MacNeil WeatherTech User manual

Instruction Manual
1 MacNeil Ct.
Bolingbrook, IL 60440
630-769-1500 • Fax: [phone]
www.weathertech.com
Patent Requested
WeatherTech
®
Pet Barrier Extension
Pet Barrier Extension
Pet Barrier Extension
NOTES
• This product is not to be used as a
cargo barrier. Any use of this product for
that reason voids warranty and releases
manufacturer of any and all liability.
• It is not always necessary to use the
included vertical tubes. The additional
vertical tubes will add 6 inches to the
height of the Pet Barrier.
• Check the Wing Nuts on the Vertical
Tubes periodically to adjust for settling.

Re-install the
Support Feet
to the top of
the barrier.
Adjust the Hoop
Assemblies
vertically and
horizontally as
necessary for
your application.
3
Remove the
support feet
from the top of
the barrier.
1
• Thank you for purchasing the WeatherTech® Pet Barrier
Extension. We are confident that this product is the best
on the market, and will exceed your needs.
• Please take a moment to familiarize yourself with all of
the included parts listed above. If anything is missing,
contact your dealer immediately.
BEFORE YOU BEGIN
OUR GUARANTEE:
This product is guaranteed against defects in manufacturing for
one (1) year from the date of original purchase.
PARTS LIST
Letter Description Quantity
A Telescoping Hoop Assembly 1
B Plastic Vertical Brackets 2
C Vertical Extension Tubes
2
Parts Included With The
WeatherTech
®
Pet Barrier Extension
YOU WILL NEED:
A phillips-head screwdriver
A
D
C
B
Insert the Vertical
Extension Tubes
(C) onto the two top
ends. Then add the
extra Telescoping
Hoop Assembly to
the Upright Tubes
as shown. Use the
included Screws (D)
to lock the Plastic
Vertical Brackets
(B) in place on the
newly installed
Hoop Assembly (A).
2
Refer to the notes section on the
reverse side of this sheet.