRVXSSRUWEUDFNHWV
PRGHORURQXSGRZQIUDPH
PRGHOE\WZRUDWFKHWOHYHUV0[LQ
EDJRIORRVHQSDUWV
5HSODFLQJWKH6DZ%ODGH'LVF
:DUQLQJ
0DNHVXUHWKHVZLWFKLVRIIDQG\RXUVDZLVXQSOXJJHG
LQSRZHUVXSSO\)DLOXUHWRGRVRFRXOGUHVXOWLQVHULRXV
SHUVRQDOLQMXU\
&KHFNWKHDQJOHRIVDZEODGHZLWKWKHZRUNWDEOHE\
DFRPELQDWLRQVTXDUHLIWKHVDZEODGHLQQRWZLWK
WKHZRUNWDEOHORRVHQWKHWZRUDWFKHWOHYHURQ
VXSSRUWEUDFNHWWRDGMXVW
)L[WKHZRUNSLHFHRQWDEOHWKHHQGRIZRUNSLHFHLV
DJDLQVWWKHJXLGHEUDFNHWWKHVLGHRIZRUNSLHFH
DJDLQVWWKHJXLGHERDUG
3OXJWKHSRZHUFDEOHVIRUPDLQPDFKLQHDQGODVHU
JXLGHWRSRZHUVXSSO\
7XUQWKHKDQGZKHHOWRVHWGHSWKRIFXW
7RVWUDLJKWO\FXWWKHZRUNSLHFHFKHFNWKHODVHUJXLGH
PDNHVXUHWKHODVHUJXLGHZLWKVDZEODGHLQDOLQH
7XUQWKHVZLWFKRQFKHFNWKHZDWHUVXSSO\LI
QHFHVVDU\DGMXVWWKHZDWHUFRFNRQWKHXSSHURIEODGH
JXDUG0DNHVXUHWKHZDWHULVVSUD\HGRQWKHWZR
VLGHVRIVDZEODGH
3XOOWKHKHDGKDQGOHEDFNZDUGWRZRUNSLHFHIRU
FXWWLQJPRGHO
3XVKWKHZRUNWDEOHIRUZDUGIRUFXWWLQJ0RGHO
-2- -3-
/RRVHQVFUHZVRQEODGHJXDUGDQGUHPRYHWKHEODGH
JXDUG
,QVHUWDVWHHOEDURUDVFUHZGULYHULQWRWKHKROHRQ
VKDIWDQGORRVHWKHPPEODGHQXWZLWKPP
VSDQQHUUHPRYHWKHEODGHQXWDQGEODGHIODQJH
&DUHIXOO\UHPRYHWKHZRUQEODGHGLVF
3ODFHQHZEODGHGLVFRQWRWKHVDZDUERUVKDIWDQG
VXUHWKHGLVFURWDWLRQGLUHFWLRQPXVWEHFORFNZLVH
3ODFHWKHEODGHIODQJHDQGEODGHQXWRQWRVDZDUERU
VKDIW7KHQLQVHUWDVFUHZGULYHULQWRWKHVKDIWKROH
DQGWLJKWHQWKHEODGHQXWZLWKPPVSDQQHU
5HLQVWDOOWKHEODGHJXDUG
&KHFNWKHVSDFHUEHWZHHQWKHEODGHJXDUGDQG
EODGH.HHSWKHEODGHIUHHIURPEODGHJXDUG$QG
NHHSWKHZDWHUWXEHIUHHIURPEODGHGLVF
7LJKWHQWKHVFUHZVRQEODGHJXDUGDQGDOZD\VKDYH
EODGHJXDUGLQVWDOOHGGXULQJRSHUDWLRQ
2SHUDWLRQ
&XWWLQJ
)LOOWKHWDQNZLWKZDWHUDQGNHHSWKHZDWHUSXPSVXQN
LQWRZDWHU
)LJ )LJ
,QVWDOOLQJVXSSRUWOHJV
)LJ
)LJ
5HSODFLQJWKHVDZEODGH
FXWWLQJ
O
O
O

