made for movement INNOWALK PRO User manual

INNOWALK PRO
In & out Quick Guide
UNLEASH
POTENTIAL!

TRANSFER THE USER INTO THE INNOWALK PRO
Open all straps. Place Innowalk Pro in sitting
position. Transfer the user into the Innowalk Pro.
It is recommended to use a personal lifter.
1
Place the user well back on the seat.
2
Secure the chest strap.
3
Adjust the leg support to right height and x
the guide-string to the leg support hook.
4
Daily and before the rst user/patient gets into the device a pre-check must be performed.
A pre-check includes visual and functional inspection, to reveal loose parts/screws and damaged belts
and strings.
Check the following parts:
.
! If any part discovered under the Pre-check is broken or visibly damaged, the device should not be used
until parts have been replaced.
• Backrest attachment point
• Chest support
• Chest belt
• Hip support
• Hip belt
• Foot plates and Velcro straps
• Rotating points on the leg support
• Guide-string
• Remote control
• Switches
• Power supply
PRE-CHECK BEFORE USE

Hold on to the guide-string to control
the tension when going from sitting to
standing.
Adjust the hip support.
SUPPORT EQUIPMENT
Attach shoulder straps.
Attach arm-moving handles
for reciprocal movement.
Note: remove the tray rst.
Hand xation gloves may
be used together with
arm-movement handles.
Secure the hip belt.
Start the training session and
adjust the speed to the user´s
needs.
Make sure that the user is standing
and moving in an optimal position.
Innowalk Pro Large: Adjust tension of the guide-string
Innowalk Pro Small: Adjust tension of the guide-string
5
Position the heel towards the back of
the foot plate and secure with straps.
6
Adjust the head support; height and
depth.
7
8
9 10
SHOULDER STRAPS ARM-MOVEMENT HANDLES

Press the quick bolt button under
the bracket.
Attach the tray. Pull down the index bolt and swing
the tray into position.
Adjust the depth of the tray plate. When nished, swing out the tray
and either leave it there or remove
completely. Press the quick bolt
button.
..and at the same time place and lift
with your right hand as close to the
tray bracket as possible. Then use
both hands to remove the tray.
Display for feedback about speed,
distance, and time.
Adjust the cam stop to avoid hyperextension of the user's knees. Clockwise
turning - leg support moves forward. Anti-clockwise turning - leg support moves
backwards.
Use special sole for small feet
- only for Innowalk Pro Small.
Use extra soles to compensate for leg length
discrepancy.
2 3
4 5 6
TRAY
DISPLAY PREVENTION OF KNEE OVER-STRETCH
SPECIAL SOLES FOR SMALL USERS
SOLE FOR LEG LENGTH DISCREPANCY
1

Un-hook the guide-string from
the leg support hook.
Release the straps over the feet
of the foot plate.
Hold onto the guide-string to
control tension when going
from standing to sitting.
Release the hip belt, anti-
overstretch and shoulder straps.
TRANSFER THE USER OUT OF THE INNOWALK PRO
NOTE!
Innowalk Pro is a medical device, delivered
by Made for Movement. The device must be
used in strict adherence to the user’s manual
following the product. Failure to do so may
result in personal injury.
The Innowalk Pro should only be used under
recommendation of a clinical professional.
1 2 3
4 5
Release the chest support and transfer the user out of the
Innowalk Pro. It is recommended to use a personal lifter.

[phone]
madeformovement.com
For more information
please contact us
Subject to printing errors / MfM-EN-0620 / © 2017 Made for Movement AS All rights reserved.