MAJORITY A10-CAR-BLK Manual

A10-CAR-BLK
Digital Radio Adapter
Instrucons Guide
J
O
U
R
N
E
Y
A
1
0

What’s in the Box?..................................................... 1
Diagram Control Funcons ........................................2
Support .....................................................................7
Installaon ............................................................... 8
Installing the Car DAB/DAB+ Radio Adapter������������� 8
Navigaon Controls ������������������������������������������������� 16
Begin Listening To DAB/DAB+ ���������������������������������� 17
DAB/DAB+ Opons �������������������������������������������������� 18
DAB Staon Informaon����������������������������������������� 20
Bluetooth Media Funcon��������������������������������������� 21
Bluetooth Contact Funcon�������������������������������������22
AUX-in Funcon �������������������������������������������������������23
Sengs: MENU Buon Selecon ����������������������������24
Troubleshoong Guide ............................................ 25
Specicaons .......................................................... 26
Warranty ................................................................. 26
Safety Informaon................................................... 27
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majorityradios.co.uk
Contents
3YEAR
WARRANTY

1
What’s in the Box?
Box Contents
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
DAB Radio Adapter
Cable Clips
Adhesive Mount
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
Vent Mount
Cable Ties
Car Power Cable
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
DAB Radio DAB Radio
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
Screen wipe
(wet)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Screen wipe
(dry)
FM Trx
Windscreen Mount
Antenna
Magnetic Group
Screen Wipes

2
1. Locking ring
2. Locking lever
3. Suction release tab
4. Suction cup
5. Mounting board
Controls And Funcons
Diagram Control Functions
Top View / Control Buttons
3 4
5
2
1

3
1. 5VDC in USB connection
2. Mounting lugs
3. Reset button
4. Antenna connection
Controls And Funcons
Back View / Connections
RESET
1
2
4
3

4
FM Trx
9
5 6 7 8
Controls And Funcons
5. Menu button
6. Mode button
7. Preset button
8. FM Trx (Transmitter) button
9. Navigation dial/OK button
Front View

5
10
11 12 13
Controls And Funcons
10. Preset buttons
11. Power button
12. Aux in 3.5mm jack
13. Line out 3.5mm jack
Top/Bottom View and Connections

6
Magnetic Ground
1. Spade connection point
2. Magnetic ground
3. Magnetic point
The magnetic ground is made up of a magnet and a spade
connector.
The magnet must be connected to the vehicle body and the
spade connector is used to slide over the magnetic point of the
antenna.
Controls And Funcons
Antenna
Connect the Magnetic Ground to the metallic part of the
Antenna box.

7
Support
Thank you for your purchase of the Majority Journey A10.
Please follow the guidance of the manual to set up your radio
and enjoy its fantastic variety of stations and features.
If you require further assistance with your new radio, please
follow our tutorial set up guide under the ‘Video Tutorials’
section on our website.
If you would like any additional support, please
contact our support team on the Majority website:
https://www.majorityradios.co.uk/support/
Support

8
Step 1: Installing the magnetic ground
Before installing the main antenna, the magnetic ground will
need to be installed. To do this, the magnetic end of the ground
will need to become connected to a magnetic part of the car.
Slide this magnetic part facing upwards between the roof lining
and the car roof at the top of the window screen for the best
results.
The magnetic spade part of the magnetic ground should now
hang from the top of the car window screen ready for the next
step.
Now connect the magnetic spade to the metallic point at the
top of the antenna box. Do this by ensuring that the plastic of
the magnetic spade entirely overlaps the metallic point of the
antenna.
Installaon
Installing the Car DAB/DAB+ Radio Adapter
Please note all (Ref.) refer to the Controls and Functions mapping guide on
pages 2-5.

