Maevi Smart Plug User manual

Maevi Smart Plug
Quick Start Guide

2
Introduction
The Maevi Smart Plug monitors the energy usage of connected appliances. It allows you to
turn these devices on and off remotely as well as setting on/off schedules from Maevi app.
Get to know your device
Buttons
On/Off button
Used to switch the socket ON and OFF
Reset Button
•Return the device to default factory settings
•Set the device in pairing mode so as to pair
with a wireless switch
LED Indicator
LED Status
What it Means
LED Flashing
The device has not joined a network
Green LED solid on
The load is ON
RED LED solid on
The load is OFF
LED flashing three times
Entering pairing mode or return to the default
factory settings

3
Get Started
To get started, you will need :
•Maevi Gateway
•Maevi Smart Plug
•Maevi Mobile App
(Available for download on Google Play Store and Apple App Store)
Then follow the steps below:
1. Insert the Smart Plug into socket, on the power supply and the LED indicator will begin
flashing green or red.
Tip: If the LED indicator is not flashing, please press and hold the reset button for 10 seconds (LED
indicator will flash three times at three seconds and flash again three times at 10 seconds) then the
indicator will keep flashing slow when the device is return to default factory setting.
2. Open Maevi App and go to “Home Automation” tab.
3. Select “Add New Device” button to pair the Smart Plug with the Gateway.
Tip: You can also press and hold the “Z” button on the Gateway for two seconds until the LED indicator
turns steady blue.
Pairing Device
Button

4
4. The Smart Plug is successfully paired with the Gateway when the LED indicator at the
Smart Plug turns solid.
5. The Smart Plug should now appear in the app as Smart Plug. If not, refresh the “Home
Automation” page by pull it down and release.
6. Click the Smart Plug to see individual info page.
7. Connect the appliance which you want to monitor into the Smart Plug.
Note: Make sure your appliance is within the 10A output rating of the Smart Plug.
Success paired
devices
On/Off
Status
Home Automation Page
Smart Plug Info Page

5
Features
Info Tab –Energy Consumption / Reset Energy Consumed / Remove Device / Rename Device
/ Device Info
Energy
Consumption
Reset Sum Energy and Sum Cost
(Accumulated)
Edit Button
To Remove
Device
To Rename
Device
To Save
Changes
Device Status/
Info

6
Automation Tab - Create Schedule to turn On/Off Appliance
Select Automation tab,
tap
+ Add new automation
schedule
Select status : ON/OFF
Select Time,
tap Confirm
Select Day,
tap Confirm
View details,
tap Confirm
Successful create
schedule

7
Reset Smart Plug
Step:
1. Insert the Smart Plug into socket, on the power supply.
2. Use a pin key tool to press and hold the reset button for 10 seconds (LED indicator will
flash three times at three seconds and flash again three times at 10 seconds).
3. Reset is successful when the LED indicator keep flashing slow.