MAJORITY PARKSIDE GO Manual

PAGO-DAB-BLK
Digital Pocket Radio with SD Card Playback
MAJORITY
PARKSIDE GO
Instrucons Guide

What’s in the Box?..................................................... 1
Controls And Funcons..............................................2
Navigaon Controls .................................................. 4
Basic Operaon .........................................................5
Instrucons Guide .................................................... 6
DAB/DAB+ Mode ������������������������������������������������������ 6
DAB Funcons ���������������������������������������������������������� 7
DAB Sengs ������������������������������������������������������������� 9
FM Radio������������������������������������������������������������������ 10
FM Funcons ������������������������������������������������������������11
FM Sengs �������������������������������������������������������������� 13
Micro SD Card Playback ������������������������������������������� 14
Radio Sengs ���������������������������������������������������������� 15
Troubleshoong ...................................................... 18
Specicaons .......................................................... 19
Warranty ................................................................. 19
Safety Informaon...................................................20
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majorityradios.co.uk
Contents
3YEAR
WARRANTY

1
What’s in the Box?
Box Contents
Majority Parkside Go Pocket DAB/DAB+ Radio
USB cable
Earphones
User Guide

2
Controls And Funcons
PRESET
SELECT
1
2
3
4
Front View / Control Buttons
1. Screen
2. Select/Preset/Pause/Play button
3. Fastforward/Next
4. Rewind/Previous

3
Controls And Funcons
Side View / Control Buttons
5. DC in 5V
6. Mode/Key
7. Menu/Info
8. MicroSD Card slot
9. Volume +
10. Power (On/O)
11. Volume -
12. Earphone jack
6
8
9
10
11
12
5
7
T-Flash

4
Navigation Controls
ON/OFF button
To turn your radio on, press the ON/OFF button.
To turn your radio o, press and hold the ON/OFF button.
Next/Previous buttons
Use the Next and Previous buttons to navigate around the
radio and browse through your selections and stations
available.
In FM mode these buttons can be held down to autoscan
to the next or previous available stations.
Mode/Key
Switch between DAB/FM/MP3 using the mode button.
In these modes you can browse through DAB and FM
settings and also gain access to the radio settings.
Hold down button to unlock/lock your radio
Menu/Info button
Select repeatedly for station information and radio setting
options.
Vol -/Vol +
Control the volume of the radio.
Instrucons Guide

5
Ensure that the radio has been charged and view the
battery life on the display when you turn it on. If the
battery icon shows all of the bars illuminated then the
system is fully charged.
To charge the device, use the USB cable provided and plug
it into a computer or a plug (not supplied) that accepts
USB connectors. Plug this into the radio USB charging port
(Ref.)
Also ensure that the earphones are connected (Ref.)
into the top of the system correctly as they are also the
antenna of your radio. Without them, no DAB/FM signal
will be received.
Turn the radio on by pressing the ‘ON/OFF’ button (Ref.)
on the side of the radio. “Welcome to Digital Radio” will
then show on the display.
The radio will then automatically begin scanning for
available DAB stations. The radio will display “Searching...”
and may take a few minutes to scan.
The signal bar will now display on the top right of the
radio screen. If there are no bars, there may be issues with
getting a good connection to stations.
Instrucons Guide
Basic Operation

Press the ‘ON/OFF’ button (Ref.). On rst use, DAB radio
will automatically start scanning all stations and save
them.
To auto scan (if the unit has not automatically done so, or
shows no signal), ensure that the radio is in DAB mode by
using the ‘Mode/Key’ button (Ref.). Follow this by holding
the ‘Menu/Info’ button (Ref.) and the screen should then
display “DAB <FULL SCAN>”. Press ‘Select/Preset/Play/
Pause’ (Ref.) to conrm this.
The unit will then start scanning up the frequency band
and store all stations that have a good signal. Please note:
ensure that you are in an area with signal bars displaying.
The radio will automatically save all those stations that
have a strong signal. After searching has nished it will
automatically play the rst station stored.
To listen to any of the stations that have been stored, use
the ‘Next’ and ‘Prev’ buttons (Ref. 3/4) to navigate through
the stations. Press ‘Select/Preset’ to make your station
selection.
When you turn the radio on it will automatically tune to
the same station (DAB, FM or MP3) that was last selected.
6
DAB/DAB+ Mode
Instrucons Guide

DAB Functions
How to preset a radio station
Up to 10 preset stations can be set. To store a station that
you are currently playing:
To make your rst preset station, press and hold the
‘Select/Preset/Play/Pause’ button (Ref.) until “Preset Store
<1: (Empty)” shows on the screen.
Select Preset 1 for the chosen station by pressing ‘Select/
Preset’ to conrm.
The display will then show “Preset 01 Stored”.
To set more preset stations, repeat the above process but
use the ‘Previous’ or ‘Next’ buttons (Ref./4) when you are
at the preset store number selection stage to change the
number you want to store the station as.
How to play a preset radio station
Press the ‘Select/Preset/Play/Pause’ button (Ref.) to
display “Preset Recall” settings.
Use the ‘Previous’ or ‘Next’ button (Ref./4) to scroll through
your preset stations.
Press the ‘Select/Preset/Play/Pause’ button to select your
choice.
7
Instrucons Guide

8
Instrucons Guide
DAB Station Information
When on a DAB station with signal, you are able to nd out
station information available. Press the ‘Menu/Info’ button
(Ref.) repeatedly to show the programme information.
Signal Strength Bar: Displays a signal bar with the
strength of the current station
PTY (Programme Type): Shows the type and description
of the programme provided by the DAB station.
DAB Multiplex: Shows DAB multiplex for that station
Channel number and Frequency: Displays the station’s
transmission channel number and frequency
Signal Error: Provides details of the signal error rate
Bit Rate: The data range which the signal is being
transmitted
Time: Displays the time
Date: Displays the date
Dynamic Label Segment (DLS): Displays scrolling text
information supplied by the broadcaster