Makita UB001C User manual
UB001C
EN Battery Powered Blower INSTRUCTION MANUAL 9
FR MANUEL D’INSTRUCTIONS 18
DE BETRIEBSANLEITUNG 27
IT ISTRUZIONI PER L’USO 37
NL GEBRUIKSAANWIJZING 46
ES
Batería
MANUAL DE
INSTRUCCIONES 55
PT MANUAL DE INSTRUÇÕES 64
DA BRUGSANVISNING 73
EL 82
TR KULLANMA KILAVUZU 92
2 3
11
1 2
2
1
1
3
2
2
3
1
4
2
1
2
1
2
2
1
2
3
1
2
3
1
2
1
3
1
1
2
1
1
1
2
2
1
4
1
1
2
1
2
2
1
1
2
5
1
2
3
1
1
6
1
1
1
1
7
15m (50ft)
1
1
8
9ENGLISH
SPECIFICATIONS
Model: UB001C
Capacities Air volume 0 - 17.6 m3/min
Air speed (average) 0 - 58.0 m/s
Air speed (max.) 0 - 70.0 m/s
Overall length (with end nozzle) 960 mm / 1,010 mm / 1,060 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 2.6 - 2.9 kg
Protection degree IPX4
•
• Weight according to EPTA-Procedure 01/2014
PDC1200 / PDC01
WARNING:
Take particular care and attention.
Read instruction manual.
accident.
Do not expose to moisture.
Ni-MH
Li-ion
Do not dispose of electric equipment or
material!
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
-
-
-
ing to EN50636-2-100:
Sound pressure level (LpA) : 83.4 dB(A)
Sound power level (LWA) : 91.4 dB (A)
NOTE: The declared noise emission value(s) has
another.
NOTE: The declared noise emission value(s)
exposure.
WARNING:
WARNING:
WARNING: -
-
mined according to EN50636-2-100:
Work mode: operation without load
h) : 2.5 m/s2or less
2
10 ENGLISH
NOTE:
measured in accordance with a standard test method
NOTE:
WARNING:
WARNING: -
For European countries only
to this instruction manual.
SAFETY WARNINGS
WARNING:
Failure to follow the warnings and
-
1.
2.
3. -
4.
1.
2.
3.
-
-
4.
5.
Non-skid,
6.
Protective equipment such
hearing protection used for appropriate conditions
7.
1.
•
•
•
•
2.
3.
4.
5.
6.
7.
8.
9.
10.
11 ENGLISH
11.
•
-
•
•
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26. -
1.
2.
3.
4. -
5.
6.
7.
8.
9.
10. -
11.
12.
Depending on the season or the area,
there is a risk of malfunction due to freezing.
13.
1.
2. -
3.
-
4.
-
5. -
6.
-
7.
-
1.
2.
swallowed.
3.
12 ENGLISH
4.
5.
6.
7.
If
-
8.
9.
10.
-
1.
tool is maintained.
2. Service
manufacturer or authorized service providers.
WARNING:
1. -
2.
or explosion.
3.
4.
-
5.
(1) -
(2) -
(3)
6. -
7.
8.
9.
10.
-
forwarding agents, special requirement on pack-
-
ing an expert for hazardous material is required.
national regulations.
around in the packaging.
11.
12.
-
13.
14.
-
15. -
16.
17.
-
18.
CAUTION:
charger.
13 ENGLISH
1.
2. -
3. -
4.
5.
ASSEMBLY
CAUTION:
-
Align the triangle mark on the end nozzle with the trian-
gle mark on the front pipe, then attach the end nozzle
to the front pipe, and then turn the end nozzle to lock it
into place.
Install the end nozzle so that the tip of the nozzle faces
can install the end nozzle so that the tip of the nozzle is
facing up.
Triangle mark End nozzle Front pipe
To remove the end nozzle, perform the installation
procedure in reverse.
NOTE:
End nozzle Front pipe
Optional accessory
Align the groove on the adapter pipe with the pro-
trusion on the front pipe, then attach the adapter pipe to
the front pipe, and then turn it to lock it into place.
Adapter pipe Front pipe
nozzle with the protrusion on the adapter pipe, then
pipe, and then turn it to lock it into place.
