mammotome Neoprobe GDS System User manual

Quick Guide for the Neoprobe®GDS System
Utilizing Wireless Probes With Bluetooth®II Technology
Please Turn Over For Further Instructions
2.1.
1. Press Power Button on console.
2. Insert CR123 Lithium Ion Battery in either direction into
probe and close cap.
3. Press Probe Button to power up.
4. Mode Indicator LED on probe will illuminate solid blue.
Powering On The Neoprobe®GDS Console
And Probe
CR123 Lithium
Ion Battery
Probe Button
Endcap
Target
Count
1.
12
Power
2. / 3. 3.
Mode Indicator LED
Probe Button
Linking Wireless Probe To Console For The First Time
1. Console displays “ .”
2. Press and hold Target Count Button on console. Console displays “ . ”
3. Once linked, Mode Indicator LED on probe flashes blue.
®
For additional assistance, please contact:
Mammotome Technical Support: 1-877-926-2666 (Option 3) |Email: T[email protected]

UTILIZING WIRELESS PROBES WITH BLUETOOTH II TECHNOLOGY
Quick Guide for the Neoprobe®GDS System
Utilizing Wireless Probes With Bluetooth®II Technology
2A Linking Wireless Probe To Console
(Subsequent Links To Same Unit)
1.
1.
2.
2.
1. To conserve battery power, probe will go into sleep mode if
no radiation has been detected or if the Probe Button has not
been pressed for 10 minutes.
2. Press Probe Button to “awaken.” Probe will automatically
relink to console within five seconds.
Relinking The Probe After Sleep Mode
2B
Probe
Button
1. Press Power Button on console. Confirm “ ” is
displayed on the screen.
2. Power up probe by pressing Probe Button. It will automatically
link to console within five seconds.
Probe
Button
Power
© 2022 Devicor Medical Products, Inc . All rights reserved. Mammotome and Neoprobe are registered trademarks of Devicor Medical Products, Inc. in the USA and
optionally in other countries. Other logos, product and/or company names might be trademarks of their respective owners. MDM# 150032 Rev 05/22