Makita 4333D Manual

Models No.
Description
PRODUCT
TECHNICAL INFORMATION
CONCEPTION AND MAIN APPLICATIONS
Specification
Standard equipment
Optional accessories
< Note > The standard equipment for the tool shown may differ from country to country.
P 1 / 6
Cordless Jig Saw
4331D, 4333D
The above models have been developed as a series of the
top-handle type of cordless jig saw.
* Model 4331D : 12V type with variable speed control feature
* Model 4333D : 14.4V type with variable speed control feature
WL.2
H
L.1
Dimensions : mm ( " )
Width ( W )
Height ( H )
Length ( L.1 )
70 (2-3/4)
217 (8-1/2)
280 (11)
153 (6)
Length ( L.2 )
The variations of these models are as follows.
4331DWD
4331DWAE
4331DWDE
4333DWD
4333DWAE
4333DWDE
Model No. Battery Charger
*Charging time for
one battery pack
Ni-MH 1234 : 1 pc.
Ni-Cd 1222 : 2 pcs.
Ni-MH 1234 : 2 pcs.
Ni-MH 1434 : 1 pc.
Ni-Cd 1422 : 2 pcs.
Ni-MH 1434 : 2 pcs.
DC1411
DC1411
DC1411
DC1411
DC1411
DC1411
approx.75 min.
approx.75 min.
approx.75 min.
approx.75 min.
approx.60 min.
approx.60 min.
*Charging time for one battery pack: The above time may change, which depends on the conditions
of battery, charger, etc.
Strokes per min.: (min -1= spm)
Model No.
Max.cutting
capacities
in wood: mm (")
in mild steel: mm (")
in aluminum: mm (")
Length of stroke : mm ( " )
4331D 4333D
500 - 2,800 500 - 2,600
26 (1)
65 (2-9/16)
10 (3/8)
20 (13/16)
*Jig saw blade set ....................1 set (including Jig saw blade No.B-10 : 2 pcs., BR-13 : 2 pcs., and B-22 : 2 pcs.)
*Hex wrench 3 ....................... 1 pc.
*Kerf board ....................... 1 pc.
*Plastic carrying case ............. 1 pc.
* Jig saw blades of MAKITA type : No. 1 - 5, No.8 - 10, No.16, No.17, No.41, No.42, No.BR-3
* Jig saw blades of B type : No.51, No.58, 59, B-10 - B19, B-21 - B-27, B16L, BR-13
* Battery 1200, 1202, 1201A, 1220, 1222, 1234, 1235 (for 4331D)
* Battery 1420, 1422, 1433, 1434, 1435 (for 4332D and 4333D)
* Rip fence
* Circular guide
* Protector
* Plastic base plate
* Kerf board set
* Hose set
* Vacuum head
* Battery cover
* Charger DC1411
* Fast charger DC1422
* Fast charger DC1439

Features and benefits P 2 / 6
Speed adjusting dial to select
optimum rpm.to match the various
materials.
Both MAKITA and
BOSCH type jig saw
blades can be attached.
Kerf board can be
attached for burr free
cutting work.
Lock off button
Long life D34 type motor
with externally accessible brushes
Light, but durable
aluminum base plate
Change lever to select orbit cutting action
in 3 stages, and straight cutting action.
Comparison of products
Model No.
Specifications
Manufacturer
Battery Voltage ( V )
Capacity ( Ah )
Equipped motor
Strokes per min.: (min -1= spm)
Length of stroke : mm
Max.cutting
capacities
in wood: mm
in mild steel: mm
65 65
10 10
Orbital action
Net weight :Kg
Blade type
MAKITA
Type blade
BOSCH
Type blade
4331D 4333D
MAKITA
12 14.4
2.0 / 2.6 2.0 / 2.6
D34-30 D34-30
500 - 2,800 500 - 2,600
26 26
Both MAKITA and BOSCH type can be attached.
3-stage + straight 3-stage + straight
2.5 2.9

