Magic Bullet Mini juicer User manual

user guide.

32
general safety
information:
• This juicer system has sharp
blades and moving parts
and is NOT intended for use
by children or persons with
reduced physical, sensory,
or mental capabilities, or
who lack experience and
knowledge of its safe
operation. Such persons
require close supervision and
thorough instruction on its
proper use and safe operation.
• Close supervision is necessary
when any appliance is used
near children. Keep cord out
of reach of children. This
appliance is not a toy. Do not
allow children to play with it.
• To protect against fire, electrical
shock, and injury to persons, do
not immerse the appliance,
motor base, cord, or plug in
water or any other liquid.
• Turn the juicer OFF when:
plugging or unplugging
appliance from outlet, before
putting on or taking off parts,
and before cleaning or
attempting to move the
appliance.
• Always unplug the juicer when
not in use.
• Avoid contact with moving
parts.
• Regularly inspect the power
supply cord, plug, and actual
appliance for any damage.
Do not operate any appliance
with a damaged cord or plug,
or after the appliance
malfunctions or is dropped or
damaged in any manner.
Contact our Customer Service
department for assistance at
1 [phone].
• The use of attachments not
recommended or sold by
magic bullet®may cause fire,
electric shock, personal
injury, or product damage,
and will void the warranty.
• This appliance is for
household use only. Do not
use this appliance for
anything other than its
intended use. Do not use in
moving vehicles or boats.
Do not use outdoors.
Misuse may cause injury.
• Do not let the power cord
hang over the edge of a table
or countertop.
• Do not let the power cord
touch hot surfaces, including
a stovetop, or become knotted
or tangled.
• Always make sure the juice
bowl cover is securely in place
(with locking arms in their
upright and locked position)
before the motor is turned
on. Do not unlock the locking
arms while the juicer is in
operation.
• Do not operate without the
pulp container in place.
• Always ensure the juicer is
turned off after each use.
Make sure the sieve has
stopped rotating and the
motor has completely stopped
before disassembling.
• Do not push food into the
feed chute with your fingers
or utensils. Always use the
food pusher provided. Do not
place hand or fingers inside
the feed chute when it is
attached to the appliance. If
food becomes lodged in the
feed chute, use food pusher
provided or another piece of
fruit or vegetable to push it
down. Turn the motor off and
ensure that all moving parts
have stopped before
disassembling juicer to
remove the remaining food.
• Do not use appliance if the
sieve is damaged.
• Do not use the appliance
without the juice bowl and
juice bowl cover attached to
the motor base. Please see
Assembly instructions for
proper placement.
additional safeguards:
• Remove and safely discard
any packaging material
or promotional labels
before using the juicer for
the first time.
• To eliminate a choking hazard
for young children, remove
and safely discard the
protective cover fitted to the
power plug of this appliance.
• Blades are sharp. Do not
touch the small cutting
blades/teeth of the blade disc
(the bottom/base of the sieve).
• Do not put any non-food items
into the feed chute.
important safeguards.
when operating your magic bullet®Mini Juicer, remember:
safety comes first.
Warning! To avoid the risk of serious injury, carefully read all
instructions before operating your magic bullet® . When using any
electrical appliance, basic safety precautions should always be
observed, including the following important information.
READ ALL INSTRUCTIONS CAREFULLYAND THOROUGHLY BEFORE
OPERATING.
!
Save these instructions!
FOR HOUSEHOLD USE ONLY

