Mainstays BELDEN PARK User manual

MSS129900298052
MSS129900298053
MSS129900298054
Need Assistance?
ASSEMBLY AND CARE GUIDE
MAINSTAYS BELDEN PARK 3 PIECE PATIO
BISTRO SET
Contact our toll free Customer Service Hotline at:
[phone]
-Monday through Friday 7:30am until 3:30pm PST-

Warranty
2 YEAR LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOT COVERED
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abusive use. In
addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions
with similar merchandise, if the model in question is no longer in production.
Important Safety Instructions
PLANNING ASSEMBLY
Read all instructions before assembly
To avoid damanging this product, assembly it on a soft non-abrasive surface such as carpet or carboard.
NOTE: More than one person may be required to assemble this product.
Attention
○Use the correct bolts as indicated. Do not tighten any of the bolts until the product is completely assembled
○Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required
○Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
○Retain these assembly instruction for future reference.
1
MSS129900298052
MSS129900298053
MSS129900298054

A. Read instructions thoroughly. Acquaint yourself with the inventory of parts and the accompanying
drawings to ensure safe and proper assembly.
No. Qty Picture
A
B
C
B. Lay out all of the parts on a flat surface and identify them using the table below.
2
Bolt
M8X25
Wrench
Single chair*2
No. Qty Picture
X
Y
Z
1
1*2
1*2
1*2
4*2
4
1
8
DD
BB
AA
EE
Table
Seat
Base
TR Rotating Components
Top
Leg
Leg Fixture Bracket
ST4.8X13
CC 4
Table
Bolt
M6X25
Allen Key
MSS129900298052
MSS129900298053
MSS129900298054

Assembly
Step 1: Attach TR rotating components(C) to the bottom of seat(A) using bolt(AA) and wrench(BB).
Step 2: Insert the assembled seat(A) with TR rotating components(C) to the base(B), rotate and fix.
Note: Do not tighten bolts until all parts are connected
Step 1. Step 2.
Single chair
3
MSS129900298052
MSS129900298053
MSS129900298054
A
AA
C
AA
A
B
C
Step 1:
Step 2:
Note: Do not tighten bolts until all parts are connected.
You will need a Phillips Screwdriver.
Step 1. Step 2.
Table
Attach four legs(Y) to the tabletop(X) using four screws(DD).
Assemble leg fixture bracket(Z) to legs(Y) using bolts(BB) and ratchet tool(EE).

4
Maintenance
We recommend the use of furniture covers when not in use.
In order to prolong the life and beauty of your furniture , we recommend that it be stored in a dry and
protected area during off season periods.
.
○
○
○
Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and
safety of your product.
MSS129900298052
MSS129900298053
MSS129900298054