9
Installaon
With the magnetic mount connected to the magnetic point of
the antenna box, it is now time to connect the antenna to the
car window screen. Correct installation is important to ensure
that you receive good DAB radio reception.
Before installing the antenna to the car, ensure that the antenna
and radio are going to be tted well and without obstructing
and interfering with airbags, controls or mirrors in the vehicle.
We recommend installing your antenna on the opposite side
of the car to the driver’s side of the car, tted at the top of the
window screen. This is to ensure that you avoid obstructing
the driver’s view as well as extending the antenna as much as
possible for a better signal to be received.
You can now t your antenna by removing the antenna from the
plastic back packaging. Now stick the antenna and box to the
window screen. The antenna and magnetic ground should all lay
at and neatly within the top corner of the window screen.
Step 2: Installing the antenna
1

10
Now that the antenna is xed to the car window screen, the
antenna cable can be tted to the car DAB/DAB+ radio adapter.
Firstly, ensure that the antenna cable from the window screen
is not twisted or bundled to ensure that the best signal can be
transmitted. Use the supplied cable ties to shorten the antenna
cable if needed.
Connect the antenna to the radio via the antenna port at the
back of the radio adapter (Ref.) Simply connect to the screw
and twist the adapter gold screw until it is securely connected to
the radio adapter.
The antenna will now be set up with your car radio and ready for
the next steps.
Installaon
Step 3: Connect the antenna to the car radio

11
Connect the cigarette power cable USB port into the back of the
car radio adapter (Ref.) and plug the other end of the cable into
the cigarette lighter in the car.
The car radio adapter will now begin to light up and will display
‘Welcome to Digital Radio’.
The radio adapter will begin searching for all local DAB/DAB+
radio stations and the screen will show the progress bar and the
number of the radio stations received when scanning.
Once the scan is complete, the car radio adapter will begin
playing the rst station. At this point, it will show on the radio
adapter display screen but will not sound through the car as this
has not yet been set up.
Installaon
Step 4: Connect the car radio adapter to power
FMTrx

12
Connect the car radio adapter to either the window screen
mount or the car vent mount:
Please note that (Ref.) refers to the radio adapter on page 3 and
(MG.x) the window mount diagram on page 2.
Window Screen Mount
On the mounting board of the window screen mount, line
up the back of the car radio adapter (Ref.) to the clips of the
window screen mounting board (MG.5)
Now slide the car radio adapter clips up into the clips of the
window screen mounting board. Once they are connected, there
will be a click and bound securely to each other.
To remove the car radio adapter from the mount, simply hold
the radio adapter and pull it down from the window screen
mount to remove it.
To connect the mount and car adapter to the window screen,
choose the desired spot on your window screen and hold it in
place. The mount has a ball tting to allow you to adjust the
angle of the radio adapter once locked to the window screen.
Now pull down the locking lever (MG.2) on the mount to ensure
the mount suctions and locks to the window screen.
Releasing the mount
To remove the mount from the window screen, pull the locking
lever up (MG.2) from the mount to unlock it. To remove it, lift the
suction tab (MG.3) from the window to stop its suction to the
window.
Step 5: Connecting to your chosen mount
Installaon

13
Step 5 continued: Vent mount tting
Installaon
First, detach the mounting board from the windowscreen
mount by undoing the locking lever (MG.2) until it comes loose
from the mount. This should then allow you to pull the mount
suction part away from the mounting board from the roller ball
connection.
The mounting board will now be separated from the mount and
ready to connect to the venting mount.
To secure the mounting board and venting mount, simply push
the roller ball part of the vent mount into the connection on the
mounting board.
Now connect the mounting board mount to the DAB adapter.
On the mounting board of the mount, line up the back of the car
radio adapter clips to the clips of the mounting board.
Now slide the car radio adapter clips up into the clips of the
mounting board. Once they are connected, there will be a click
and bound securely to each other.
Now the mount and DAB adapter are connected, you can insert
the clips of the mount around the car vent to connect and begin
using your adapter.

