Majestic ONE PU User manual

USER GUIDE

Warning
When you use your board you are exposed
to numerous risks of the obstacles encountered
on the road, collisions, fallsand loss of control
over the board.
Read this user guide carefully before using
the electric longboard.
Product is intended for people over
14 years of age.
Informaon 5
Safety rules 6
Take care of your longboard 8
Specicaon 10
Electric parts 11
Longboard parts 12
Longboard parameters 12
Replacing wheels to All Terrain 14
Replacement of PU wheels 17
Remotecontrolfuncons 20
Start•Poweron/otheremote•Sengs 21
Remote-boardpairing•Breakingremote-boardconnecon 22
Braking mode level • Changing the riding mode 23
Remotecalibraon•Movingforwards/backwards 24
Baeryvoltage•Settingspeedunits 25
Wheel size 26
Instruconsforbeginners•Preparingforaride 27
Return of ordered products 29
Manufacturerguarantee 30
CONTENTS

5
INFORMATION
The buyer will use the equipment on their own responsibility
and at his own risk and hewaives any claims, including recourse, against
the manufacturer/seller that may arise in connecon with the incorrect
use of equipment, especially use contradictory with the purpose
of the product by the buyer and the people to whom he makes
the product available for use, including waiving any claims against
the producer/seller due to an accident and related damage to health
and suered damage caused by improper/unskilful use of the equipment
hebought.
The product is an electrical device. Do not dispose as unsorted municipal wa-
ste.Returnonlytoaceredpointofwastecolleconorreturntotheprodu-
cer.Donotthrowinthere.Donotburn.Donotexposetointensesolarradia-
on.Donotexposetotemperaturesabove50°C.Donotdisposeinwateror
watertanks.Fordetailedinformaonontherecyclingofthedeviceorbaery,
pleasecontactyourlocalcitycouncil,thecompanyexporngmunicipalwaste
or producer (or store in which the product was purchased).

76
1. Alwaysridecarefully,complyingwithtracregulaons.
2. While longboarding, you should avoid:
SAFETY RULES
3. The control is carried out using wireless technology Bluetooth, which
waves may be distorted when using the device. Avoid riding in places
wherecommunicaonlosscouldbedangerous.
4. Never unscrew the electronic parts of the longboard. Opening
thebaerycoverisatriskofelectricshockandmayvoidyourwarranty
(exceptreplacementofabaerypurchasedfromthemanufacturer
ofelectricallongboardsMajescBoards).
5. Keepyourngers,clothesandhairawayfrommovableparts
of the board, i.e. a strap, motor or wheels.
6. Duringtheridethereisapossibilityofsmallobjectsgengintothe
drive belts that may block the engine.
7. One of the mistakes that causes the board to crash is driving down
steep hills and hard braking. This causes damage to the motor!
8. ElectroniclongboardcomponentshaveIP54proteconlevel,which
means that they are resistant to drops of water falling at any angle, on all
sidesandonobjectsover1mm.
9. Alwayswearahelmetandprotecveclothingforyourownsafetywhile
driving on an electric longboard. Do not ride in busy roads or do not
leavebrakingunlthelastmoment.
You should always wear
ahelmetandprotecve
clothing while riding.
gravel water steep uphill or downhill
roads
holes and
crackings
large rocks tracks trac night
drains
obstacles poor
visibility
These factors may cause
damage to the electric longboard
and they can create security risk for
the user.

98
TAKE CARE OF YOUR LONGBOARD
1. Regularly inspect your boards from damage and check that it is running
properly.
2. Beforeridingmakesureallscrewsareght.
3. Do not clean the board with harsh abrasives or chemicals; use a semi-
dampclothtowipeodustanddirtfromboardandwheels.
4. Turnotheboardandremotecontrolwhennotinuse.
5. Keepyourboardbaery50%chargedwhennotinuse.
6. Rechargethebaeryevery3monthswhennotinuse.
7. Donotleavethechargingboardunaended.
8. Disconnectthebaeryfromchargeronceitisfullycharged.
9. Do not leave the boards in a hot car.
10. Donotexposetheboardtoatemperatureabove50°C-itmayresult
in a loss of warranty.
11. Before each ride on the electric longboard, make sure all the screws are
properlyscrewed.Incaseofloosening,screwsshouldbeghtened.
12. Donotstorethelongboardinhumidcondions.
BATTERYINFORMATION
• Keep the battery half-charged when it is not longer used.
• Keep the battery fully charged for a maximum of two weeks.
• Lithium-ion battery does not require "formatting" - you do not need to
rechargeitsupto100%andunloadto"zero".
• It is better to charge the battery more often than to unload it to "zero" - it
will extend the battery life.
• Donotkeepintemperatureshigherthan50°C(122°F).
• The battery can be discharged to -20° C, but it must be charged
ataminimumof10°C(32°F).
• Longboard should be stored in dry conditions and at a positive
temperature.
• The battery used in the board should come only from the manufacturer
of electric longboards - Majestic Boards. Using other batteries results
in the loss of guarantee.
• The condition for recognizing the warranty is providing the proof
of purchase along with the product.

