A
B
C
D
Never place your child in
the seat without tting and
adjusting the safety harness.
A: Locking the harness. Push
the shoulder strap catch 1
into the locking catch 2until
it clicks into place. Repeat
the process for the lock on
the other side.
B: Locking the harness. Push
the locking catch 3into the
buckle 4until it clicks into
place. Repeat the process for
the lock on the other side.
C: Releasing the harness
Push the two tabs 5on the
locking catch inwards whilst
pulling the two sections
apart.
D:Adjusting the harness
length To loosen the harness
feed the webbing back
through the locking catch.To
tighten the harness feed the
webbing forward.