Manhattan Comfort 9GMC1 User manual

Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]
Tall Cabinet
Model: 9GMC1 / 9GMC2 / 9GMC3 / 9GMC4
Assembly Guide
1000010414 - 31/07/2019

In order to ease the assembly,
you should separate and identify the parts first
Do not place the parts directly onto the floor.
Use a cardboard sheet or a mat to place the
parts, during the separation and assembly.
*Tools Needed (not supplied)
IMPORTANT
In order to avoid severe or even fatal injuries, follow the
instructions carefully.
IDENTIFICATION OF PARTS
Nº
DESCRIPTION
BLACK
MATT
WHITE MATT BLUE GRAY MATERIAL LENGTH WIDTH THICKNESS
P1 LEFT SIDE SM ART 3000009160 3000009313 3000009263 - STEEL 1 PC 25,31'' 13,74'' 0,67''
P2 RIGHT SIDE SM ART 3000009161 3000009314 3000009265 - STEEL 1 PC 25,31'' 13,74'' 0,67''
P3 CEILING 1 DOOR SM ART 3000009414 3000009412 3000009408 - STEEL 1 PC 13,70'' 13,62'' 0,94''
P4 REA R 1 DOOR SM A RT 3000009154 3000009308 3000009267 - STEEL 1 PC 13,74'' 13,43'' 1,26''
P5 SHELF SM ART 3000009151 3000009317 3000009268 - STEEL 1 PC 13,74'' 12,80'' 0,63''
P6 B A CK 1 DDOR SM ART 3000009164 3000009320 3000009269 - STEEL 1 PC 24,02'' 12,87'' 0,67''
P7 DOOR RIGHT SM A RT 3000009318 3000009353 3000009270 3000009157 STEEL 1 PC 23,70'' 12,24'' 0,63''
P8 FRAM E SM ART FRONT 3000009172 3000009309 3000009272 - STEEL 2 PC 13,74'' 8,74'' 0,59''
QUANTITY
IDENTIFY THE COLOR OF YOUR CABINET
DIMENSION

Lbs
Maximum weight
supported distributed
ASSEMBLED PRODUCT:
H: 29.92'' W:13.77'' L:13.77''
H
L W
P1
P6
P7 P2
P3
P5
P4
P8 P8
22 Lbs
22 Lbs
22 Lbs
DOOR
LEFT SIDE
RIGHT SIDE
BACK
CEILING
REAR
SHELF
FRAME FRAME

01
01
Hardware list
F1
1000008297
Qty. 2
F2
1000008616
Qty. 2
F3
1000009033
Qty. 1
F5
1000010136
Qty. 1
F6
1000008285
Qty. 2
F8
1000008285
Qty. 1
F4
1000000281 - WHITE
1000007352 - BLACK
1000010221 - BLUE
Qty. 2
F7
3000009645 - WHITE
3000009643 - BLACK
3000009649 - BLUE
3000009647 - GREY
Qty. 1
LEFT SIDE
RIGHT SIDE
FRAME
FRAME
1 - Attach the part on the and parts in FRAME LEFT SIDE RIGHT SIDE
the indicated direction.

01
03
01
02
1 - Check the alignment of the holes
on the fitted parts.
2 - The hole in the horizontal bar
of part , should be up. FRAME
4x 1 - With the end of F3, smash the safety claw,
locking part to part FRAME LEFT SIDE
and . RIGHT SIDE
F3
LEFT SIDE
RIGHT SIDE
FRAME
LEFT SIDE
RIGHT SIDE
FRAME
FRAME

01
05
01
04
1 - Identify the cutout on the top end of the part. BACK
2 - Attach the LEFT SIDE, BACK part on the
RIGHT SIDE FRAME and parts.
3- Slide part BACK to support on parts
LEFT SIDE and RIGHT SIDE.
2x 1 - With the end of F3, smash the safety claw,
locking part to part LEFT SIDE BACK
and RIGHT SIDE.
F3
LEFT SIDE
RIGHT SIDE
FRAME
BACK
BACK
BACK

01
07
01
06
1 - Attach the joint of the front of the part under the part.REAR FRAME
2 - Lower the part as indicated. REAR
1 - Check all the fittings before moving forward.
REAR
REAR
REAR

01
08
1x
1 - Attach the part on the CEILING
parts and .LEFT SIDE RIGHT SIDE
2 - Pull the front of the P3 part.
CEILING
CEILING
CEILING

01
10
01
09
2x
2x 2x
1 - With the end of F3, smash the fety
claw, locking part to part .CEILING BACK
F3
1- Slightly turn the part and place it inside the cabinet, as indicated.SHELF
2- Check all the fittings before continuing.
CEILING
SHELF