Comparison of products P 3 / 6
Performance
MATERIAL CUT PER BATTERY CHARGE
Battery used : Ni-Cd Battery 1222, 12V/2.0Ah
Working mode : Full orbit
MATERIAL CUT PER BATTERY CHARGE
Battery used : Ni-Cd Battery 1222, 12V/2.0Ah
Working mode : No orbit
Materials Thickness
Red oak
Particle board
Oak veneered plywood
Oak veneered plywood
3/4" (approx.20m)
3/4" (approx.20m)
3/4" (approx.20m)
1/2" (approx.13m)
Feet
Metric
(approx.)
10
0.3m
20
0.6m
30
0.9m
40
12m
50 60
18m
15m
70
21m
< Cutting length >
Feet
Metric
(approx.)
10
0.3m
20
0.6m
30
0.9m
40
12m
50 60
18m
15m
70
21m
< Cutting length >
MAKITA Mod.4331D
Metabo Mod.EP140
Milwaukee Mod.6267
MAKITA Mod.4331D
Metabo Mod.EP140
Milwaukee Mod.6267
B & D VersaPak
Mod.VP160

Repair P 4 / 6
< 1 > Disassembly and assembly of mechanical parts
Disassemble the gear housing cover from the main tool-body by removing the
four tapping screws 4x18.
1) Gear housing cover
1. Remove thrust plate from slider. (See Fig.2-1.) And then, remove slider by unscrewing
countersunk hd.screw M4x10 with a straight T20 torx bit. (See Fig.2-2.)
So, rod can be removed from gear housing cover. (See Fig.2-3.)
Tapping screw 4x18
Gear housing cover
Fig.1
Fig.2-1
2. Attach holder under flat section of rod. See fig. 3.
3. Attach slider to rod, making sure that the flat surface on the slider matches the flat surface on rod. See Fig. 3.
4. Tighten countersunk hd.screw M4x10 used to hold the slider. See fig. 3.
5. Set thrust plate on slider with the folded ends toward the inside of the gear housing cover. See fig. 3.
Countersunk
hd.screw M4x10
Thrust plate Holder Slider
Gear housing cover
Gear housing
cover Gear housing
cover
Fig.2-2 Fig.2-3
Holder
Rod
Flat section of rod
Slider
Countersunk
hd.screw M4x10
Thrust plate
Fig.3

Repair P 5 / 6
< 2 > Assembly of the parts in housing set
1) Balance plates are not symmetric. Assemble the balance plate as shown in Fig.4.
2)Tighten countersunk hd.screw M4x10 with a straight T20 torx bit for mounting pin 8. Note the alignment of pin 8.
The hole in the center of pin 8 must be positioned in the same direction as the tabs on motor bracket as
shown in Fig. 5.
Countersunk hd.screw M4x10
Motor bracket
Pin 8
Hole
Fig. 5
Tab
Tab
This portion has to be faced to the
lever 17 side.
Lever 17
Fig. 4
Fig. 6
3)Assemble the internal parts as shown in Fig.6, and joint crank complete and helical gear 58
by tightening hex socket hd.bolt M4x16
Hex socket
hd.bolt M4x16
Retaining
ring S-8
Needle
bearing 607
Crank shaft
Flat washer 26
Flat washer 6
Flat washer 6
Flat washer 6
Pin 6
Balance plate
Flat washer 6 Pin 6
Pin 5
Flat washer 5
Flat washer 26
Push plate
helical gear 58

Circuit diagram
Repair P 6 / 6
(Model 4331D and 4333D)
Battery holder
FET
White
Blue
Red
Black
Black
Orange
Yellow
Purple
DC motor
2
3
4) Attach gear housing cover to housing set so that needle baring 607 is aligned with the slot portion of slider.
Slot portion
of slider
Needle bearing 607
Fig. 7
Fig. 6
Gear housing
cover Housing set
Switch
DC Motor
Controller
Fix lead wires
(Blue and Orange)
with lead holder.
Fix lead wires
with lead holder.
Push lead wires (Blue and Orange)
to the bottom of housing to prevent
interference by lock off button.
Switch
Controller
Wiring diagram (Model 4331D and 4333D)