1110
USB Port
Power Button
Charging Port
Skateboard
Deck
Motor controller
Front Wheels
Brushless
Motors
Drive Belts
Motor Mounts
BushingsBushings
Rear Wheels
Motor Caps Motors
Brushless
rBattery cove
Front Truck
• Electric parts
Motor
1200W (total power in version with two 2400W motors)
Brushless
Baery
11.8 Ah
Lithium-ion
Voltage 21,6 V
Charger
Powered by 100-240V AC,
networkfrequency50/60HZ
Remotecontrol
2,4GHz
Bluetooth
USB charging port
SPECIFICATION
WARNING!
Do not attempt to open the control board cover
in the board - the repair can only be done
by an authorized service.
Lightsindicangthebaerychargelevelarelocatedonthecontrol
boardcover.Alllightsareglowinggreenwhenthebaeryisfully
charged,theystartswitchingoonebyonewhenthechargelevel
is dropping. The last remaining light is always glowing red.

1312
• Longboard parts
Deck
Length – 90 cm
Width – 23 cm
Construcon–5layersofbambooand2layersofglassbre
Shape – Twin + Concave
• Longboard parameters
SPECIFICATION
MAJESTIC►ONEPU ONEAT PROPU PROAT
Max.range(km) 42 25 32 20
Max.range+*(km) 84 50 64 40
Max.speed(km/h) 35 25 40 30
Max.load(kg) 100 100 110 110
Chargeme(h) 2,5/4 2,5/4 2,5/4 2,5/4
Power(W) 1200 1200 2400 2400
No.ofMotors 1 1 2 2
MAJESTIC►ONEPU ONEAT PROPU PROAT
Weight(kg) 7,2 8,2 8,2 9,8
Decksize 90 x 23 90 x 23 90 x 23 90 x 23
Wheelsize 80/97 mm 7′pumped 80/97 mm 7′pumped
Rims -Original
Majesc -Original Majesc
Trucks E-Carve E-Carve E-Carve E-Carve
Max.slope(%) 20 20 25 25
Warranty 2 years 2 years 2 years 2 years
Changeablewheels Yes Yes Yes Yes
F-Change
Technology** Yes Yes Ye s Ye s
Choosecolorofyour
board Yes Yes Yes Ye s
RemoteLCD Yes Ye s Ye s Yes
Addsecondmotor Yes Yes - -
Compabilitywith
futureupgrades Yes Yes Yes Ye s
Priceinshop 1049 USD 1149 USD 1249 USD 1399 USD
*rangewithextendedbaery
** change your wheels from AT to PU in 2 minutes!

1514
• Replacing wheels to All Terrain
1.Replacingthewheelwithoutadrive
a) usingtheT-Toolprovidedwiththeset,unscrewthenutxingthePU
wheel.
b) remove the spacer from the PU wheel.
c) pullothePUwheel.
d) check if the second distance washer is on the hanger's axis, if so leave it
inplace,ifnot,youcanprobablynditonthePUwheelbearing-putit
on the axle.
e) put the AT wheel on the axle so that the bearing located inside the rim
would be located on the outside.
f) put the spacer on the hanger's axis.
g) screw the nut so that the wheel does not slack and rotates freely
on the axis.
2.Replacingthedrivewheel
a) use the included small Torx key to unscrew drive belt cover.
b) using small Torx key loosen 4 screws securing the motor (loosen, do not
unscrew).Movethemotordownalongthegroovesinthemount.
c) usingtheT-Toolprovidedwiththeset,unscrewthenutxingthePU
wheel.
d) remove the spacer from the PU wheel.
e) pullothePUwheelalongwiththegearrack,largebearingandtoothed
belt.
f) puttwo25mmpadsonthehanger.
g) put the large drive belt on the hanger, so it hangs on it freely.
h) put the AT wheel with a toothed wheel and a large bearing on top of it
on the hanger's axis.
i) hitthewheellightlywithyourhandunlitclicksintoplace.Ifitdoesnot
fullyt,itwillaerghteningthenutontheaxle.
j) put the spacer on the hanger's axis.
k) screw the nut so that the wheel does not slack and rotates freely on the
axis.Ifthewheelisn'tintheproperposionyet,ghtenthenutunl
everythingts.Aerngunscrewthenutslightlysothatthewheel
can rotate freely.
l) put the drive belt on the large gear next to the AT wheel and on the
small gear wheel of the engine.
SPECIFICATION
Tools needed: T-Tool, Torx key 4
The AT set contains:
• 4 AT wheels (set consisting of rims, tires, inner tubes of small bearings)
Instruconalvideosavailableatproducent'swebsite.
• large sprocket
• large bearing
• toothed belt
• distance pads

