MAJORITY LNG-DAB-BLK User manual

User Guide
Majority Longstanton
DAB / DAB+ / FM Radio
LNG-DAB-BLK

Contents
Controls and Functions .............................................................
What’s in the box? .........................................................................
Instruction Guide ..........................................................................
Basic Operation .............................................................................
DAB Radio ........................................................................................
Set Up of the DAB Radio Preset Stations .........................
FM Radio ...........................................................................................
Set Up of the FM Radio Preset Stations ............................
Station information for DAB and FM Radio ....................
Clock and Date Setting .............................................................
Dual Alarm Setting and Alarm Snooze .............................
Other Functions .............................................................................
Technical Specications ...........................................................
Warranty .............................................................................................
Trouble Shooting Guide............................................................
Important Safety Information .............................................
1
3
4
4
5
6
7
9
10
12
14
16
19
19
20
21

Controls and Funcons
Top View
1. Standby/Mode
2. Info/Menu
3. Preset
4. Previous
5. Enter/Scan
6. Next
1
7. Alarm
8. Sleep
9. Snooze
10. Dimmer
11. Volume-
12. Volume+

Controls and Funcons
Back View
13. Antenna
14. Headphone Input
2
17. Display Screen
15. DC 5V In
16. USB Output
Front View

What’s in the box?
Majority Longstanton DAB / DAB+ /FM Radio
Clock UK Standard Plug DC5V 2A Power Supply
User Guide
3

Please note all (Ref.) refer to Page 1 Controls and Functions mapping guide.
Basic Operaon
Plug the connector into the back of the system labelled DC 5V
(Ref.15) and the power supply into the mains.
Ensure the antenna (Ref.13) is extended as far as possible so
that you can rotate it. This will enable you to get the best signal
possible.
Press the ‘Standby/Mode’ button to turn on the unit (Ref.1). It
will automatically take you to DAB radio mode or to the previous
mode that you were using. When DAB Radio is activated for the
rst time it will automatically start scanning and storing all
stations that have a good signal. If scanning does not
automatically start, press and hold the ‘Enter/Scan’ button
(Ref.5). To scroll through the stations use the ‘Previous’ or ‘Next’
buttons (Ref.4/6). Press the ‘Enter/Scan’ buttons (Ref.5) to listen
to a station.
To change the mode, press the ‘Standby/Mode’ button (Ref.1).
This will switch between DAB Radio, FM Radio.
Standby
To place the music system in standby, press the ‘Standby/Mode’
button (Ref.1). To turn o fully, press and hold the ‘Standby/
Mode’ button (Ref.1) and switch o at the mains. The cord must
be out of reach of children.
Instrucons Guide
4

DAB / DAB+ Radio
Press the ‘Standy/Mode’ button (Ref.1) to switch to DAB Radio.
On rst use it will automatically scan all stations and save them.
Fully extend the antenna (Ref.13).
To auto scan, press and hold the ‘Enter/Scan’ button (Ref.5) and
then release. This will start scanning up the frequency band and
store all stations that have good signal.
The radio will automatically save all the stations with a strong
signal, up to 240 MHz. After searching has nished it will
automatically play the rst station stored.
To listen to all stations that have been stored use the ‘Previous’
and ‘Next’ buttons (Ref.4/6) to scroll through. Press the‘Enter/
Scan’ button (Ref.5) when on the required station.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.2). Press multiple times to view all
information available (See page 10).
When you turn the radio on again after it switching o, it will
automatically tune to the same station (DAB or FM) that was
last selected.
In DAB mode, the radio will synchronize with the time and date
of the station.
Instrucons Guide
5

How to store a preset station
Up to 10 stations can be set.
To store a station that you are currently playing:
Press and hold ‘Preset’ button (Ref.3). “<1: (Empty)” will show on
the display.
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to change the “<1”
to the number you want to store the station as. Then press the
‘Enter/Scan’ button (Ref.5) to save. The display will then show
“Preset [1] stored”.
How to play a preset radio station
Press the ‘Preset’ button (Ref.3).
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to scroll through
your preset stations. You can store up to 10.
Press ‘Enter/Scan’ button (Ref.5) to select your choice.
Instrucons Guide
6