54
• Always make sure the juicer
is properly and completely
assembled before connecting
to a power outlet and
operating.
• Ensure that the surface where
the appliance operates is
stable, level, clean, and dry.
• Vibration may occur during
normal operation.
• Any significant spillage onto
the surface under or around
the appliance, or onto the
appliance itself, should be
cleaned and dried before
continuing to use the
appliance.
• This juicer is only designed
to juice fresh fruits and
vegetables. Do not juice
frozen fruits or vegetables.
• Hard fruits and vegetables
may put excess strain on
the motor.
• Remove rind from all citrus
fruit before juicing.
• Do not juice stone fruit unless
pits or seed stone have been
removed.
• Do not leave the appliance
unattended when in use.
• Keep hands, fingers, hair,
clothing, spatulas, and other
utensils away from the
appliance during operation.
• Keep the appliance clean.
Refer to the Care and
Maintenance section for
tips and best practices.
and safely discard the
protective cover fitted to the
power plug of this appliance.
caution: This appliance is
wired for domestic use only.
To avoid an electrical hazard
this appliance must not be
powered or supplied through
an external switching
device, such as a timer
or voltage adapter.
ventilation safety:
• The motor base features
ventilated openings on the
bottom to ensure reliable
motor operation and prevent
overheating. To prevent a fire
hazard, make sure that
these openings remain
unobstructed by dust, lint,
or other materials. Never
place your magic bullet®
on top of flammable items
such as newspapers,
tablecloths, napkins, dish
towels, place mats, or other
similar materials.
caution: Always operate
the magic bullet®on a level
surface, leaving unobstructed
space beneath and around
the motor base to permit
proper air circulation.
• Do not operate on or by a wet
surface. Do not operate with
wet hands.
• Any maintenance other than
cleaning should be performed
by an authorized Service
Center. Do not attempt to
repair or service this juicer
yourself. Contact Customer
Service for assistance at
1 [phone].
• If any of the contained
instructions or warnings
are not understood, please
contact Customer Service
for assistance at
1 [phone].
polarized plug
information:
• This appliance has a
polarized plug (one blade is
wider than the other). To
reduce the risk of electric
shock, this plug will fit in a
polarized outlet only one way.
If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician. Do not
modify the plug in any way.
• Remove and safely discard
any packaging material
or promotional labels
before using the juicer for
the first time.
• This appliance has important
markings on the plug blade.
The attachment’s entire cord
set is not suitable for
replacement. If damaged, the
appliance must be replaced.
• To eliminate a choking hazard
for young children, remove
important microwave
safeguards:
• Do not place any of the magic
bullet®parts in a microwave,
oven, or stovetop pot or
immerse in boiling water as
this may result in damage.
warning: Always inspect the
sieve before each use. Never
us a cracked, bent or damage
sieve. Using a damaged sieve
may result in the risk of
personal injury.
medical safety:
• The information contained in
this User Guide is not meant to
replace the advice of your
physician. Always consult your
physician regarding health
and nutrition concerns.
MEDICATION INTERACTIONS:
• If you are taking any
medication, especially
cholesterol medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please check
with your physician before
trying any of the recipes.
Save these
instructions!
!

76
contents.
08 what’s included
09 assembly guide
10 assembling the magic bullet®Mini Juicer
14 using the magic bullet®Mini Juicer
18 disassembly guide
22 juicing tips
24 troubleshooting
25 care and maintenance
26 how to store
26 replacement parts
27 magic bullet®Mini Juicer
one-year limited warranty
29 product registration
thank you for purchasing the magic bullet®Mini Juicer.

8
400-watt
motor base
with locking arms
juice bowl cover
with 2" feed chute
food pusher
juice bowl with
silicone spout cap
stainless steel
sieve
pulp bin juice cup lid
sieve
cleaning brush
assembly guide.what’s included.
food pusher
feed chute
juice bowl cover
juice bowl
stainless steel
sieve (inside bowl)
juice cup lid
silicone spout cap
16oz juice cup on/o switch
400-watt motor base
pulp bin
16oz juice cup
2 locking arms
note: cord wrap located on bottom of unit.
9

1110
2Place the Juice Bowl on
top of the Motor Base.
The Juice Bowl is keyed to
fit correctly in one position
on top of the Motor Base,
so rotate or adjust the
bowl as needed until it is
seated in place.
1Place the Motor Base on
a clean, dry, level surface,
like a countertop. Make
sure the unit is unplugged.
3Align the Sieve with the
motor drive coupling and
push down until it clicks into
place. You may need to
turn the Sieve to properly
align it with the motor drive
coupling and make sure it is
properly seated in place.
Handle the Sieve by
gripping the top edges,
being careful not to touch
the sharp teeth on the
base of the Sieve.
4Place the Juice Bowl
Cover over the Juice Bowl
and Sieve.
When placing the Juice
Bowl Cover onto the Juice
Bowl, make sure the
cover’s Feed Chute is over
the Sieve (A), and align
the Pulp Chute with the
back of the unit (B) so it
sits over the Juice Bowl’s
open side.
assembling the
magic bullet®
Mini Juicer.
A B

1312
9Put the Juice Cup Lid on
the Juice Cup, making
sure it is tightly sealed,
and open the locking lid
latch on top of the lid,
rotating it up and out of
the way.
10 Position the Juice Cup
under the Spout Cap so
that the Spout Cap is
directly over, and slightly
inside, the hole in the
Juice Cup Lid.
note: To do this, you’ll need to
tip the Juice Cup forward at a
slight angle, so the hole in the lid
can slide right under the Spout
Cap and fit snugly into place.
This will help eliminate spillage
and keep the Juice Cup in place
during juicing.
note: Other containers may
also be used to collect juice,
instead of the Juice Cup.
7Insert the Food Pusher
into the Feed Chute.
8Turn the Silicone Spout
Cap so the nozzle is
facing down.
6Guide the Pulp Bin into
place at the back of the
unit, directly under the
back edge of the Juice
Bowl Cover.
Tilting the Pulp Bin slightly,
guide it onto the back of
the Juicer so that the back
of the Juice Bowl Cover
slides into the top of the
Pulp Bin.
The Pulp Bin will ‘snap’
into place when properly
attached. Once the Pulp
Bin is attached to the
back of the Juice Bowl
Cover, gently push on the
base of the Pulp Bin to
lock it into place.
5Raise the two Locking
Arms on either side of
the Motor Base and snap
them into place.
Lift each arm until the
top part of it grips the top
edge of the Juice Bowl
Cover, then snap the
bottom part down until it
locks. Both arms should be
in a vertical position and
locked securely in place.
warning: If the Locking Arms
are not securely locked in place,
the juicer will not power on.
11 Assembled Mini Juicer.

