Manhattan Comfort 8GMC1 User manual

Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]
Nightstand
Model: 8GMC1 / 8GMC2 / 8GMC3 / 8GMC4
Assembly Guide
1000010415 - 31/07/2019

In order to ease the assembly,
you should separate and identify the parts first
Do not place the parts directly onto the floor.
Use a cardboard sheet or a mat to place the
parts, during the separation and assembly.
*Tools Needed (not supplied)
IMPORTANT
In order to avoid severe or even fatal injuries, follow the
instructions carefully.
IDENTIFICATION OF PARTS
Nº
DESCRIPTION
BLACK
MATT
WHITE
MATT
BLUE GRAY MATERIAL LENGTH WIDTH
THICKNES
S
P1 LEFT SIDE SM ART 3000009189 3000009322 3000009279 - STEEL 1 PC 15,43'' 13,74'' 0,67''
P2 RIGHT SIDE SM ART 3000009202 3000009323 3000009280 - STEEL 1 PC 15,43'' 13,74'' 0,67''
P3 CEILING 1DOOR SM ART 3000009180 3000009306 3000009277 - STEEL 1 PC 13,74'' 13,70'' 0,94''
P4 REAR 1 DOOR SM ART 3000009154 3000009308 3000009267 - STEEL 1 PC 13,70'' 13,43'' 1,26''
P5 B A CK 1 DOOR SM ART 3000009197 3000009325 3000009281 - STEEL 1 PC 14,13'' 12,87'' 0,67''
P6 DOOR RIGHT SM ART 3000009326 3000009355 3000009282 3000009192 STEEL 1 PC 13,82'' 12,24'' 0,63''
P7 FRAM E SM ART FRONT 3000009172 3000009309 3000009272 - STEEL 2 PC 13,74'' 8,74'' 0,59''
QUANTITY
IDENTIFY THE COLOR OF YOUR
CABINET
DIMENSION

Lbs
Maximum weight
supported distributed
ASSEMBLED PRODUCT:
H: 20.07'' W:13.77'' L:13.77''
LW
H
22 LBs
22 LBs
P3
P1
P2
P5
P4
P7
P6
LEFT SIDE
CEILING
BACK
REAR
RIGHT SIDE
FRAME
DOOR

01
01
1 - Attach the part on the and parts in the FRAME LEFT SIDE RIGHT SIDE
indicated direction.
Hardware list
F1
1000008297
Qty. 2
F2
1000008616
Qty. 2
F3
1000009033
Qty. 1
F5
1000010136
Qty. 1
F6
1000008285
Qty. 2
F8
1000008285
Qty. 1
F4
1000000281 - WHITE
1000007352 - BLACK
1000010221 - BLUE
Qty. 2
F7
3000009645 - WHITE
3000009643 - BLACK
3000009649 - BLUE
3000009647 - GREY
Qty. 1
LEFT SIDE
RIGHT SIDE
FRAME

01
03
01
02
1 - Check the alignment of the holes on the fitted parts.
2 - The hole in the horizontal bar of part , should be up. FRAME
4x 1 - With the F3 end, smash the safety grappel,
locking the part to the FRAME LEFT SIDE
and part. RIGHT SIDE
F3
FRAME
LEFT SIDE
RIGHT SIDE
FRAME

01
05
01
04
2 - Attach the part on the , BACK LEFT SIDE
RIGHT SIDE FRAME and parts.
2x 1 - With the end of F3, smash the safety claw,
locking part to part BACK LEFT SIDE
and .RIGHT SIDE
F3
LEFT SIDE
RIGHT SIDE
FRAME
1 - Identify the cutout on the top end of the part. BACK
3- Slide part to support on parts BACK
LEFT SIDE RIGHT SIDE and .
BACK
BACK
BACK

01
07
01
06
1 - Attach the joint of the front of the part under the part.REAR FRAME
2 - Lower the part as indicated. REAR
1 - Check all the fittings before moving forward.
REAR
FRAME

01
08
1x
1 - Attach the part on the parts CEILING
and . LEFT SIDE RIGHT SIDE
2 - Pull the front of the part.CEILING
CEILING
CEILING
CEILING

01
10
01
09
2x 2x
2x
1 - With the end of F3, smash the fety
claw, locking part to part .CEILING BACK
F3
2x
1 - Lay the cabinet against the wall and
mark the hole.
IMPORTANT: CABINET MUST BE ATTACHED TO THE WALL