Instrucons Guide
FM Radio
Press the ‘Stanby/Mode’ button (Ref.1) multiple times to switch
between DAB and FM. The rst time you do this, the FM
frequency “87.5 MHz” will be displayed on the screen.
Fully extend the antenna (Ref.13).
To auto scan, press and hold then release the ‘Next’ button
(Ref.6). This will start scanning up the frequency band and play
the rst station it nds with a strong signal.
To scan down the frequency band, press and hold the ‘Previous’
button (Ref.4) for a few seconds.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.2). Press multiple times to view all
information available (See page 11).
FM Scan Setting
Choose between scanning strong and weak signals (All) or only
the strong stations (Only).
Press and hold the ‘Info/Menu’ button (Ref.2). To make your
choice, use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to choose
your option.
Select “FM Scan Set” and press the ‘Enter/Scan’ button (Ref.5).
Use the ‘Previous’ or ‘Next’ button (Ref.4/6) to choose between
“All” or “Only”. Press the ‘Enter/Scan’ button (Ref.5) to conrm
your choice. 7

To tune a specic frequency manually
To listen to a specic frequency use the ‘Previous’ or ‘Next’
buttons (Ref.4/6) to search forward or back.
Mono and Stereo
In working mode, press the ‘Enter/Scan’ button (Ref.5), press
mutiple times to switch between‘Set to Mono’ or ‘Set to Stereo.
Instrucons Guide
8

Instrucons Guide
How to store a preset radio station
Up to 10 stations can be set.
To store a station that you are currently playing:
Press and hold ‘Preset’ button (Ref.3). “<1: (Empty)” will show on
the display.
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to change the “<1”
to the number you want to store the station as. Then press the
‘Enter/Scan’ button (Ref.5) to save. The display will then show
“Preset [1] stored”.
How to play a preset radio station
Press the ‘Preset’ button (Ref.3).
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to scroll through
your preset stations. You can store up to 10.
Press ‘Enter/Scan’ button (Ref.5) to select your choice.
9

Instrucons Guide
Staon informaon for DAB and FM Radio
DAB / DAB+ Radio
Press the ‘Info/Menu’ button (Ref.2) repeatedly to show the
different programme information.
Signal Strength: Displays a signal bar with the strength of the
current station.
Bit Error Rate: Provides details of the signal error rate.
Channel and Frequency: Displays the station’s transmission
channel number and frequency.
PTY (Programme Type): Shows the type and description of
the programme provided by the DAB station.
Time and Date: Displays the time and date information
provided by the broadcaster.
Bit Rate: The data rate which the signal is being transmitted.
Dynamic Label Segment (DLS): Displays scrolling text
information supplied by the broadcaster.
10

FM Radio
Press the ‘Info/Menu’ button (Ref.2) repeatedly to show the
dierent programme information.
Programme Type: Displays a description of the type of
programme provided by the broadcaster.
Signal Strength: Displays a signal bar with the strength of the
current station.
Time and Date: Displays the time and the date.
Frequency: Displays the station’s transmission frequency.
Audio Type: Displays the audio type of the station you are
listening to. It will either be stereo or mono.
Radio Text: Displays scrolling text information supplied by the
broadcaster.
11
Instrucons Guide

Manually Setting the Time
The time will automatically update after the rst use of DAB
Radio. However, you can still set the time manually.
Ensure the unit is turned on.
Press and hold the ‘Info/Menu’ button (Ref.2).
To make your selection, use the ‘Previous’ or ‘Next’ buttons
(Ref.4/6) to choose your option.
Select “Time/Date” and press the ‘Enter/Scan’ button (Ref.5).
The hour will ash on the display screen.
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6), press until the
required hour is displayed.
To conrm the hour, press the ‘Enter/Scan’ button (Ref.5).
The minutes will ash on the display screen.
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6), press until the
required minutes is displayed.
To conrm the minute, press the ‘Enter/Scan’ button (Ref.5).
The time is now set.
12
Instrucons Guide

Manually Setting the Date
The date can be changed after changing the time.
The year will ash on the display screen. Use the
‘Previous’ or ‘Next’ buttons (Ref.4/6), press until the
required year is displayed.
To conrm the year, press the‘Enter/Scan’ button (Ref.5).
The month will ash on the display screen. Use the ‘Previous’
or ‘Next’ buttons (Ref.4/6), press until the required month is
displayed.
To conrm the month, press the‘Enter/Scan’ button (Ref.5).
The day will then ash on the display screen. Use the ‘Previous’ or
‘Next’ buttons (Ref.4/6), press until the required date is
displayed.
To conrm the date, press the ‘Enter/Scan’ button (Ref.5).
13
Instrucons Guide

