MAJORITY LITTLE SHELFORD Manual

LSH-DAB-CRM
Instructions Guide
LITTLE
SHELFORD
PORTABLE DIGITAL RADIO

Box Contents ������������������������������������������������������������� 1
Controls And Funcons����������������������������������������������2
Support �������������������������������������������������������������������� 4
Instrucons Guide �����������������������������������������������������5
Basic Operaon �������������������������������������������������������� 5
DAB/DAB+ Radio������������������������������������������������������� 6
DAB/DAB+ Presets ���������������������������������������������������� 7
FM Radio������������������������������������������������������������������� 9
FM Radio Presets����������������������������������������������������� 10
Bluetooth Mode ������������������������������������������������������ 12
Sengs: Clock and Date ������������������������������������������ 13
Sengs: Dual Alarm Clock��������������������������������������� 14
Sengs: Alarm Funcons and Snooze��������������������� 15
Radio Sengs ���������������������������������������������������������� 17
Addional Features ������������������������������������������������� 18
Troubleshoong ������������������������������������������������������ 19
Specicaons ����������������������������������������������������������20
Warranty �����������������������������������������������������������������20
Safety Informaon��������������������������������������������������� 21
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majority.co.uk
Contents
3YEAR
WARRANTY

1
Box Contents
What’s in the Box?
Majority Little Shelford Radio
UK Standard Plug Power Supply
User Guide

2
Controls And Funcons
Top View/Control Buttons
Scan
Preset Enter/Snooze
Mode
Dimmer Info/Menu
8 7 6
1
9
4
5
2 3
1. Standby/Mode
2. Scan
3. Previous
4. Next
5. Enter/Snooze
6. Preset
7. Volume Dial -/+
8. Info/Menu
9. Dimmer

3
Controls And Funcons
Back View/Connections
14
13
10 11 12
10. On/O Power Switch
11. DC Power Input
12. 3.5mm Earphone Jack
13. Battery compartment
14. Aerial

4
Support
Thank you for your purchase of the Majority Little Shelford.
Please follow the guidance of the manual to set up your radio
and enjoy its fantastic variety of stations and features.
If you require further assistance with your new radio,
please contact our support team on the Majority website:
https://www.majority.co.uk/support/
Support

5
Instrucons Guide
Basic Operation
Please note all (Ref.) refer to Page 2-3 Controls and Functions mapping guide.
Starting up your radio
Plug the adaptor connector into the back of the system
labelled ‘DC in’ and turn the power on from the mains (Ref.).
Alternatively, insert 4 x AA batteries rather than using the above
process for mains power. (Ref.)
Ensure the antenna (Ref.) is extended as far as possible so that
you can rotate it. This will enable you to get the best signal you
can.
Switch the button on the rear of the unit to “on” (Ref.) and the
screen will show“Welcome to Digital Radio”.
From the “Welcome to Digital Radio”screen, click the ‘Standby/
Mode’ button (Ref.) to switch your radio on. At this point, you
will be required to select your chosen radio language.
When DAB mode is activated for the rst time, a scan will
automatically commence, or will play the last station before the
unit was turned o.
Select ‘Standby/Mode’ (Ref.) to switch between DAB, FM and
Bluetooth.
Standby
To change your radio back to standby, press and hold the
‘Standby/Mode’ (Ref.) button . To turn your radio o completely,
switch the On/O button at the back of the unit to ‘O’ (Ref.).

6
Instrucons Guide
DAB/DAB+ Radio
Fully extend the antenna (Ref.) to ensure that the best signal
can be received before scanning.
From the “Welcome to Digital Radio”screen, click the ‘Standby/
Mode’ button (Ref.) and your radio will automatically scan for
DAB stations. On rst use it will automatically scan all stations
and save them, and also synchronize the time and date of the
station.
If the unit hasn’t automatically scanned or you would like to
rescan the available stations, press the ‘Scan’ button (Ref.) and
then release. This would be advisable to repeat on DAB mode if
you are having trouble listening to particular stations.
By pressing the Scan button, the radio will scan for available
stations up the frequency band and store all stations that have
a good signal. After searching has nished it will automatically
play the rst station stored.
To select a dierent station, use the‘<<’ (Ref.) or ‘>>’ (Ref.)
buttons to nd your desired station. Select the station by
clicking the ‘Enter/Snooze’ (Ref.) button.
Please note that DAB mode is not indicated by displaying “DAB”
on the screen, instead the rst available staton will display with
rolling text information.
Rescanning DAB Stations
When on DAB mode, press the ‘Scan’button (Ref.) to rescan
for available DAB stations in your area. The radio will now begin
scanning for DAB stations with the screen displaying “Full Scan.”

