Malekko SND/RTN User manual

SND/RTN MANUAL V.1
814 SE 14TH AVENUE
PORTLAND OR 97214
USA
www.malekkoheavyindustry.com

TABLE OF CONTENTS
MALEKKOHEAVYINDUSTRY.COM
SND/RTN MANUAL V.1
SPECIFICATIONS 1
INSTALLATION 2
DESCRIPTION 3
HOW TO USE EXAMPLE 4
WARRANTY 5

SPECIFICATIONS
MALEKKOHEAVYINDUSTRY.COM
SND/RTN MANUAL V.1
FORMAT:
EURORACK
DIMENSIONS:
4HP, 30mm deep
INTERNAL AND EXTERNAL SIGNALS (3.5mm jacks):
0-5V Logic I/O
MAX CURRENT:
+12V: 21mA
-12V: 19mA
+5V: n/a
PG. 1

INSTALLATION
MALEKKOHEAVYINDUSTRY.COM
SND/RTN MANUAL V.1
RED STRIPE TO SOLID WHITE LINE
Remove module from packaging.
Power down your modular synthesizer and disconnect the power cable from the
wall outlet.
Attach the included power cable to the module’s power connector and connect
the other end to the power distribution bus in your EuroRack synthesizer case.
Match the red stripe of the cable to the solid white line on back of your unit.
Position the module on the mounting rails in your EuroRack case and screw
down mounting screws. Power up! If your case does not turn on properly then
you have installed the module incorrectly. Simply power down and make sure to
follow the diagram when reconnecting the module.
PG. 2

DESCRIPTION
The SND/RTN module includes ¼ jacks for instrument and line level input with CV
input to modulate the dry/wet mix as well as manual control over send and return
levels (and a clip LED). Marry Malekko pedals and other outboard effects with your
modular in 4hp.
FEATURES INCLUDE:
¼ Instrument or line level input jacks
CV input for modulation of dry/wet mix
Manual control over SEND and RETURN levels
MALEKKOHEAVYINDUSTRY.COM
SND/RTN MANUAL V.1
PG. 3

HOW TO USE EXAMPLE
MALEKKOHEAVYINDUSTRY.COM
SND/RTN MANUAL V.1
PG. 4
1
234
CV INPUT to modulate DRY/WET
amount
DRY/WET manual control
SEND level control
CLIP RETURN LED
RETURN level control
INPUT from modular
OUTPUT to modular

SND/RTN MANUAL V.1
MALEKKOHEAVYINDUSTRY.COM
WARRANTY
PG. 5
This product is covered by the Malekko Heavy Industry warranty, for one year following the
date of purchase. This warranty covers any defect in the manufacturing of this product. This
warranty does not cover any damage or malfunction caused by incorrect use – such as, but
not limited to, power cables connected backwards, excessive voltage levels, or exposure to
extreme temperature or moisture levels. The warranty covers replacement or repair, as
decided by Malekko Heavy Industry. Please visit our website malekkoheavyindustry.com
to obtain full warranty information and to register your product for coverage.