Maestro MR509 User manual

Модель/Model: MR509
Owners manual. Blender
Bedienungsanleitung. Stabmixer
Instrukcji obsługi. Blender
Manualul proprietarului. Blender
Руководство по эксплуатации. Блендер
Керівництво з експлуатації. Блендер
EN
DE
RO
PL
UA
RU
091
Сerticated in Ukraine
Виріб сертифіковано в Україні

2
Pictures/ Rysunki/ Figuri/ Рисунки/ Малюнки 1
1
3
2

3
Dear customer, we thank you for purchase of goods
Functionality, design and conformity to the quality standards
guarantee to you reliability and convenience in use of this device.
Please read and comply with these original instructions prior to the
initial operation of your appliance and store them for later use of
subsequent owners.
Blender is designed only for handling (mixing) liquid and not solid
products in domestic conditions.
Under condition of observance of user regulations and a special-
purpose designation, a parts of appliance do not contain unhealthy
substances.
Technical specications
Model MR509
Electrical supply:
Alternating current- AC;
Rated voltage 220-240V;
Rated frequency 50Hz;
Power consumption 175 W
Protective class II
Protection class IPX0
Regime of operation: continuous operation during max. 1min.,
pause during at least 4 min. to complete cooling.
EN

4
Description of the appliance
Picture1 (page 2)
1. Electric drive case
2. Switch on button
3. Nozzle: submerged blender
Safety instructions
When using your appliance, basic safety precautions should
always be followed, including the following:
SPECIAL INSTRUCTIONS
ATTENTION!
NEVER immerse the electric drive case, cable or plug in any liquid.
NEVER touch the appliance with wet or damp hands.
ALWAYS disconnect appliance before cleaning, assembling,
disassembling, loading and unloading products
Failure to observe these rules may result in electric shock!
- DO NOT let children or untrained persons use the appliance
without supervision.
- DO NOT leave the appliance unnecessarily plugged in. Disconnect
the plug from the mains when the appliance is not being used.
- DO NOT use the power cord or the appliance in order to pull the
plug out of the socket.
- DO NOT leave the appliance exposed to the weather (rain, sun,
etc.).
- DO NOT leave the appliance without supervision when it is
connected to the power supply.
- Use of low-quality electric extension pieces or adapters of mains
plug may cause damage of the electric device and re.

5
- Close supervision is necessary when the appliance is used
near children.
- Always unplug from the plug socket when not in use and before
cleaning.
- Do not operate the appliance if damaged, after an appliance
malfunctions or it has been damaged in any manner, return to at
authorized service engineer for repair.
- In the interest of safety, regular periodic close checks should be
carried out on the supply cord to ensure no damage is evident.
Should there be any signs that the cord is damaged in the slightest
degree, the entire appliance should be returned be authorized
service engineer.
- Do not let the cord hang over the edge of a table or counter or
touch hot surfaces. Allow unit to cool before storage.
- Do not use harsh abrasives, caustic cleaners or oven cleaners
when cleaning this appliance.
- This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
-If your device was brought from cold to warm room, do not switch
it on within 2 hours to prevent damage due to condensation on
internal parts.
-Do not use damaged nozzles.
ATTENTION!
The device has very sharp cutting blades which demand extremely
careful handling.
- Do not touch moving parts during the blender operation
EN

6
- Always disconnect appliance before cleaning, assembling,
disassembling, loading and unloading products
Perform assembly and disassembly only after full stop of moving
parts.
In case of failure to observe the rules a danger of serious
damages may arise!
- THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. DO NOT
USE THE APPLIANCE FOR ANYTHING OTHER THAN INTENDED
USE.
Purchase industrial devices for commercial use.
Actions in extreme situations:
- If a device tumbled into water, immediately, unplug the device, not
touching to the device or water.
- In case of appearance from appliance of smoke, sparkling, strong
smell of a burn isolation, immediately stop use the device, unplug
the device, appeal to the nearest service center.
Operation
With the aid of this blender you can cook wonderful soup-puree,
mayonnaise, sauces, cocktails, savories, baby foods and many
other dishes.
Observe safety rules when using blender. Uninterrupted work of the
blender cannot exceed 1 min., the next pause must be at least 4
min. to complete cooling of the device.
Cool hot products before handling.
Peel fruits and vegetables, remove pits and cut into pieces 2х2cm in
size before the beginning of handling.
Do not handle very hard products such as: serials, rice, co󰀨ee, ice,
frozen products.