Flat nozzle Extension nozzle Adapter
pipe
Optional accessory
Align the groove on the adapter pipe with the pro-
trusion on the front pipe, then attach the adapter pipe to
the front pipe, and then turn it to lock it into place.
Insert the adapter pipe as far as it will go so that the
pipe.
Screw Hose clamp Adapter pipe
Front pipe
Loosen the screws on the hose clamps, and pass
the large hose clamp through the adapter pipe, and
then pass the small hose clamp.
Connect the extension pipe to the adapter pipe.
Align the groove on the extension pipe with the protru-
sion on the adapter pipe, and then slide the extension
pipe along its groove so that the triangle markings face
each other.
Extension pipe Adapter pipe
Place the hose clamps onto the grooves as illus-
trated and tighten the screws.
Screw Hose clamp
According to the working height, connect the rest
of extension pipes to the extension pipe which has
CAUTION:
Turn the outlet of the end nozzle as shown in the
Connect the end nozzle to the extension pipe.
When connecting, align the triangle marking on the end
nozzle and the extension pipe, and then push the end
nozzle until it clicks. After that, rotate the end nozzle to
End nozzle Extension pipe Triangle
marking
When removing the end nozzle, align the triangle mark-
ings on the end nozzle and extension pipe, and then
pull out the end nozzle from the extension pipe.
End nozzle Extension pipe Triangle
marking
14 ENGLISH
FUNCTIONAL DESCRIPTION
CAUTION:
-
lowing conditions:
on to restart.
overheated, the main power lamp of the machine
machine on again.
WARNING:
To turn on the machine, press the main power switch.
press the main power switch again.
Main power lamp Main power switch
NOTE:
function. To avoid unintentional start up, the main
switch trigger is not pulled for a certain period after
the main power switch is turned on.
NOTE:
the control lever, or release the switch trigger, and
then press the main power switch.
WARNING:
trigger. Release the switch trigger to stop.
Switch trigger
You can use the machine in the Boost mode. In the
normal mode. To use the machine in the Boost mode,
pull the switch trigger until the switch trigger stops in the
Switch trigger
NOTE: Depending on the usage conditions, use of
the Boost mode is restricted to protect the machine.
are using the machine in the Boost mode, the Boost
NOTE:
the control lever.
The cruise control function allows the operator to main-
tain a constant speed without pulling the trigger. To
increase the speed, turn the control lever forward. To
Control lever
machine while pulling the switch trigger, the machine
pull the switch trigger.
15 ENGLISH
OPERATION
CAUTION: -
-
CAUTION:
CAUTION:
CAUTION:
Refer to the instruction manual of
For PDC1200
CAUTION:
Handle
CAUTION: -
CAUTION:
-
Red indicator
For PDC01
NOTE:
-
For PDC1200
Cord Holder
For PDC01
Cord Holder
Attach the cord to the cord holders.
Cord holder
Ring Hook
pack. The main power lamp will light up.
For PDC1200
Main power lamp
For PDC01
Main power lamp
Attach the shoulder harness to the machine using
hanger of the machine.
Hook Hanger
Insert the plug of the machine into the socket of
plug and the socket.
Plug Socket Triangle marking
Press the main power switch to turn on the machine.
Main power switch
NOTE:
CAUTION:
-
corner, start from the corner and then move to wide area.
machine with the other hand.
Buckle
Buckle
Buckle
16 ENGLISH
NOTE:
Claw
CAUTION:
You
CAUTION:
CAUTION:
CAUTION:
CAUTION:
MAINTENANCE
CAUTION:
-
To maintain product SAFETY and RELIABILITY,
NOTICE:
Remove dust or dirt from the suction inlet at the rear of
the machine.
Suction inlet
Storage
pack from the machine, and perform full maintenance.
Store the machine in a place out of the reach of children
and not exposed to moisture, rain, or direct sunlight.
-
nient for hanging the machine from a nail or screw on
the wall.
Hole
TROUBLESHOOTING
-
replacement parts for repairs.
Motor does not run.
Motor stops running after a little use.
Overheating. Stop using the machine to allow it to cool down.
The machine does not reach the
maximum speed.
Motor cannot stop:
Electric or electronic malfunction.
service center for repair.
17 ENGLISH
OPTIONAL
ACCESSORIES
CAUTION:
-
accessories or attachments might present a risk of
for its stated purpose.