7
Instrucons Guide
DAB/DAB+ Presets
Storing DAB Stations
You can store up to 10 DAB radio stations for easy navigation.
To store a station that you are currently playing:
Press and hold the ‘Preset’ (Ref.) button for 2-3 seconds until
the Preset Store settings open and the display shows “Preset
Store<x:(Empty)>”. Release the “Preset” button.
Press the ‘<< ‘ or ‘>>’ button (Ref./4) to change the “<1” to the
number you want to store the station as. Then press‘Enter/
Snooze’ (Ref.) button to save the station to that preset number.
The display will then show“Preset x stored”.
Note: If there is an existing DAB station stored under a preset, it
will be over written when you store the new station.
Recalling a DAB stored station
Press the ‘Preset’ (Ref.) button to open Preset Recall settings. Do
not hold down the button as this will open Preset Store settings.
Press the ‘<<’ or ‘>>’ button (Ref./4) to scroll through your
preset stations. Follow by pressing the ‘Enter/Snooze’ (Ref.)
button to select your choice and the station will begin playing.

8
Instrucons Guide
Station Information for DAB/DAB+ Radio
When you are listening to a DAB/DAB+ radio station with good
signal, you can press the ‘Info/Menu’ button (Ref.) repeatedly to
show the dierent programme information.
Signal Strength: Displays a signal bar with the strength of the
current station.
Bit Error Rate: Provides details of the signal error rate.
Channel and Frequency: Displays the station’s transmission
channel number and frequency.
PTY (Programme Type): Shows the type and description of the
program provided by the DAB station.
Time and Date: Displays the time and date information provided
by the broadcaster.
Bit Rate: The data rate which the signal is being transmitted.
Dynamic Label Segment (DLS): Displays scrolling text
information supplied by the broadcaster.

9
Instrucons Guide
FM Radio
Press the ‘Standby/Mode’ button (Ref.) multiple times to switch
between DAB, FM and Bluetooth. The rst time you switch to
FM mode, the FM frequency “87.5 MHz” will be displayed on the
screen.
Fully extend the antenna (Ref.).
To scan for the available stations with good signal up the
bandwidth, press the ‘Scan’button (Ref.) for the radio to begin
scanning up the frequency band. The next available station with
good signal will then begin to play.
To scan down the frequency band, press and hold the ‘Scan’
button (Ref.) for a few seconds for the station down the
frequency band with good signal.
How to tune a specic frequency manually
To listen to a specic frequency press and hold the ‘>>’ button
(Ref.) to search up the bandwidth quickly and hold the ‘<<’
button (Ref.) to search down quickly. It will stop searching
when the button is released.
To search slowly, press ‘<<’ or ‘>>’ (Ref./4) multiple times to
scroll through.
Stereo and Mono
When on FM mode, press the ‘Enter/Snooze’ button (Ref.) to
switch between Stereo and Mono mode.

