Manhattan Comfort Tribeca TV Stand 35.43 User manual

Tribeca TV Stand 35.43

1
Before starting
Prepare the room before starting the assembly,
leaving it completely clean and the area in
good condition to start the work.
Use the cardboard of the packaging and
the foam sheets protection to separate and
support the parts removed from the boxes.
22
Lb
11
Lb
11
Lb
11
Lb
Dimension:
W: 35.43" H: 26.57" D: 15.75"
QUANTITY OF PEOPLE
TO ASSEMBLE THIS
FURNITURE
REQUIRED TOOLS

2
10
PART DESCRIPTION QUANTITY
01 TOP 01
02 RIGHT SIDE 01
03 SHELF 01
04 PARTITION 01
05 LEFT SIDE 01
06 BASE 01
07 FEET 04
08 BACK COVER 01
09 TILTING DOOR 01
10 DOOR 01
09
02
01
03
06
04
05
07
07
07
08
KL
ADE
GHI
J
HARDWARE
10x B06x C06x 02x
F02x
D12x
02x 02x 24x
04x 04x 01x
GLUE
FRONT VIEW REAR VIEW
M04x
N04x
O04x

33
STEP 3
B
B06x
B
B
B
B
B
01
STEP 2
STEP 1
- Insert the hardware (B) on the piece (01).
A
A
03
02
04
04x
A
- Connect the parts (02, 03 and 04) with bolts (A).
01
03
02
05
04
06x
C
C
C
- Connect top (01) into parts (02, 04 and 05) with hardware (C).

4
- Insert the hardware (J) in the base (06)
- Fix the feet (07) under the base (06) with bolt (N).
- Apply the plastic covers (M) on top of the bolts (N).
STEP 4
STEP 5
4
L
07
Use the glue (L) before
fastening the feet (07).
STEP 6
A06x
06
A
A
A
AA
A
- Fix the piece (06) under the part assembled on step 3, using bolt (A).
08
30X
I
- Connect back cover (08) with nails (I).
06
07
07
07 07
04x
J04x
J
J
N
N+M
N+M
N+M
N+M
04x
M

5
STEP 7
STEP 8
5
STEP 9
F+2D
F+2D
09
D04x
F
02x
- Fix the hinges (E) in the door (10) with
bolts (D).
- Fix the hinges (F) in the
door (09) with bolts (D).
- Fix the handles (H) in the doors (09 and 10) with bolts (G).
09
10
- Fix the hinge connectors (E and F) of the
doors (09 and 10) on the parts (05 and 06)
with bolts (D and K), taking the markings as
reference for correct positioning.
- Apply the hardware (O) on the parts (03 and 04).
05
06
G
09
H
01x
G01x
H
2D
2D
2K
2K
D
04x
04x
K
10
D
04x
E
E+2D
E+2D
H
G
02x 01x
10
G
H
O
O
O
O

Tribeca TV Panel 35.43

Before starting
Prepare the room before starting the assembly,
leaving it completely clean and the area in
good condition to start the work.
Use the cardboard of the packaging and
the foam sheets protection to separate and
support the parts removed from the boxes.
44
Lb
1
Dimension:
W: 35.43" H: 35.43" D: 7.08"
QUANTITY OF PEOPLE
TO ASSEMBLE THIS
FURNITURE
REQUIRED TOOLS
4Lb

05
PART DESCRIPTION QUANTITY
01 LOWER PANEL 01
02 TOP PANEL 01
03
BACK SUPPORT
01
04
PANEL SUPPORT
02
05
WALL SUPPORT
01
06
SHELF
01
01
02
04
04
03
2
05
06
A
DE G
HARDWARE
12x B04x C01x
01x F02x
D01x
02x
GLUE
H06x
FRONT VIEW REAR VIEW

STEP 3
3
STEP 2
- Insert hardware (H) into parts (01 and 02).
STEP 1
- Join the panels (01 and 02) correctly aligning the edges, avoiding gaps between the parts and connect them
with the steel plate (C) and bolts B.
03
- Fix the piece (03) in the top panel (02) with bolt (A).
E
03
USE GLUE (E) ON THE FACE CONTACT
OF THE PIECE (03) BEFORE FIXING
AT THE PANEL (02).
A
A
A
A
A
04X
C
B
B
B
B
01
02
C+4B
H
H
H
H
H
04X
- Fix the parts (04) behind the panel (01 and 02) with bolt (A), observing the right position of the finished edges
and correctly aligning as show in the drawing.
A
A
A
A
A
A
A
A
04
04
A
08X
DETAIL
04
H
H

STEP 5
4
STEP 4
06
With a pencil and measuring
tape mark the height to
fasten the part (06) on the wall.
STEP 6
05
01X
D
G
G
G
02X
- Connect the shelf (05) in the top panel (02) with the
bolts (G) and dowels (H).
- Insert the plastic part (D) in the panel (01).
H
02X
Drill the wall with one twist bit drill of
1/2 inches.
H
t (F):
o
w
the drywall toggle bol
to use
To push against
the wall
Insert the bolt and toggle
into hole
H
H

5
- Verifying all the supports you are
ready to hang your TV panel on the wall.
STEP 7
STEP 8
05 F02X
F
F
06
Fasten the part (06) on the wall and
keep the 45° degree cut to up side.
Toggle bolt screw