Malekko INVERT MIX User manual

INVERT MIX MANUAL V.1
MALEKKOHEAVYINDUSTRY.COM

!
2!
TABLE OF CONTENTS
SPECIFICATIONS 3
INSTALLATION 4
DESCRIPTION 5
DIAGRAM 6
WARRANTY 7

!
3!
SPECIFICATIONS
FORMAT: 2HP
DIMENSIONS: 15mm deep -EuroRack Standard
MAX CURRENT: 20mA

!
4!
INSTALLATION
1. Remove module from packaging
2. Power down your modular synthesizer and disconnect the power cable from the
wall outlet.
3. Attach the included power cable to the moduleʼs power connector and connect
the other end to the power distribution bus in your EuroRack synthesizer case:
4. Position the module on the mounting rails in your EuroRack case and screw
down mounting screws. Power up! If your case does not turn on properly then
you have installed the module incorrectly. Simply power down and make sure
to follow the diagram when reconnecting the module.

!
5!
DESCRIPTION
MALEKKO INVERT MIX includes 3 audio and/or cv inputs, 3 inverted
outputs as well as an inverted sum and non-inverted sum outs. Invert
waveforms, envelopes etc.
•Three signal inverters (inputs)
•One inverted sum output
•One non-inverted sum output
•Audio and CV signal support

!
6!
REGULAR
AUDIO OR CV
INPUTS
NON-
INVERTED
SUM OUTPUT
INVERTED
SIGNAL
OUTPUTS
INVERTED
SUM OUTPUT

!
7!
!
WARRANTY
This product is covered by the Malekko Heavy Industry warranty, for one year following the date of
purchase. This warranty covers any defect in the manufacturing of this product. This warranty does not
cover any damage or malfunction caused by incorrect use –such as, but not limited to, power cables
connected backwards, excessive voltage levels, or exposure to extreme temperature or moisture levels.
The warranty covers replacement or repair, as decided by Malekko Heavy Industry. Please contact
customer service via our website (www.malekkoheavyindustry.com) for a return authorization.