10
Instrucons Guide
Storing FM Stations
You can store up to 10 FM radio stations for easy navigation.
To store a station that you are currently playing:
Press and hold the ‘Preset’ (Ref.) button for 2-3 seconds until
the Preset Store settings open and the display shows “Preset
Store<x:(Empty)>”. Release the ‘Preset’ button.
Press the ‘<< ‘ or ‘>>’ button (Ref./4) to change the “<1” to the
number you want to store the station as. Then press‘Enter/
Snooze’ (Ref.) button to save the station to that preset number.
The display will then show“Preset x stored”.
Note: If there is an existing FM station stored under a preset, it
will be over written when you store the new station.
Recalling a FM stored station
Press the ‘Preset’ (Ref.) button to open Preset Recall settings. Do
not hold down the button as this will open Preset Store settings.
Press the ‘<<’ or ‘>>’ button (Ref./4) to scroll through your
preset stations. Follow by pressing the ‘Enter/Snooze’ (Ref.)
button to select your choice and the station will begin playing.
FM Radio Presets

11
When you are listening to an FM radio station with good signal,
you can press the‘Info/Menu’button (Ref.) repeatedly to show
the dierent programme information.
PTY (Program Type): Shows the type and description of the
program provided by the DAB station.
Signal Strength: Displays a signal bar with the strength of the
current station.
Time and Date: Displays the time and the date.
Frequency: Displays the station’s transmission frequency.
Audio Type: Displays the audio type of the station you are
listening to. It will either be Stereo or Mono.
Radio Text: Displays scrolling text information supplied by the
broadcaster.
Instrucons Guide
Station Information for FM Radio

12
Bluetooth Mode
Instrucons Guide
Setting Up Bluetooth
To choose Bluetooth mode, press the‘Standby/Mode’button
(Ref.) repeatedly until Bluetooth mode is selected.
Go to Bluetooth settings on your device and ensure that it is
switched on. “Majority Little Shelford”should then display in
available devices. Select this option to connect to it and it should
display “Connected”.
To choose the music you wish to play, you will need to choose
the album or playlist from your device.
The volume, next or previous track can be changed from your
device or from the unit using the Volume dial (Ref.) or the ‘<<’
and ‘>>’ buttons (Ref./4).
The operational range between the unit and a Bluetooth device
is approximately 10 meters without any obstructions.

13
Instrucons Guide
Settings: Clock and Date
Manually Setting the Time
Ensure the unit is in working mode (i.e. listening to DAB/FM
Radio). Press and hold the ‘Info/Menu’ button (Ref.) for 1-2
seconds to open the‘Set Menu’option.
Use the ‘<<’ or ‘>>’ (Ref./4) buttons to choose your option and
select Time/Date by pressing‘Enter/Snooze’ (Ref.).
The hour digit will now ash. Press ‘<<’ or ‘>>’ to scroll through
to the correct hour. Press ‘Enter/Snooze’ to conrm.
Once this is conrmed, you will be able to press ‘<<’ or ‘>>’ to
select the minutes. Press ‘Enter/Snooze’ to conrm.
Manually Setting the Date
After setting the time (per instructions above) the year will now
ash. Press ‘<<’ or ‘>>’ (Ref./4) to scroll through to the correct
year. Press‘Enter/Snooze’ to conrm (Ref.).
Once this is conrmed, you will be directed to the month. To
change the month, use the ‘<<’ and ‘>>’ buttons (Ref./4). Press
‘Enter/Snooze’ to conrm (Ref.)
Once this is conrmed, you will be able to press ‘<<’ or
‘>>’(Ref./4) to select the Date. Press ‘Enter/Snooze’ to conrm
(Ref.).

14
Instrucons Guide
Settings: Dual Alarm Clock
Alarm Setting
Ensure the unit is in working mode (i.e. listening to DAB/FM
Radio). Press and hold the ‘Info/Menu’ button (Ref.) for 1-2
seconds to open the‘Set Menu’option.
Scroll through using the‘<<’ or ‘>>’ buttons (Ref./4) to nd
the “Alarm 1 Set” or “Alarm 2 Set” option and select a choice by
pressing ‘Enter/Snooze’ to conrm (Ref.).
To turn the alarm on or o, press ‘<<’ or ‘>>’ button (Ref./4),
so that “ON” is ashing and press the ‘Enter/Snooze’ button to
conrm.
The hour digits for the alarm will ash, press‘<<’ or ‘>>’ button to
change the hour and press the ‘Enter/Snooze’ button to conrm.
From this you will then be able to change the minutes, volume,
desired alarm sound (e.g alarm, DAB or FM) following by
selecting ‘Enter/Snooze’.
The last option for setting your alarm is to select “Alarm Mode”
and choose between having your alarm 1/2 to play Once, Daily,
Weekends or Weekdays only.
Note: You can press the “Info/Menu” button to get back to the previous step
when programming the alarm. When Alarm sounds, if no operation, it can
last for one hour.