14
Installaon
Step 6: Connecting the radio adapter to your car’s radio
You can connect your car via an AUX Cable connection or with
FM transmission. Follow the below guidance to set this up:
AUX Cable Line Out Connection
If your car has an AUX-in port, connect the AUX-in cable into the
AUX port in your car and into the ‘Line Out’ port (Ref.) at the
bottom of the radio adapter.
Ensure that your car audio system is reasonably low at this point,
as DAB car radio can sound loudly.
Now switch your radio adapter on and put it on DAB/DAB+
mode to get started.
FM Trx

15
Installaon
FM Trx Connection
If your car does not have an AUX-in port, or you would like a
wireless connection between your car and the radio adapter, you
can connect them via FM transmission from your car radio.
Click the ‘Mode’ button (Ref.) to ensure that the radio is in
DAB mode. Follow by pressing and holding the ‘FM Trx’ button
(Ref.) to begin searching for FM frequencies from your car’s
installed radio. The message “Searching Freqs... FM channels....”
will now display on the radio adapter display screen.
The radio will now begin searching for FM frequencies to
nd a channel with low levels of interference from local radio
broadcasts. Once the search is complete, the selected frequency
will display on the screen.

16
Instrucons Guide
Navigation Controls
Power button (Ref.): Press to switch your device ON/OFF.
Menu button (Ref.): When the radio is in working mode, press
the MENU button to display information for the DAB station
(page 10) or hold down the MENU button for a range of setting
options (page 24)
Mode button (Ref.): Select the MODE button to change
between the dierent modes: DAB/DAB+, AUX and Bluetooth.
Preset button (Ref.): Use to create or view preset stations.
Refer to guidance on pages 18-19.
FM Trx (Ref.): Use this button to set up wireless FM
transmission between the car radio and DAB adapter, as per the
guidance on page 15.
AUX-In (Ref.): Connect an AUX-in cable via the AUX-in port of
the DAB adapter to a device to play your own music.

17
Now that the DAB radio adapter is set up in your car, you can
begin listening to a wide variety of available stations.
Select the Mode button (Ref.) to ensure that you are on DAB
mode.“DAB+” will appear at the top of the screen when this
mode has been selected.
When you rst switch to DAB mode, the adapter will
automatically begin scanning for available DAB stations. This
scan will show on the display screen as “Scanning...”. Once the
scan is complete, a screen with all the available DAB stations in
your area will display.
To browse through stations, use the Navigation/OK dial (Ref.)
and rotate clockwise/anti-clockwise to browse. Once you nd
your station, either hover over the station for 3 seconds for the
station to automatically select, or press down the Navigation/
OK dial (Ref.) to conrm your option. The radio station will
then display on the screen along with the program type (e.g Pop
Music) and may display information regarding the DJ and show.
To change to a dierent station, simply twist the Navigation/
OK dial to go back to the DAB/DAB+ display screen and begin
scrolling through.
To adjust the volume, do this on the car radio within your car
rather than with the supplied DAB adapter.
Begin Listening To DAB/DAB+
Instrucons Guide

18
DAB/DAB+ Options
Perform a DAB scan:
If you would like to rescan for available DAB/DAB+ stations,
ensure that you are on DAB/DAB+ mode by selecting through
with the ‘MODE’ button (Ref.).
Follow by holding down the ‘MENU’ button (Ref.), followed
by selecting the ‘Auto Scan’ option with the Navigation/OK dial.
The DAB adapter will now begin scanning for available stations.
Once the scan is complete, available stations will show.
Setting DAB/DAB+ Presets
When listening to the desired DAB station, hold down the
‘PRESET’ button (Ref.) to be directed to the ‘Set Preset’ screen.
Use the Navigation/OK dial (Ref.) to scroll through between
preset numbers ‘01’ to ‘10’. If the preset number is empty, it will
display “01:Empty” etc. To select a preset number to save the
station under, press down the Navigation/OK button to set the
station.
Once the preset has been stored, the screen will display “Stored
Successfully”.
Instrucons Guide