1514
using the
magic bullet®
Mini Juicer.
2Double check that the
Mini Juicer is properly
assembled: the Locking
Arms are in their upright
and locked position,
holding the Juice Bowl and
Juice Bowl Cover in place
over the Motor Base, with
the Pulp Bin positioned
at the back of the Juicer,
directly under the back
edge of the Juice Bowl
Cover. Also, make sure the
Spout Cap is in its down
position and the Juice Cup
is directly under it.
Plug the power cord into
an electrical outlet.
1Gather all of your desired
ingredients and wash
them. Prepare the
ingredients by cutting,
skinning, or removing
the rind, stems, and
stone seeds.
3Press the Power Button
down into the ON position,
to start the Sieve spinning
inside the Juice Bowl.
note: Always start the Mini
Juicer before putting food into
the Feed Chute.
4While the motor is
running, begin feeding
your ingredients into the
Feed Chute. You can use
the Food Pusher to gently
guide food down into the
Feed Chute.
Do not use excessive force
when pushing food down
with the Food Pusher,
as this will not allow for
maximum juice yield, and
may damage the unit.
warning: Never use hands,
fingers, utensils, or other tools to
push food down the Feed Chute.
ONLY the Food Pusher should
be used to push ingredients
down into the Sieve.
tip: When juicing leafy greens,
take a handful of greens and
make a small ball with them.
Add to the Feed Chute, and
slowly push down for maximum
juice extraction.

1716
5Juice will begin to flow out
of the Spout Cap and into
the Juice Cup (or other
container of choice). The
pulp will be separated,
and stored in the Pulp Bin.
6When the Pulp Bin is
completely full, it must be
emptied before continuing
juicing. (See Disassembly
instructions.)
Additionally, when the
Juice Cup is at the MAX
line, it must be emptied
before continuing juicing
to avoid spillage.
7When you are done, press
the Power Button up
into the OFF position to
stop juicing.
caution: Wait for the Sieve to
completely stop spinning before
removing the Juice Cup from
under the Spout Cap or starting
disassembly.
8When juicing is completed,
and after the unit is
powered o, remove
the Juice Cup (or other
container of choice) from
under the Spout.
note: To remove the Juice
Cup, tip it forward at a slight
angle, so the lid’s hole has some
separation from the Spout Cap,
then you can slide out the cup.
(This is the reverse of what you
did during assembly.) Then,
close the Spout Cap by turning
it upwards, keeping it in place
over the spout. By twisting the
Spout Cap so the nozzle points
up, you can avoid any spillage
(such as residual drips onto the
unit or onto the surface below
the Mini Juicer).
tip: We recommend using one
hand to pull the Juice Cup away
from the Mini Juicer, while using
the other hand to turn the Spout
Cap UP.
9Always make sure that
the Mini Juicer is turned
o after each use.
Power Button should be in
the up (OFF) position.
caution: NEVER unlock the
Locking Arms from the Juice
Bowl while the Sieve is still
rotating. Always wait until the
unit is completely powered
o, and the Sieve as stopped
rotating before starting
disassembly.

1918
disassembly
guide.
2Remove the Juice Cup
from under the Spout.
note: To do this, you may need
to tip the Juice Cup forward
slightly, so the cup has some
separation from the Spout, then
slide out the cup.
1Make sure the Mini
Juicer is powered OFF
and unplugged before
starting disassembly.
Ensure that the motor
has completely stopped,
the Sieve has stopped
rotating, and all moving
parts have stopped
before disassembling the
Mini Juicer and removing
the remaining pulp.
3Immediately turn the
Silicone Spout Cap
upwards. By turning
the Spout Cap up right
away, you can avoid any
residual drips onto the
unit or onto the surface
below the Mini Juicer.
4Unlock the Locking Arms
from the Juice Bowl Cover
by pushing up from the
bottom of the Locking Arms
(A), on either side of the
Motor Base — then let the
two Locking Arms fall slowly
away from the unit (B).
caution: NEVER unlock the
Locking Arms from the
Juice Bowl while the Sieve
is still rotating. Always wait
until the unit is completely
powered o, and the Sieve
as stopped rotating before
starting disassembly.
A
B