Mamas & Papas bop highchair User manual

1
bop highchair BPHC_0102_0113_V4
IMPORTANT: READ CAREFULLY AND
RETAIN FOR FUTURE REFERENCE
• Donotdiscardanypackaginguntilyouhaveallthecomponentsandttings.
• Readtheinstructionsbeforeconstructingtheproductthenfollowthemstepbystep.
• Youmayndtheconstructionofyourproducteasierwiththehelpofanotherperson.
Parts
INsTRUCTIONs FOR sAFE UsE & MAINTENANCE
IMPORTANT! KEEP FOR FUTURE REFERENCE
• WARNINg: Do not leave the child unattended.
• WARNINg: Ensure that the harness is correctly tted and adjusted when the child is in the
highchair.
• WARNINg: Do not use the high chair unless all components are correctly tted and adjusted.
• WARNINg: Be aware of the risk of open re and other sources of strong heat, such as electric
bar res, gas res etc. in the vicinity of the high chair.
• IMPORTANT: Ensure the tray is secured in position at all times when the child is in the highchair
• This highchair is only suitable for children who can sit up unaided.
• Do not to use the high chair if any part is broken, torn or missing.
• The highchair can be cleaned using warm water and a mild soap. Never use bleach
or abrasive cleaners.
• The highchair is suitable from 6 months to 3 years.
Due to constant updates and improvements some components/ttings may differ slightly from the diagrams in these instructions.
We reserve the right to change the specication of any product without prior notice.
bophighchair
10
Press the catch on the top of the tray
support inwards and lift the tray upwards
off the highchair.
To open the harness, push the locking tabs
inwards (1) and slide the two waist strap tabs
out of the buckle (2).
4
9
Mamas & Papas Ltd, HD5 0RH, UK
mamasandpapas.com
[phone]
/mamasandpapasuk
/mamasandpapasusa
/mamasandpapasmaltaregion
mamasandpapasmagyarorszag
@mamasandpapas mamasandpapasglobal
1-800-490-0331
1300 663 034
1-800-667-4111

6
Slot the hooks on the ends of the tray into the
slots in the sides of the seat (1). Ensure the
feet on the ends of the tray are resting on the
buttons on seat under the tray (2). Push the
tray down until it locks onto the tray support
(3).
Slot the buckles on the ends of the harness
straps through the slots in the seat pad.
Place the seat pad in the seat and slot the
buckles through the slots in the seat.
bophighchair
Attach the tray support to the front of the
seat. Slot the tabs on the back of the support
into slots in the seat (1). Rotate the support
down until the front locks onto the seat (2).
5
7
8
Slot the tabs on the waist straps into the
buckle (1).
To adjust the harness, slide the straps through
the adjusters to the required lengths (2).
3
2
Slot the two back legs into the rear housing
on the seat. Push the pins on the legs inwards
and fully insert into the housing. Ensure the
pins are protruding though the holes in the
housings after tting.
Slot the feet onto the ends of the legs.
Ensure the feet are slotted onto the correct
legs. The base of the feet are marked with
two letters, see diagram for the correct
position.
bophighchair
Attach the two front legs to the seat.
Slot the ends of the legs into the housings
on the seat. Push the pins in the tops of the
legs in and slide into the housings (1), ensure
the ends of bar on the seat insert into the
housings on the legs (2). Ensure the pins are
protruding though the holes in the housings
after tting (3).
1
3
4
AssEMBLY:
Slot the end of the foot rest into the housing
on the underside of the seat. Push the leg rest
in until it locks into the housing.
DIsAssEMBLY:
Push pin ‘a’ towards the footrest to release the
lock and pull the footrest out of the housing.
2