Makeblock N65DV User manual

Starter Robot Kit
Robot Tank
Three-Wheeled Robot Car
IR Version
MAKER WORKS TECHNOLOGY INC
No. 426, F/4, Gonglehuating Business Building, Xinhu Road,
Xixiang Sub-district, Bao’an District, Shenzhen, 518102 China.
Please contact with us if you need some
technique support: [email protected]
www.makeblock.cc

6× Nylon Stud M4×30
4× Plastic Rivet R4060
4× Plastic Rivet R4120
4× Plastic Ring 4×7×2mm
2× DC Motor-25
1× Makeblock Orion
1× Me Ultrasonic Sensor
1× Me Infrared Receiver Sensor
1× Me IR Remote Controller
1× Micro USB cable
1× 6P6C RJ25 Cable-20cm
1× 6P6C RJ25 Cable-35cm
2× Shaft Collar 4mm
4× Flange Bearing 4×8×3mm
2× BaseBracket
1× Battery Holder for (6) AA
1× Hex Screwdriver
1× Cross Screwdriver
2× Hex Allen Key
1× Wrench
22× Screw M4×8
14× Screw M4×14
3× Nut M4
1× Nut M8
4× Headless Set Screw M3×5
4× Screw M3×8
1× Beam 0824-96
1× Beam 0824-128
2× Beam 0824-144
1× Bracket 3×3
1× Plate 3×6
1× Bracket P3
1× Caster Wheel
2× DC Motor-25 Bracket
2×
4× Timing Pulley 90T
2× Tire 68.5×22mm
38× Track
38× Track Axle
2×
Shaft Connector 4mm
Parts List Pictures for reference only
Please visit
http://learn.makeblock .cc/starter robot kit/
to view the programming guide.
1
Robot Tank
Threaded Shaft 4×39mm
10
Three-wheeled Robot Car Programming Guide 21
Contents Pictures for reference only

1 2
Building the Robot Tank
2× Screw M4×14
2× 2× 2× 4× 2× 4× 2×4×
12

4
2× 4×
3
4×1×
4× Screw M4×14
2× Screw M3×8
2×2×
2× Screw M4×14
345
2×

5 6
38× 38×
6784× Plastic Rivet R4120
1× 4×1× 1×

7 8
2×1×
2× Plastic Rivet R4060
2× Screw M4×8
8× Screw M4×8
1× 2× 2×
9 10 11
1× 1× 1× 6× 2× 12×
2× Plastic Rivet R4060
4× Screw M4×8
DC Motor-25(Left)
DC Motor-25(Right)
2× Screw M4×14
Threaded slot

9 10
Building the Three-Wheeled Robot CarWiring and Programming
You may need to switch the order of two
wires to correct the rotation direction.
To reduce the electromagnetic interference,
Please consider to add the magnetic ring to
the wire which connnected to motors.
Me IR Remote Controller
Me Ultrasonic Sensor
DC Motor-25(Left)
DC Motor-25(Right)
Makeblock Orion
?
Me Infrared Receiver Sensor
Battery Holder

1211
3
1
2× 4× 2×2×
2× Screw M3×8
2
2× Screw M4×14
Screw M4×14
6× Screw M4×8
1×2× 1× 2× 6× 1×
4×2× 1×
Threaded slot
Threaded slot

13 14
5
4×
4× Screw M4×8
2×
4

7
15 16
2×1×
6
1×
1× 2×
2× Plastic Rivet R4060

1× 1× 1× 6× 2× 12×
89
17 18
1× 4×1×
2× Plastic Rivet R4060
4× Screw M4×8
4× Plastic Rivet R4120
8× Screw M4×8
DC Motor-25(Left)
DC Motor-25(Right)

You can build more on Makeblock
20
XY Plotter 3D Printer
Robotic Arm
Wiring and Programming
You may need to switch the order of two
wires to correct the rotation direction.
To reduce the electromagnetic interference,
Please consider to add the magnetic ring to
the wire which connnected to motors.
Me IR Remote Controller
Me Ultrasonic Sensor
DC Motor-25(Left)
DC Motor-25(Right)
Makeblock Orion
?
Me Infrared Receiver Sensor
Battery Holder
19

Programming Guide
21
Working with Scratch
--Hack the Physical World
Makeblock platform supports graphical programming language Scratch, you can simply
drag and joint the blocks to run your creations without difficult coding.
Visit the following URL for more details:
http://learn.makeblock.cc/learning-scratch
Scratch is a programming language and online community where you can create your own interactive stories, games, and
animations -- and share your creations with others around the world. In the process of designing and programming Scratch
projects, young people learn to think creatively, reason systematically, and work collaboratively. Scratch is a project of the
Lifelong Kindergarten group at the MIT Media Lab. It is available for free at http://scratch.mit.edu
Makeblock Orion Driver Installation
The USB interface of Makeblock Orion uses the chip CH340,you may need to install the
chip CH340 drivers manually.
22
Visit the following URL for more details:
http://learn.makeblock.cc/driver_installation/
If you want to creat advanced and
customized programs, please refer
to this part.

Working with Arduino IDE
––Learn Programming the Fun Way
Learn and play at the same time!
Enjoy it your own way.
Visit the following URL for more details:
http://learn.makeblock.cc/learning
-Arduino
Ard uino i s an o pen- source el ectroni cs
prototyping platform based on flexible, easy-
to-use hardware and software.The Arduino
so ft wa re c on si sts of a de velo pme nt
environment (IDE) and the core libraries. The
IDE is written in Java and based on the
Processing development environment. The
core libraries are written in C and C++ and
compiled using avr-gcc and AVR Libc.
23
Visit the following URL for more details:
http://learn.makeblock.cc/learning-APP
Working with the Makeblock App
––Construct It Once, Control It Everywhere
Install the Makeblock app to control your creations with your Android or iOS device.
Construct Your Dreams