Makita G1100 User manual

HIGH POWER GENERATORS
PERFORMANCE
Easy starting with an automatic
compression release system. 40%
less pulling force in below 0° weather
*
EFFICIENCY
RELIABILITY
EX Series engines are chain-driven.
Overhead Cam (OHC) with less
moving parts & reduced noise*
MODELS
G1100
G2800L*
G4300L*
HIGH POWER GENERATORS WITH LEADING INNOVATION, TECHNOLOGY
AND ADVANCED FEATURES
Innovative Cooling Design with Large Cooling Fins Engineered into the Crankcase,
Cylinder and Mounting Base
Fully Lubricated System as Timing Chain Carries Oil to Camshaft, Rocker Arms and
Valve Train for Extended Life
Protected with a Built-in Oil Sensor that Shuts off the Ignition if the Oil Level Drops too Low
Cast Iron Cylinder Increases Durability and Extends Engine Performance
Large, Heavy Duty Air and Fuel Filters with High Capacity to Reduce Service Intervals
Durable,Metal Full Cage Tubing Protects Commercial Duty Controls and Engine
HIGH POWER GENERATORS WITH LEADING INNOVATION, TECHNOLOGY
AND ADVANCED FEATURES
Innovative Cooling Design with Large Cooling Fins Engineered into the Crankcase,
Cylinder and Mounting Base
Fully Lubricated System as Timing Chain Carries Oil to Camshaft, Rocker Arms and
Valve Train for Extended Life
Protected with a Built-in Oil Sensor that Shuts off the Ignition if the Oil Level Drops too Low
Cast Iron Cylinder Increases Durability and Extends Engine Performance
Large, Heavy Duty Air and Fuel Filters with High Capacity to Reduce Service Intervals
Durable,Metal Full Cage Tubing Protects Commercial Duty Controls and Engine
QUIET
EX Series engines are extra quiet
with an (OHC) system & rigid muffler
that optimizes the noise level*
CONTINUOUS OPERATION
For more info, call 1-800-4MAKITA
makitaope.com
MODELS
G1100
G2800L*
G4300L*Durable metal fuel tank. Pent-roof
combustion chamber emits less
exhaust emissions for more power*
*
*

Features & Benefits
Features & Benefits
Specifications
Specifications
■Powerful Overhead Cam (OHC) engines for extreme performance and durability*
■Recoil starter system with electronic ignition makes for easy starting
and reliable, consistent service
■Noise levels as low as 59 dB for a quieter working environment and low
vibration level
■Durable metal tank holds up to 4.2 gallons of fuel for longer run time*
■DC output with circuit breakers for consistent electrical flow with
overload protection
■Impact resistant design and full cage metal frame protects
the commercial duty electrical controls and engine from damage
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
NTF-0204-5M MA-0701-03 For more information, call 1-800-4MAKITA makitaope.com
MODEL G1100 G2800L*G4300L*
GENERATOR SPECIFICATIONS
Max. Output Current 1,100W/9.2A 2,800W/23.3A 4,300W/35.8A/17.9A
Rated Output Current 900W/7.5A 2,400W/20.0A 3,700/30.8A/15.4A
AC Output 120V 120V 120V/240V
DC Voltage 12V-8.3A 12V-8.3A 12V-8.3A
ReceptaclesAAA,C,D
ENGINE SPECIFICATIONS
Engine Type OHV OHC OHC
EX Series Engine No Yes Yes
Maximum H.P. 2.5 6.0 9.0
Displacement 85cc 169cc 265cc
Fuel Tank Capacity 1.1 gal. 3.7 gal. 4.2 gal.
Continuous Operation 4.2 hrs. 9.7 hrs. 8.0 hrs.
Noise Level at Rated Output 59 dB 68 dB 71 dB
SIZE
Dry Weight 55 lbs. 95 lbs. 121 lbs.
Dimensions: Length 19-1/2'' 21-1/4'' 22-3/4''
Width 11-3/4'' 17'' 18-1/2''
Height 17-1/2'' 18-3/4'' 20''
Makita offers a wide variety of generator accessories. For a complete listing, please refer
to the Makita General Catalog, or visit our website at www.makitaope.com, or call 1-800-4MAKITA.
Makita U.S.A., 14930 Northam St., La Mirada,CA 90638
Models G1100, G2800L, G4300L
HIGH POWER GENERATORS
AB C D
One Duplex 120-20A GFCI One 120V-20A Locking Receptacle One 120V-30A Locking Receptacle One 120V/240V-20A Locking Receptacle
GFCI Receptacle NEMA L5-20R NEMA L5-30R NEMA L14-20R
NEMA 5-20R
Model G1100
UPC 0 88381 05406 5
Model G2800L
UPC 0 88381 05416 4
Model G4300L
UPC 0 88381 05424 9
Common Application Watts G1100 G2800L G4300L
Radio 50-200 •••
Color TV 300 •••
Hand Drill 600 •••
1/2" Drill 600 •••
HID Lighting 800 •••
14" Electric Chain Saw 1,100 •••
High-Pressure Washer 1,200 ••
15 AMP Circular Saw 1,400 ••
8" Bench Grinder 1,800 ••
Small Window A/C 1,500 ••
10" Table Saw 1,800 ••
Tools & Lights for 1 or 2 Man Crew 2,500 ••
1.5 HP Air Compressor 2,800 ••
2.0 HP Air Compressor 3,200 •
Application Chart
Application Chart