Manhattan Comfort Tribeca User manual

888-230-2225
[email protected]
319 RIDGE RD, DAYTON, NJ08810, NEW JERSEY - UNITED STATES
Tribeca
TV Stand 53.94"

Dimension:
W: 53.94" H: 26.77" D: 15.75"
Technical information
Maximum supported weight
11Lb
ASSEMBLY VIDEO
Tools needed (not included)
11Lb
22Lb
8"

M
ADE G
HI
HARDWARE
18x B06x C06x 06x F10x
D32x 04x
03x 03x 04x
J01x K30x L04x
FRONT VIEW REAR VIEW
01
02
06
04
10
09
05
10
08
PART
DESCRIPTION
QUANTITY
01
TOP
01
02
RIGHT SIDE
01
03
SHELF
01
04
PARTITION
01
05
LEFT SIDE
01
06
BASE
01
07
FEET
04
08
BACK COVER
01
09
TILTING DOOR
01
10
DOOR
02
07
07
07
03

STEP 3
3
STEP 1
STEP 2
- Insert the hardware (B) into the part (01).
- Insert the hardware (F) into the parts (02, 03, 04, 05).
- Connect the part (02) onto the part (01) with the hardware (C).
- Connect the part (03) onto the part (02) with the hardware (A).
- Connect top (01) into parts
(04, 05) with hardware (C).
- Connect the parts (03, 04) with the
hardware (A).
F
F
F
F
F
F
B
B
B
B
B
BF
F
F
F
A
C
C
C
C
A
A
01
05
04
02 03
01
02
03
04
05
B06x
F10x
A02x
C
02x
C
04x
03
A02x

- Connect the parts (07) under the part (06) with
the hardware (A).
STEP 4
STEP 5
4
STEP 6
- Connect the hardware (J) onto the part (06) with
the hardware (L).
L
L
L
L
J
Observe the right
feet (07) position.
Put the part (06) in the
correct position to start
assembling.
06
06
L04x
A
08x
07
07
07
07
06
A
A
A
A

STEP 7
STEP 8
5
STEP 9
- Connect the hinges (E) into the
parts (09, 10) with the hardware (D).
09
10
10
12x D
- Connect the part (08) with the hardware (K).
A
AA
A
AA
A
AA
08
A06x
K
30X
06
02
04
05
- Connect the part (06) onto the parts (02, 04, 05)
with the hardware (A).
DD
DD
DD
DD
DD
DD

STEP 10
STEP 11
6
STEP 12
- Fix the hinge connector (E) of the
door (09) on the part (06) with the
hardware (D+G).
- Apply the hardware (M)
on the part (03).
H
H
H
I
I
I
09
10
10
03x
H
Observe the right
hardware (I) position.
Detail hardware (G).
M
D
DM
- Fix the hinge connector (E) of the
doors (10) on the part (04, 05) with the
hardware (D), taking the markings
as reference for correct positioning.
- Apply the hardware (M)
on the part (06).
D
D
D
D
MM
09
10
10 04
05
16x D
DGG
D
G
G
D
D
D
G
04x
03
06
06
04x D

7
Doors adjustment process
To adjust the alignment of the doors loosen
the indicated screw and adjust the 3 hinges
up or down on each door, and after aligned
retighten all the screws.
To adjust the distance between the doors
turn the indicated screw to the clockwise
or counterclockwise.
To adjust the nearby of the doors of the product
loosen the indicated screw and adjust the hinges
forward or backward, then retighten the screw.
It is necessary to check all the hinges!
After finishing the adjustments to reinstall
the front screws to lock the hinges.