Magic Leap 2 User manual

DRAFT
QUICK START GUIDE
ML2 Safety User Guide (Rev. 4.1.2022)

DRAFT
What’s in the Box
Your Magic Leap 2 for Enterprise box contains:
●Headset
●Compute Pack
●Controller
●Enterprise Charger - 2 x 45W USB-C charger and cables for
Compute Pack and Controller
●Fit Kit for Headset. A set of nose pads and forehead pads to
customize the fit
●Optional Overhead Strap to support in-motion use and slippage
●Frame with eye cups
●Shoulder strap for crossbody wearing
●Controller lanyard to attach to users wrist
●Carry Case and Cleaning Cloth, robust case to carry Headset,
Compute Pack and Controller
Pictured: Magic Leap 2 Headset, Compute Pack and Controller.

DRAFT
Attach Your Compute Pack to a Pocket…
Slide the Compute Pack onto a pocket until it moves past the clip.
Please don’t put the Compute Pack in a pouch or pocket while in use or
block the vents.
The Compute Pack easily clips onto your pocket.

DRAFT
… Or to the Shoulder Strap
Clip the carabiners on the Shoulder Strap to the corresponding
fasteners on the Compute Pack. Get comfortable by adjusting the
length.
Fasten the carabiners on the ends of the Shoulder Strap to the Compute Pack to
hold it into place.

DRAFT
Put on your Headset
Gently stretch the back of your Headset headband until it comfortably
fits over your head. For the best comfort and visual experience, rest the
Headset around the widest part of your head. If necessary, insert
required pads and nosepiece from the included Fit Kit for an
individualized comfortable fit for you.
The Headset adjusts to the width of your head by gently stretching the temples of

DRAFT
the device.
Prevent Tangling the Cords
Be sure to prevent the cord from getting tangled or wrapped around the
headband.
The Headset cord should be clear of the headband accessory and torsion band.

DRAFT
Wear Glasses?
Pull the magnetic frame away from the Headset and replace it with the
Prescription Insert. Order yours at Rochester Optical’s
FrameofChoice.com.
A correctly seated Prescription Insert.

DRAFT
Turn On Your Magic Leap
Press the button on the front of the Compute Pack and wait until the
lights are fully illuminated.
The five lights towards the top of the Compute Pack will be illuminated when fully
powered.

DRAFT
Identifying Buttons and Controls
Review the corresponding illustrations to become familiar with the
buttons and controls of your new Magic Leap 2.
Identify the buttons and controls on the Magic Leap 2 Controller and Compute Pack
pictured.

DRAFT
Set Up Your Device
Your device needs to be set up before you can use it.
1. Your Controller should be connected to your device from the
factory. If it isn’t already connected, pair your Controller to the
Compute Pack using the USB-C to USB-C cable. You can then
follow the prompts in your device.
2. Connect to WiFi using the Settings app.
a. Click on Network and internet.
b. Click on Wi-Fi.
c. Scroll through the list of WiFi using the touchpad and choose
your preferred network.
d. For secure networks, a virtual keyboard will popup: Enter your
password using the Controller.
e. Click “connect” on the WiFi screen.
Connect to WiFi through the Home > Setting > Network & internet menu, pictured
here.