O
OO
O
%HYHOFXWWLQJ
7KHKHDGDVVHPEO\FDQEHWLOWHGIURPWRIRU
EHYHOFXWWLQJPRGHO
/RRVHQWZRUDWFKHWOHYHUVRQVXSSRUWEUDFNHWVWXUQ
WKHKHDGWRGHVLUHGDQJOH7KHQUHWLJKWHQWZRUDWFKHW
OHYHUVPRGHO
7KHKHDGDVVHPEO\FDQEHWXUQHGWRIRUEHYHO
FXWWLQJPRGHO
/RRVHQWZRUDWFKHWOHYHUVRQWKHXSGRZQIUDPH
WXUQWKHKHDGDVVHPEO\GHJUHHV7KHQUHWLJKWHQ
WZRUDWFKHWOHYHUVPRGHO
7KHQSHUIRUPDQFHWKHFXWWLQJDVQRUPDOFXW
&DXWLRQ
'RQRWRYHUIRUFHWKHZRUNSLHFHRWKHUZLVHPD\
FDXVHWKHEODGHGLVFRYHUKHDW
:KHQFXWDORQJRUWKLFNZRUNSLHFHWKHEODGHGLVF
PXVWEDFNZDUGWRDYRLGRYHUKHDWPRUHWLPHV
:KHQFXWWLQJPXVWNHHSWKHZRUNSLHFHVWDEO\DQG
DYRLGVOLGLQJ
)LJ
)LJ
%HYHOFXWWLQJ
5LVNRINLFNEDFN
'RQRWDWWHPSWWRVWRSWKHVDZEODGHE\SXVKLQJWKH
ZRUNSLHFHDJDLQVWLWVVLGH
1HYHUFXWVHYHUDOZRUNSLHFHVDWWKHVDPHWLPHDQG
DOVRQREXQGOHVFRQWDLQLQJVHYHUDOLQGLYLGXDOSLHFHV
5LVNRISHUVRQDOLQMXU\LILQGLYLGXDOSLHFHVDUHFDXJKWE\
WKHVDZEODGHXQFRQWUROOHG
7XUQRIIWKHVDZZKHQ\RXILQLVKRQHWLPHRIFXWWLQJ
0DNHVXUHWKHVDZLVWXUQHGRIIDQGGLVFRQQHFWHG
IURPSRZHUVXSSO\ZKHQ\RXOHDYHWKHVDZ
0DLQWHQDQFH
%HIRUHVZLWFKRQ
9LVXDOFKHFNLIGLVWDQFHEODGHGLVFEODGH
JXDUGLVPP
9LVXDOFKHFNRISRZHUFDEOHDQGSRZHUFDEOH
SOXJIRUGDPDJH
'DLO\
:DUQLQJ
'RQWGURSWKHZDWHURQWRWKHPRWRUDQGVZLWFK
0DNHVXUHWKHVDZLVWXUQHGRIIDQGGLVFRQ
QHFWHGIURPSRZHUVXSSO\EHIRUHFOHDQWKHVDZ
&OHDQWDEOHWDQNZLWKEUXVKRUVRIWGDPSFORWK
'U\WKHZDWHUWDQNZLWKVRIWGDPSFORWKRUIRDP
DIWHUGDLU\RSHUDWLRQ
&OHDQWKHZDWHUSXPSZLWKVSULQNOHUGRQW
GLVPDQWOHWKHZDWHUSXPS
0RQWKO\
$SSO\DOLJKWFRDWRIRLOWRJXLGHHOHPHQWXS
GRZQIUDPHURWDWLQJIUDPHJXLGHUDLOXSGRZQ
WKUHDGUDLODQGVZLYHOHOHPHQWVHWF
7URXEOH6KRXWLQJ*XLGH
:DUQLQJ
%HIRUHFDUU\LQJRXWDQ\IDXOWVHUYLFHRUPDLQWHQDQFH
ZRUNDOZD\V
6ZLWFKPDFKLQH2))
8QSOXJSRZHUFDEOH
:DLWIRUVDZWDEOHWRFRPHWRVWDQGVWLOO
0RWRULVVORZRUZHDN
9ROWDJHIURPVRXUFHLVORZ
5HTXHVWDYROWDJHFKHFNIURPORFDOSRZHU
FRPSDQ\
:LQGLQJVDUHEXUQHGRXWRURSHQ
+DYHWKH0RWRUFKHFNHGUHSDLUHG
3RZHU6ZLWFKLVGHIHFWLYH
+DYHWKH3RZHU6ZLWFKUHSODFHG
0RWRURYHUKHDWV
0RWRULVRYHUORDGHG
5HTXHVWDYROWDJHFKHFNIURPWKHORFDOSRZHU
FRPSDQ\
'XOOVDZEODGH
5HSODFHWKHVDZEODGH
7KHPDFKLQHLVYLEUDWLYHZKHQFXWWLQJ
7KHGLUHFWLRQRIVDZEODGHUXQLQJLVDQWLFORFNZLVH
.HHSWKHGLUHFWLRQRIVDZEODGHUXQQLQJFORFNZLVH
7KHKDQGOHVIRUDGMXVWLQJFXWWLQJGHSWKRUEHYHOFXWWLQJ
LVORRVHQ
7LJKWHQWKHKDQGOHVIRUDGMXVWLQJFXWWLQJGHSWKRU
EHYHOFXWWLQJ
%RUHGLDPHWHURIVDZEODGHLVXQPDWFKHGZLWKWKH
GLDPHWHURIPRWRUD[LV
5HSODFHWKHVDZEODGH
7UDFNRIEODGHFXWWLQJLVGHIOHFWLYH
7KHVDZEODGHLVEHQWEURNHQRUGLUW
5HSODFHRUFOHDQWKHVDZEODGH
7KHODVHUJXLGHLVGHIOHFWLYH
$GMXVWWKHODVHUJXLGH