01
12
01
11
2x
1 - Lay the cabinet against the wall and mark the hole.
IMPORTANT: CABINET MUST BE ATTACHED TO THE WALL
1 - Drill the wall on the marked point,
using a ½” drill bit.
½”

01
13
F1
2X
1 - Insert the metal part of the bushing into
the hole until it overcomes the wall.
WALL
2 - Pull the bushing driving it against
the wall and then push the plastic
ring until it leans close to the wall
WALL
Plastic ring
3 - Break the bushing's rods
WALL
1
WALL
2
WALL

01
15
01
1416
F2
2X
F3
1X
F4
2X
2x
2x
F4
F2
F3
1 - Insert the screw F2 into the hole of part BACK
2 - Turn screw F2 with part F3 clockwise
3 - Press part F4 against the heads of the F2 screws.
F5
1x
F5
1X
1 - Attach the F5 into the part.FRAME

01
17
01
1616
DOOR
1 - Attach the F7 handle to the door as indicated belowDOOR
F7
CLICK !
F7
F7
1X
DOOR
F6
F6
2X
1 - Attach the F6 into the holes. DOOR
F6
1x
1x

01
19
01
18
F5
1 - Attach part to the bottom of the cabinet through part DOOR DOOR
2 - Finish engaging part through the pivoting wrenchDOOR
as shown below.
F8
1X
F8
1 - Glue F8 to part in the indicated area.. DOOR
DOOR
DOOR

ATTENTION
To avoid serious or irreparable damage to the product, follow the instrucons carefully.
TAKING GOOD CARE OF YOUR CABINET
Cleaning and caring instructions:
- Avoid dragging objects on top of the cabinet. They might scratch the
finishing.
- Only non-abrasive natural chemical products are recommended to clean
your cabinet. Simply wipe the cabinet down with a wet cloth to remove the
cleaning product excess.
- Never clean the cabinet with scouring powders, steel scrubber pads or
any other product which can scratch its surface.
- Chemical products are not recommended.
- Cabinet surfaces should not be covered with colored plastic or paper
sheets.
- Acid substances like salt, onion, ketchup and mustard must remain
properly stored in sealed containers.
- Avoid the direct contact of water with other surfaces than the sink, as the
humidity can affect the durability of the cabinets.
- Avoid cabinets exposure to direct Sun light. Drapers suggested.
- For technical assistance outside Brazil, please, contact the store where
you purchased your product.
- This guidance should be saved for future reference, if necessary.
BEWARE: Do not use a damp cloth to clean the cabinet. Excessive
moisture can damage its surface.

WARRANTS TERMS
This product has the guarantee for a period of twelve (12) months, this limited warranty is effective from the date
of the original consumer purchase. Proof of original purchase date is required to obtain service or replacement
under this limited warranty. Once the defect of manufacture has been verified, the consumer should contact the
store where he purchased the product. In the warranty period, any defective parts will be replaced free of
charge by another of the same line and model. The installation and assembly in the residence of the costumer is
not the responsibility of the factory or the store. The assembly must correctly follow the instructions inside the
packaging of each module.
ITEMS EXCLUDED FROM WARRANTS
This limited warranty does not cover:
1. In-home service including, but not limited to, service calls to correct the installation of any Manhattan Comfort
Smart Diy products or to instruct the consumer on how to use or install them.
2. Damage resulting from improper handling or shipping of products, or products damaged by accident,
alteration, misuse, abuse, fire, flood, improper installation, acts of God, neglect, corrosion, modification or
mishandling.
3. All travel, transportation, shipping or freight fees to deliver replacement products or to return defective
products.
4. Factory specified replacement parts or product replacement when your product is used in other than normal,
single-family household use, such as a commercial environment or handled in a manner contrary to published
user or operator instructions and/or installation instructions.
5. Aesthetic damages including scratches, dings, dents or cracks that do not affect the structural or functional
capability of the product.
6. Any labor costs during the limited warranty period.
7. Damage resulting from improper loading beyond the specified maximum weight capacity outlined in the
assembly instructions provided with the product including overloading of hooks, baskets, shelves, cabinets,
and other Manhattan Comfort Smart Diy accessories used with the product.
8. Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal.
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.
DISCLAIMER OF IMPLIED WARRANTY
Implied warranties, including any implied warranty of merchantability or implied warrant of fitness for a
particular purpose, are limited to one year or shortest period allowed by law.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
Your sole and exclusive remedy under this limited warranty shall be product repair as provided herein.
Manhattan Comfort Smart Diy shall not be liable for incidental or consequential damages.
Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]