
10 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: UA003G
Overall length
(without guide bar, battery, and attachment)
2,230 mm
Rated voltage D.C. 36 V - 40 V max
Net weight *1 6.1 kg
*2 6.1 - 7.8 kg
Standard guide bar length 30 cm
Recommended guide bar
length
with 90PX 25 - 30 cm
with 91PX 25 - 30 cm
Applicable saw chain type
(refer to the table below)
90PX
91PX
Standard sprocket Number of teeth 6
Pitch
Chain speed 0 - 20 m/s
(0 - 1,200 m/min)
Chain oil tank volume 160 cm3
Protection degree IPX4
without notice.
*1: Weight, with largest battery cartridge and empty oil tank, and without guide bar, chain, shoulder harness, and
attachment, according to EN ISO11680-1.
depending on the attachment(s), including the battery cartridge.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025 / BL4040* / BL4050F* / BL4080F*
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
Recommended cord connected power source
Portable power pack PDC01 / PDC1200
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.