01
12
01
11
½”
1 - Drill the wall on the marked point, using a ½” drill bit.
F1
2X
1 - Insert the metal part of the bushing into
the hole until it overcomes the wall.
WALL

01
13
1 - Pull the bushing driving it against the wall and then
push the plastic ring until it leans close to the wall
WALL
Plastic ring
2 - Break the bushing's rods
WALL
1
WALL
2
WALL

01
15
01
14
2x
2x
F4
F2
F3
F2
2X
F3
1X
F4
2X
1 - Insert the screw F2 into the hole of part .BACK
2 - Turn screw F2 with part F3 clockwise.
3 - Press part F4 against the heads of the F2 screws.
1x
F5
F5
1X
1 - Attach the F5 into the part.FRAME
FRAME

01
17
01
1616
F7
1X
1 - Attach the F7 handle to the as indicated belowDOOR
F7
CLICK !
F7
F6
1x
F6
2X
F6
1x
1 - Attach the into the P6 holes.DOOR
DOOR
DOOR

01
19
01
18
1 - Attach part to the bottom of the cabinet through part F5DOOR
2 - Finish engaging part through the pivoting wrenchDOOR
as shown below.
F8
F8
1X
1 - Glue F8 to part in the indicated area.DOOR
F5
DOOR
DOOR

ATTENTION
To avoid serious or irreparable damage to the product, follow the instrucons carefully.
TAKING GOOD CARE OF YOUR CABINET
Cleaning and caring instructions:
- Avoid dragging objects on top of the cabinet. They might scratch the
finishing.
- Only non-abrasive natural chemical products are recommended to clean
your cabinet. Simply wipe the cabinet down with a wet cloth to remove the
cleaning product excess.
- Never clean the cabinet with scouring powders, steel scrubber pads or
any other product which can scratch its surface.
- Chemical products are not recommended.
- Cabinet surfaces should not be covered with colored plastic or paper
sheets.
- Acid substances like salt, onion, ketchup and mustard must remain
properly stored in sealed containers.
- Avoid the direct contact of water with other surfaces than the sink, as the
humidity can affect the durability of the cabinets.
- Avoid cabinets exposure to direct Sun light. Drapers suggested.
- For technical assistance outside Brazil, please, contact the store where
you purchased your product.
- This guidance should be saved for future reference, if necessary.
BEWARE: Do not use a damp cloth to clean the cabinet. Excessive
moisture can damage its surface.

WARRANTS TERMS
This product has the guarantee for a period of twelve (12) months, this limited warranty is effective from the date
of the original consumer purchase. Proof of original purchase date is required to obtain service or replacement
under this limited warranty. Once the defect of manufacture has been verified, the consumer should contact the
store where he purchased the product. In the warranty period, any defective parts will be replaced free of
charge by another of the same line and model. The installation and assembly in the residence of the costumer is
not the responsibility of the factory or the store. The assembly must correctly follow the instructions inside the
packaging of each module.
ITEMS EXCLUDED FROM WARRANTS
This limited warranty does not cover:
1. In-home service including, but not limited to, service calls to correct the installation of any Manhattan Comfort
Smart Diy products or to instruct the consumer on how to use or install them.
2. Damage resulting from improper handling or shipping of products, or products damaged by accident,
alteration, misuse, abuse, fire, flood, improper installation, acts of God, neglect, corrosion, modification or
mishandling.
3. All travel, transportation, shipping or freight fees to deliver replacement products or to return defective
products.
4. Factory specified replacement parts or product replacement when your product is used in other than normal,
single-family household use, such as a commercial environment or handled in a manner contrary to published
user or operator instructions and/or installation instructions.
5. Aesthetic damages including scratches, dings, dents or cracks that do not affect the structural or functional
capability of the product.
6. Any labor costs during the limited warranty period.
7. Damage resulting from improper loading beyond the specified maximum weight capacity outlined in the
assembly instructions provided with the product including overloading of hooks, baskets, shelves, cabinets,
and other Manhattan Comfort Smart Diy accessories used with the product.
8. Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal.
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.
DISCLAIMER OF IMPLIED WARRANTY
Implied warranties, including any implied warranty of merchantability or implied warrant of fitness for a
particular purpose, are limited to one year or shortest period allowed by law.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
Your sole and exclusive remedy under this limited warranty shall be product repair as provided herein.
Manhattan Comfort Smart Diy shall not be liable for incidental or consequential damages.
Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]