Makita 9564PC User manual

4-1/2", 5" & 6"
ANGLE GRINDERS
PERFORMANCE DRIVEN
INNOVATION
INNOVATION
Lock Spring that joins armature shaft
and spiral bevel gear protects the
gears by absorbing shock
COMFORT
COMFORT
Ergonomic paddle switch
for operator comfort
SJS TECHNOLOGY STOPS THE WHEEL AND HELPS PREVENT GEAR DAMAGE
Powerful 13 AMP Motor Delivers More Output for Increased Performance
Gear Housing can be Rotated 90ºLeft and Right for Cutting and Grinding Applications
Refined Design at Only 4.2 lbs.
Labyrinth Construction Seals and Protects the Motor from Dust and Debris by
Creating a Complex Set of Channels Prohibiting Contamination
Ideal for Welders, Fabricators, Masons, Maintenance/Repair and More
SJS TECHNOLOGY STOPS THE WHEEL AND HELPS PREVENT GEAR DAMAGE
Powerful 13 AMP Motor Delivers More Output for Increased Performance
Gear Housing can be Rotated 90ºLeft and Right for Cutting and Grinding Applications
Refined Design at Only 4.2 lbs.
Labyrinth Construction Seals and Protects the Motor from Dust and Debris by
Creating a Complex Set of Channels Prohibiting Contamination
Ideal for Welders, Fabricators, Masons, Maintenance/Repair and More
makitatools.com
Models
9564PC (4-1/2")
9565PC (5")
9566PC (6")
Models
9564PC (4-1/2")
9565PC (5")
9566PC (6")
DURABILITY
DURABILITY
Protective Zig-Zag varnish seals
the motor from dust and debris
for longer life
Coil Spring
Armature
Shaft
Spiral Bevel Gear
The motor armature and the
spiral bevel gear are
connected by a coil spring.
As the armature starts to
rotate, the coil tightens
around the spiral bevel
gear, which drives the
grinding wheel.
If the grinding wheel should
accidentally catch or bind,
the gears automatically
disengage from the motor.
SJS stops the wheel,
minimizes grinder kickback,
and protects the gears.
SJS - SUPER JOINT SYSTEM

All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
NTF-0108-5M MA-1012-07 For more information, call 1-800-4MAKITA or visit makitatools.com Makita U.S.A., 14930 Northam St., La Mirada, CA 90638
Models 9564PC, 9565PC, 9566PC
Makita offers a wide variety of ANGLE GRINDER accessories. For a complete listing, please refer to the Makita
General Catalog, or visit our website at makitatools.com, or call 1-800-4MAKITA.
FEATURES & BENEFITS
FEATURES & BENEFITS
STANDARD EQUIPMENT
STANDARD EQUIPMENT
■Super Joint System (SJS) helps prevent gear damage
■Powerful 13 AMP motor delivers more output for increased performance
■Gear housing rotates 90ºleft and right for cutting and grinding applications
■Refined design at only 4.2 lbs.
■“Tool-less” wheel guard to help increase productivity
■Labyrinth construction seals and protects the motor from dust and debris by
creating a complex set of channels prohibiting contamination
■Externally accessible brushes for greater serviceability
■Ideal for welders, fabricators, masons, maintenance/repair and more
9564PC
SPECIFICATIONS
SPECIFICATIONS
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIES
9565PC
9564PC 9565PC 9566PC
4-1/2" Grinding wheel (741423-0-1) •
5" Grinding wheel (741407-8-1) •
6" Cutting wheel (724117-A) •
“Tool-less” wheel guard (135107-4) •
“Tool-less” wheel guard (135108-2) •
Cutting wheel guard (165486-6) •
Inner flange (224399-1) ••
Inner flange (224390-9) •
Lock nut (224568-4) ••
Lock nut (224574-9) •
Side handle (153489-2) •••
Lock nut wrench (782424-9) •••
9564PC 9565PC 9566PC
Grinding wheel 4-1/2" 5" 6"
Wire cup brush 3-1/2" 3-1/2" 3-1/2"
Sanding disc 4-1/2" 5" 6"
No load speed 11,500 RPM 11,500 RPM 10,000 RPM
AMPS 13 13 13
Spindle thread 5/8" - 11 UNC 5/8" - 1 UNC 5/8" - 11 UNC
Length 12-1/8" 12-1/8" 12-1/8"
Net weight 4.2 lbs. 4.2 lbs. 4.2 lbs.
UPC 088381-085144 088381-085168 088381-085182
9566PC
4-1/2", 5" & 6" ANGLE GRINDERS
Grinding
Wheel Multi-Disc
Hubbed
Grinding
Wheel
Resin Fiber
Disc
Hubbed
Multi-Disc
Flex
Wheel
Super
Thin
Cut-off
Wheel
Diamond
Blade
Warning: Consult owner/operator manual and adhere to all safety precautions for accessory
items. Always use recommended guards. Failure to do so may result in serious injury or death.
Refer to ANSI B7.1 and owner/operator manual for proper accessory mounting and grinding
procedures and always wear ANSI Z87.1 eye protection.