7
Preparation for work
- Before the rst use remove packing material, make sure that all
parts of the device are not damaged.
Before the rst use wash all removable parts with warm water and
detergent and thoroughly dry.
- It is prohibited to submerge the case of electric drive, its mains
connector and the plug in water or any other liquid.
Attention! At the time of the rst switching on the device, a specic
smell or smoke may appear for a short time. These are normal
phenomena due to the presence of preservation materials on the
electric drive motor. They shall disappear after several minutes of
the device operation.
The use of submerged blender.
Insert the shank of the submerged blender (3/ Fig.1) in the case
of electric drive (1/Fig.1) as far as it will go and turn clockwise until
xed.
Connect the device to the mains 220 – 240 V, 50Hz.
To avoid sloping out the dishes you are using must be lled with
products not more than by 2/3. Always use submerged blender
for mixing ingredients with water or other liquid. Do not mix dry
products.
- Before switching on put the blender into the container with the
products to be mixed.
For switching on the device, press and hold button (2/Fig.1)
EN

8
Table1
The release of a button switches o󰀨 the device.
After using disconnect the electric drive from the mains, disconnect
the nozzle from the drive turning it counter clockwise.
Examples of cooking dishes
Mayonnaise
Ingredients:
200-250 ml of vegetable oil
1 egg (yolk and white)
1 table spoon of lemon juice or vinegar
Salt, pepper to taste.
Place all ingredients in a glass in the above mentioned order.
Submerge the blender to the bottom of the glass. Switch on the
blender by pressing and holding the switch-on button, wait till
vegetable oil turns into emulsion. Then without switching o󰀨 the
device slowly move the blender up and down until you get the
mayonnaise of desired consistence.
Cocktails from ice-cream
Using extra rich ice-cream and various syrups as ingredients you
can obtain the desired gamma of tastes for your cocktails.
Ingredients Q-ty of the product being
handled Time of handling
Fruits and vegetables 50-100g 25-30s
Baby food, sauces,
puree 50-200g 25-30s
Beverages, shakes
and cocktails 50-500g 25-30s

9
Place 2 large scoops of ice-cream and 3 table spoons of
chocolate or strawberry syrup in the glass. Pour in ½ glasses
of milk and mix till it become thick and foamy. Pour into cold
glasses. To make the cocktail thicker add 1 banana before mixing.
Smoothies strawberry with yogurt
Ingredients:
250 ml of мл of nonfat milk
1,5 glass of fresh or frozen strawberries
150 ml of yogurt.
Firstly mix strawberry with yogurt to homogeneous mass, then add
milk and again whip everything until getting a homogeneous mass.
Cleaning and maintenance
ATTENTION!
- Never clean the device while it is connected to the mains.
- Before cleaning disconnect the device and wait for full stop of
moving parts.
- Do not use abrasive and aggressive detergents, solvents, alkaline,
metal objects and wash-ups.
- Never submerge electric drive, its mains cable and plug in water
or other liquid, do not wash the drive in water or in a dish washing
machine.
-Wash cutting blades with special care!
Immediately after the use wash (without soaking for a long time) the
nozzle with warm soapy water using a soft nylon sponge, then wipe
with a dry clean towel. Water temperature must not exceed 60ºС.
The blender can be washed in a dish washing machine; however,
the dosage of detergent must not be exceeded. After handling some
coloring products (for example, carrots) plastic parts of the nozzle
EN

10
may become colored. After placing them in a dish washing machine
wipe them with vegetable oil.
After handling salty products the blender must be washed
immediately.
Let the blender completely dry.
Wipe the case of the electric drive with a soft cloth and rub it dry
with a clean towel.
- Clean, wipe dry and dry the device before storage.
Storage
- Wipe and dry the appliance before storage.
- Store the appliance in a cool, dry and clean place beyond the
assess of children and people with limited physical and mental
abilities.
Environmental protection
Old appliances contain valuable materials that can be recycled.
Please arrange for the proper recycling of old appliances. Please
dispose your old appliances using appropriate collection systems.
Subject to technical modications!