Dual Alarm Setting
Press and hold the ‘Alarm’ button (Ref.7).
To make your selection, use the ‘Previous’ or ‘Next’ buttons
(Ref.4/6) to choose your option.
Select “Alarm 1 Set” and press the ‘Enter/Scan’ button (Ref.5).
To turn the Alarm on or o, use the ‘Previous’ or ‘Next’ buttons
(Ref.4/6) to select “ON” and press the ‘Enter/Scan’ button (Ref.5)
to conrm.
The hour digits for the alarm will ash. Use the ‘Previous’ or ‘Next’
buttons (Ref.4/6) to change the hour and press the ‘Enter/Scan’
button (Ref.5) to conrm.
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to change the
minutes and press the ‘Enter/Scan’ button (Ref.5) to conrm.
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to change the
volume and press the ‘Enter/Scan’ button (Ref.5) to conrm.
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to change between
which sound you would like: Alarm, DAB or FM Radio and press
the ‘Enter/Scan’ button (Ref.5) to conrm.
To set Alarm 2, follow Alarm 1 instructions but scroll through and
select ‘Alarm 2 Set’.
NOTE: You can press the ‘Info/Menu’ (Ref.2) button to go back to
the previous step when programming the alarm.
14
Instrucons Guide

To turn o Alarm 1 or Alarm 2
Press and hold the ‘Info/Menu’ button (Ref.2).
To make your selection, use the ‘Previous’ or ‘Next’ buttons
(Ref.4/6) to choose your option.
Select “Alarm 1 Set/Alarm 2 Set” and press the ‘Enter/Scan’ button
(Ref.5).
To turn the Alarm on or o, use the ‘Previous’ or ‘Next’ buttons
(Ref.4/6) to select “OFF” and press the‘Enter/Scan’ button (Ref.5)
to conrm.
15
Alarm Sound and Snooze
Snooze/Switch o Alarm when Sounding
When the alarm sounds, press the ‘Snooze/Dimmer’ button
(Ref.9/10) to snooze for 9 minutes. The radio will go into standby
mode.
To turn the alarm o completely when sounding, press any
of the following buttons: ‘Standby/Mode’ (Ref. 1), ‘Info/Menu’
(Ref.2), ‘Preset’ (Ref.3), ‘Previous’ (Ref.4), ‘Enter/Scan’ (Ref.5) or
’Next’ (Ref.6).
Instrucons Guide

16
Other Funcons
Sleep Setting
This enables you to programme the radio to switch o at a
specic time, up to 120 minutes from activation.
Press and hold the ‘Sleep’ button (Ref.8).
To make your selection, use the ‘Previous’ or ‘Next’ buttons
(Ref.4/6) to choose your option.
Select “Sleep Set” and press the ‘Enter/Scan’ button (Ref.5).
Choose from 120 mins/90 mins/60 mins/45 mins/ 30 mins/15
mins/5 mins or OFF using the ‘Previous’ or ‘Next’ buttons
(Ref.4/6).
When your choice is displayed press the ‘Enter/Scan’ button
(Ref.5). The system will automatically start the timer.
To turn the sleep timer o, follow the above instructions and
select “OFF”from the choices.
Once the timer has been set, the minutes will countdown on the
display screen. For example, if set to turn o in 5 minutes “S5” will
ash, counting down to “S0” then the radio will go into standby
mode.
Instrucons Guide

17
System Reset
Press and hold the ‘Info/Menu’ button (Ref.2).
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to select “Factory
reset” and press the ‘Enter/Scan’ button (Ref.5). The display
screen will show “Factory reset”.
Use the ‘Previous’ or ‘Next’ button (Ref.4/6) to select “Yes” or “No”.
Press the ‘Enter/Scan’ button (Ref.5) to conrm.
System Version – System Version Display
Press and hold the ‘Info/Menu’ button (Ref.2).
Use the ‘Previous’ or ‘Next’ buttons (Ref.4/6) to select “System
Version”.
Press the ‘Enter/Scan’ button (Ref.5) to conrm.
Instrucons Guide

18
USB
Mobile devices can be charged via the USB Port (Ref.16) on the
back of the unit (USB lead not supplied).
Brightness
In working mode, press the ‘Snooze/Dimmer’ button (Ref.9/10)
multiple times to change between three dierent brightness
levels or O.
NOTE: If you set the display to O please note that when you
switch into standby and then switch on again the screen will be
o but the radio will still be functioning. Press the ‘Snooze/
Dimmer’ button (Ref.9/10) to view the information on the
screen.
Instrucons Guide