1716
SPECIFICATION
• Replacement of PU wheels
1.Replacementofwheelswithoutadrive
a) unscrewthenutxingthePUwheelusingtheT-Toolprovidedwiththe
set.
b) remove the spacer from the PU wheel.
c) pullothePUwheel.
d) check if the second distance washer is on the hanger's axis, if so leave it
inplace,ifnot,youcanprobablynditonthePUwheelbearing-putit
on the axle.
e) put on the PU wheel.
f) put the spacer on the hanger's axis.
g) screw the nut/cap so that the wheel does not slack and rotates freely on
the axis.
WARNING!
When replacing wheels from AT to PU and from PU to
AT, replace the self-locking nuts fixing the wheels on
the axis of the hanger or use an anaerobic adhesive for
safe tightening of the wheels.
2.Replacementofdrivewheels
a) use the included small Allen key to unscrew drive belt cover.
b) unscrewthenutxingthePUwheelusingtheT-Toolprovidedwiththe
set.
c) remove the spacer from the PU wheel.
m) grasp the engine with one hand, move it upwards so that the toothed
beltisstretched.Usesmallforce.Withtheotherhand,ghtenthe4
screwsxingtheenginewithasmallTorxkey.Thestrapshouldbend
lightlyunderthepressureofthenger,andthewheelshouldrotate
without much resistance. (Important! The engine mount should be
ghtenedonlywithamatchingTorxkeyfromtheset,inserngittothe
endandghtenitwithsensivitysothatyoudon'ttwistit).
3.Checkifthemotoranddriveareworkingcorrectlywithoutgengonthe
board.
4. If the engine and drive are working properly, you can drive!

1918
d) pullothePUwheel.
Duetothengoftheparts,youneedtopullothedrivewheelusing
more strength. Relax - nothing will go wrong ;)
1)Onlythewheelhasbeenpulledo-leavetherackinplaceandpress
the PU wheel with bearings on top of the set. (go to point "e" and
then "g")
2)Thewheelhasbeenpulledoalongwiththegear:
• the large bearing remains in the rack - leave it in place
• the large bearing is located on the hanger bushing - leave it in place
• remove the gear manually and then press it into the new PU wheel.
e) put a PU wheel with a sprocket and a large bearing on it on the hanger's
axis.
f) hitthewheellightlywithyourhandunlitclicksintoplace.Ifitdoesnot
fullyt,itwillaerghteningthenutontheaxle.
g) put the drive belt on the wheel sprocket and engine sprocket. Do not
unscrewtheengine.Aachthestrapinthesamewayasyouaacha
bikechain.Thebeltshouldnotbetooghtorloose.Thewheelmust
rotate easily while driving it with the remote control.
h) put the distance washer on the hanger's axis.
i) screw the nut so that the wheel does not slack and rotates freely on the
axis.Ifthewheelisn'tintheproperposionyet,ghtenthenutunl
everythingts.Aerngunscrewthenutslightlysothatthewheel
can rotate freely.
j) fasten the engine rack cover using the included key.
Before driving, make sure that all wheel bolts are located in the right place.
Warning
1. Do not use polyurethane wheels for paving stones surfaces, for this type
ofsurfacealwaysuseo-road(AT)wheels.
2. Storingthewheelsabove40°Cmaycausethemtobedistorted.
Distortedwheelsstoredabovethepermiedtemperaturearenotcove-
red by the warranty.
3. O-roadwheelsshouldbepumpeduptoamaximum
of2,5atmospheres.
4. When replacing wheels with AT on PU and PU on AT, replace
theself-lockingnutsxingthewheelsonthehanger'saxisoruse
ananaerobicadhesivetosafelyghtenthewheels.
SPECIFICATION