-
Center.
• Adapter pipe
• Extension nozzle
• Flat nozzle
• Gutter nozzle set
NOTE:
18 FRANÇAIS
SPÉCIFICATIONS
Modèle : UB001C
Capacités Volume d’air 0 - 17,6 m3/min
0 - 58,0 m/s
Vitesse de l’air (max.) 0 - 70,0 m/s
960 mm/1 010 mm/1 060 mm
Tension nominale 36 V - 40 V c.c. max.
Poids net 2,6 - 2,9 kg
Degré de protection IPX4
• Poids selon la procédure EPTA 01/2014
PDC1200/PDC01
AVERTISSEMENT :
-
L’utilisation de n’importe quel autre support d’alimentation
Veuillez être prudent et rester attentif.
Lire le mode d’emploi.
rotation.
Les cheveux longs risquent de se prendre
Porter des lunettes de protection et un
Ni-MH
Li-ion
Conformément aux directives européennes rela-
tives aux déchets d’équipements électriques et
électroniques et aux piles et accumulateurs ainsi
qu’aux déchets de piles et d’accumulateurs et leur
mise en œuvre conformément aux lois nationales,
-
respectueuse de l’environnement.
EN50636-2-100 :
Niveau de pression sonore (LpA) : 83,4 dB (A)
Incertitude (K) : 2,2 dB (A)
Niveau de puissance sonore (LWA ) : 91,4 dB (A)
Incertitude (K) : 2,5 dB (A)
NOTE :-
de test standard et peuvent être utilisées pour com-
parer les outils entre eux.
NOTE :-
rées peuvent aussi être utilisées pour l’évaluation
préliminaire de l’exposition.
AVERTISSEMENT :
AVERTISSEMENT :
AVERTISSEMENT :
déterminée selon EN50636-2-100 :
h) : 2,5 m/s2ou moins
Incertitude (K) : 1,5 m/s2
19 FRANÇAIS
NOTE :-
de test standard et peuvent être utilisées pour com-
parer les outils entre eux.
NOTE :-
rées peuvent aussi être utilisées pour l’évaluation
préliminaire de l’exposition.
AVERTISSEMENT :
AVERTISSEMENT :
Pour les pays européens uniquement
La déclaration de conformité CE est fournie en Annexe
CONSIGNES DE SÉCURITÉ
AVERTISSEMENT :
Il
sont pas respectées.
-
1.
2. -
3.
-
4. -
1.
2.
3.
-
4.
5.
de sécurité fermées et antidérapantes permet de
6. -
-
Les équipements de sécurité tels que les
de sécurité antidérapantes, les casques ou les
protecteurs d’oreilles utilisés pour les conditions
7.
1. -
•
•
• -
•
20 FRANÇAIS
2.
3.
4.
5.
6.
7.
8. -
9.
10.
-
11.
•
•
•
12.
13. -
14.
15.
-
16.
17.
-
-
18.
19. -
20.
21.
22.
23. -
24.
Le non-respect de cette
précaution pourrait entraîner votre chute ou un fonc-
25.
26.
1.
2.
3.
4.
-
5.
6.
7. -
8.
9.
10.
11.
12.
Selon la saison ou la région, le gel peut
13.
1. -
Un chargeur qui
présenter un risque d’incendie s’il est utilisé avec
Other manuals for UB001C
6
Table of contents
Languages:
Other Makita Blower manuals
Makita
Makita UB002C User manual
Makita
Makita DUB362 User manual
Makita
Makita M4000 User manual
Makita
Makita DUB362Z User manual
Makita
Makita PM7650HG User manual
Makita
Makita M4000 User manual
Makita
Makita UB1102 User manual
Makita
Makita DUB185 User manual
Makita
Makita UB1103 User manual
Makita
Makita EB7660TH User guide
Makita
Makita UB360DWB User manual
Makita
Makita DUB185F001 User manual
Makita
Makita M4000 User manual
Makita
Makita BHX250 User manual
Makita
Makita UB100D User manual
Makita
Makita DUB362 User manual
Makita
Makita BBX7600N User manual
Makita
Makita CBU01 User manual
Makita
Makita UB001C User manual
Makita
Makita EB7660WH User guide