15
Instrucons Guide
Settings: Alarm Functions and Snooze
Turn o the Alarm when sounding
To turn o the Alarm 1 or Alarm 2 when it sounds, press any
of the buttons on the display screen except the ‘Enter/Snooze’
(Ref.) button. This will then cancel the alarm set.
If the alarm is set to be “Weekday”, “Weekend” or “Daily” then the
alarm icon will still display on the standby display screen for the
alarm set for the next day.
If it was set to “Once” then the alarm icon will disappear from the
display screen after sounding.
How to cancel your alarm
Follow the guidance to setting your alarm, but instead of using
the ‘<<’ or ‘>>’ buttons to turn the alarm ON, instead scroll to
OFF. Conrm the selection by pressing‘Enter/Snooze’.
Snooze Function
When the alarm sounds, press the‘Enter/Snooze’ button (Ref.)
to delay the alarm for another 9 minutes and the radio will go
into Standby mode.
To take the radio o of Snooze or to stop sounding the Snooze
alarm, press any of the buttons except the ‘Enter/Snooze’
button.

16
Instrucons Guide
Settings: Sleep Timer
Ensure the unit is in working mode (i.e. listening to DAB/FM
Radio). Press and hold the ‘Info/Menu’ button (Ref.) for 1-2
seconds to open the“Set Menu”option.
Scroll through using the‘<<’ or ‘>>’ buttons (Ref./4) to nd the
“Sleep Set” option and select it by pressing‘Enter/Snooze’ to
conrm (Ref.).
The screen will now display “Set Sleep: OFF”. Now use the ‘<<’
and ‘>>’ buttons to browse through a range of sleep timer
lengths: 120/90/60/45/30/15/5 minutes or OFF.
When your choice is displayed, press the ‘Enter/Snooze’ button
to conrm (Ref.). The system will automatically start the timer.
To turn the sleep timer o, follow the above instructions and
select “OFF” from the choices.
Once the timer has been set, the minutes will countdown on
the display screen. For example, if set to turn o in 5 minutes,
“S5” will ash, counting down to “S0” when the radio will go into
standby mode.

17
Instrucons Guide
Radio Settings
When the radio is turned on, press and hold the ‘Info/Menu’
(Ref.) button. This will open “Set Menu”and display these
settings:
Factory Reset:
Press the ‘<<’ or ‘>>’ button (Ref./4) in the “Set Menu” screen to
scroll through to the sub-option of “Factory Reset”.
Press the ‘Enter/Snooze’ button and the display will show
“Factory reset?” Press the ‘<<’ or ‘>>’ button to select “Yes”or “No”.
Then re-press the ‘Enter/Snooze’ button (Ref.) to conrm your
desired option.
System Version:
Press the ‘<<’ or ‘>>’ button (Ref./4) in the “Set Menu” screen to
scroll through to the sub-option of “System Version”.
Press the ‘Enter/Snooze’ button to check the system version
information.
Language:
Press the ‘<<’ or ‘>>’ button (Ref./4) in the “Set Menu” screen to
scroll through to the sub-option of “Language”.
Press the ‘Enter/Snooze’ button to select your chosen language
between English, French, Italian and Spanish.

18
Instrucons Guide
Additional Features
Dimmer
Select the ‘Dimmer’ button (Ref.9) repeatedly to scroll through a
range of dimmer settings for the radio display screen.
Headphone Jack:
Plug in your earphones via the 3.5mm headphone jack (Ref.)
to listen to audio from your radio.
Please note that Bluetooth earphones are not compatible with
this device.
Power Supply and Batteries:
The unit is powered and charged byUK Standard Plug USB 5V
1A and is also portable when powered by 4 x AA batteries (not
supplied). These can be inserted into the battery compartment
at the back of the unit.