/DVHUER[
&URVVSDQKHDGVFUHZ0[
6SULQJZDVKHU
&URVVSDQKHDGVFUHZ0[
7UDQVIRUPHUER[
&RYHUODVHUER[
PRXQW

.QRE
+DQGZKHHO
/DUJHZDVKHUPP
:DWHUSXPS
%XVK
%ODGHJXLGHOHIW
&URVVUHFHVVHGSDQKHDGVFUHZ0[
)ODWZDVKHUPP
)ODWZDVKHUPP
+H[DJRQVRFNHWVHWF\OLQGHUKHDGVFUHZ0[
8SGRZQIUDPH
7KUHDGVKDIW
6TXDUHQHFNHGEROW0[
+H[DJRQVRFNHWVHWF\OLQGHUKHDGVFUHZ0[
+H[DJRQVRFNHWVHWVFUHZZLWKIODWSRLQW0[
+H[DJRQ1XW0
%XVK
%ODGHJXLGHULJKW
+H[DJRQKHDGEROW0[
5XEEHUJXLGHERDUG
6TXDUHQHFNHGEROW0[
&URVV5HFHVVHGSDQKHDGVFUHZ0[
/RZHUFRYHUERDUG
1XW
&RUQHUIHQFH
:DWHUFDVH
5XEEHUERDUG
6LGHJXLGHERDUG
3UHVVERDUG
([WHQVLRQWDEOH
5RXQGKHDGULYHW
7DEOH
5RWDWLQJIUDPH
6OHHYH
6TXDUHQHFNHGEROW0[
9VKDSHZKHHO
)ODWZDVKHUPP
%DOOEHDULQJ
&LUFOLSV
/DUJHZDVKHUPP
+H[DJRQQXW0
6HOIORFNLQJQXW0
+H[DJRQQXW0
6SULQJVHDW
%HQGLQJSODWHIRUWDEOH
6SULQJ
6ORWWHGVHWVFUHZZLWKIODWSRLQW0[
6SULQJDGMXVWLQJFDS
)ORZHUEROW
+H[DJRQKHDGEROW0[
:DWHUFDVHSOXJ
0RWRUPRXQW
+H[DJRQKHDGEROW0[
+H[DJRQKHDGEROW0[
/DUJHZDVKHUPP
6TXDUHQHFNHGEROW0[
6SULQJZDVKHUPP
+H[DJRQQXW0
%ODGH
0RWRU
$QJOH
6WUDLQUHOLHI
*XLGHVHDW
6HDOLQJULQJ
:LQJVKDSHQDLO0[
6ZLWFK
+RVHFRQQHFWRU
%XVK
/DVHUJXLGHPRXQW
+RVH
6SULQJZDVKHU
3DUWOLVW
7UDQVIRUPHUER[
This manual suits for next models
3
Popular Cutter manuals by other brands

Lincoln Electric
Lincoln Electric ESSENTIAL OXYCUTTING Safety instruction for use and maintenance

VEVOR
VEVOR J1G-ZB-355B user manual

Hakko Electronics
Hakko Electronics ft-800 instruction manual

Lightning
Lightning Lightomatic Parts and service manual

Milwaukee
Milwaukee C12 PPC Original instructions

AMTI Products
AMTI Products Slice 141 quick start guide